Learn Photoshop

Photo Name: Photoshop,


Photo name: bring up the photo a soft blue and yellow - a simple way,
1, open the original image material, press Ctrl + J to copy the background layer to layer, point channel panel, select the blue channel, image> apply image, layer as the background, mixed to Multiply, Opacity 50%, RP tick,
2, back to the Layers panel, create a curves adjustment layer, and blue channels: 44,182, ruddy channel: 89,108
3, create a new layer, fill it with black layer blending mode to Multiply, Opacity to 60%, select the Elliptical Marquee tool constituency middle segment, reception Ctrl + Alt + D Feather with a value of 70, and then double-click the Delete key to cancel, then melodrama on words to complete the last effect.


Photo name: bring up the photo a beautiful red and yellow,
1, open the original image material, Ctrl + J to copy the background layer to layer, press Ctrl + Shift + U to color, Execution: Filter> Blur> Gaussian blur, number 4, layer blending mode to Screen, the layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E back layer, layer blending mode to color. 3, create a gradient map adjustment layer, violet - orange, Alt + Ctrl + G with a clipping mask.
4, create a brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 create a Levels adjustment layer, 8,1.00,255
7, create an optional color adjustment layer, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, White: -5,0,0,0,


Photo Name: publicity to create beautiful ice-blue tones,
1, doing the figure before of the graph: Image - Adjustments - Auto Levels, Auto Contrast, Auto Color adjustment,
2, open the original image, copy the background layer,
3 , the new hue saturation adjustment layer, red: -80, yellow: -80 blue: +32
4, color balance: -20, +20, +50
5, curve adjustment, value: 38, 36
6, hue saturation, blue: -45
7, optional colors, blue: -10, +20, +24,0, blue: +20,0, +10,0, neutral colors: (black) +5, black: (black) +5
8, load the blue channel selection, making the curve adjustment, the value: 74,119
9, brightness, contrast: 0, +10
10, seal all the layers, (Ctrl + Shift + Alt + E), to carry out resurfacing and other easy images softened,
11, to start the background copy layer Sticky copy, miscellaneous mode Soft Light, opacity 25%
12, re-stamp all the layers, apparent with lighting effects, filter - render - lighting effects, opacity 50%, other values ​​to default values. Add a mask, the exposure over the place back rub,
13, brush on your favorite brush, add text, complete


Photo Name: elaborate water on the woman,
1, open the original image material, the 1st hook with the pen tool to figure out, press Ctrl + Enter the path to selection, press Ctrl + J to copy characters to the new layer.
2, press Ctrl + M to adjust the curve of the cutout character, values: 47,60
3, create a new layer, fill color: # 0A6A60
4, the figure on the skin to the brain of this half to pull out, to the new layer.
5, the foreground color set to green, (water color mapping can be set according to need), set the background to white, select the menu: Image> Adjustments> Gradient Map. Adjust the images are monochrome chiaroscuro.
6, Filter> Artistic Effects> plastic packaging, data adjusted according to individual needs to be done, the main effect is the extraction of high-light some of the water, so the plot is very water do people assume the face of high light adjust the density and degree of evacuation, according to the characteristics of the water, people can receive the information the eye is the only high-light the darkest part of the other part is transparent.
7, select the layer 3 copy, press Ctrl + Alt + Shift + ~ to bring up high-light selection, press Ctrl + Alt + Shift mouse click on the layer 3 copy, so the people outside the constituency to lose, then the new map 4 layers filled with white.
8, hold down the Ctrl key and click on the layer 4 switch into the selection, press Ctrl + Shift + I invert the selection and press Delete to delete, clean, delete a few more points.
9, the layer 4 to selection, select the layer 3 copy, point mask button (which can conceal the shadow layer). Then brush the excess high light on the character wipe, 3 copies of the same layer mask is also set up, wipe the excess high light.
10, layer 3 is set to Drops material to find online.
11, it is best to find the water black background material, if it is white or other colors of the water background material, can reduce or reverse the saturation of the background to black, set the color filter layer properties will Black masked, leaving only the white transparency of the water, when the collage to see the direction of the water to find a suitable location collage up to take advantage of the mask to the interface between water, people place the root handle.
12, the background color of the final deal.


Photo Name: making a terror movie,
broken glass brush: Broken Glass brush
blood brush: Blood smudge brush.
1, press CTRL + U to adjust hue / saturation, color tick, value: 220,26, -9
2, change the eye color, use the Lasso tool to select the eyes. Then adjust the hue / saturation, color tick, value: 117,47,7
3, using a 13px -15 px brush in eye eclipse around the drawing, set the black mode to Multiply, opacity 25 %, flow 25%, draw around the eyes, the same method to modify the lips.
4, create a new layer, fill color # 31425e,
5, broken glass pen to draw.
6, add layer styles, projection, Multiply, Opacity 75%, angle 120 °,
7, CTRL + E Merge layers, with the lasso tool to select the broken area, change the opacity to 80 %, replica the layer, adjust the mode to Multiply,
8, Filter - Render - Lighting Effects, points of light, intensity 53, Focus 69,
9, the final brush to draw some blood and then blood


Photo Name: Photoshop ingenious synthesis poster printer,
1, turn on the background material and the printer, the printer to pull out, copy came in the appropriate position gracefully.
2, open the leopard material, drag the appropriate adjustments come in good size and angle, with the pen tool to pull out of leopards to the new layer.
3, with the pen tool tick printer paper outlines the path to selection, press Ctrl + Shift + I invert the selection and press Delete to delete,
4, the paper layer to the stroke, then Jiameng version to In addition to excess,
5, the top layer of paper to create a new layer, right front foot leopard with a black pen to draw the shadow, the shadow of printers and paper, due to lower transparency,
6, more need to add the final advertisements and text to complete the final results.


Photo name: bring up the nostalgic outlook photographs,
1, open the original image, copy the layer
2, curve adjustment, the value RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance , values: 0,0, -34
5, optional colors, neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56 %,
7, the clouds pull material into the figure, the top into the artwork, soft light layer mode, the outside part of the sky in addition to wipe out, back layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, layer mode exclusion, to copy a layer, filling 52%
10, curve adjust the value RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, Levels, value: 29,1.00,227, filling 58%
13, one optional color, independent colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color equilibrium, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, Sharpen approximately


Photo Name: the real picture transmit plaster sculpture,
1, the background copy layer, use Pen tool to pull out the first part of the eye, Ctrl + Enter, the path to transform into a constituency with a straw, draw around the color white of the eye, the eyes fill,
2, the new layer, using the pen tool in the copy of the layer contour to the people characterized, and the border path switch, press Ctrl + C, Ctrl + V to paste the new layer
3, select the generic Stamp tool, the brim of the forehead hair slightly modified, after the achievement of a copy of the layer, and rotate into a Smart Object layer.
4, Filter - Stylize - Emboss, angle 135 °, height 3, number 142, Filter - Noise - the middle value, the radius of 2. Change the layer blending mode [overlay].
5, add a black and white adjustment layer, and load line of the path equitable described, by Ctrl + Shift + I reverse and fill the black, so that part of the screen, only to become a black and white portrait images.
6, select the Clone Stamp tool, eyes and ears will be slightly modified.
7, with the pen tool, hair and eyebrows were selected attach, then cut to the color layer on the layer. Ctrl + C, Ctrl + V, and a copy of the other layers of the eyes closed.
8, cut to the Channels palette, copy the red channel, Filter - Blur - Surface Blur, radius 2, threshold 33%, after holding down the Ctrl key, point toward the red color version of the thumbnail look.
9, back to the Layers panel, foreground to white, the new layer, Alt + Del keys, ambition fill the selection white.
10, cut to just the copy of the hair, eyebrows and layers, the first for relief effect,Lacoste Trainers 2010, sub-black and white. Data reference value before the eyes, eyebrows and hair contrast with the great change, a little out of tune with the body, add a layer mask, to cover up unexpected places.
11, load line of the path previously described, according to Ctrl + Shift + I, reverse selection, draw around the color, use the eyedropper tool, slightly modified the original hair.
12, as some of the details of the parts, using brush and imitation stamp tool, the modified back and forth and you're done friends!


Photo Name: young people in dealing with a delicate skin,
1. Duplicate the background layer. Filter - Blur - Gaussian Blur, Radius 10.
2. set the layer blending mode to Double-click the layer label to open the right medley of options. In the advanced mongrel, annul advanced R and G channels,
3. The use of color balance the image of the curve, according to the picture to determine
4. A new layer, select the repair Brush (J), select level sampling. Of large freckles or blemishes, imitation removed.
5.ctrl + shift + alt + E, stamp all the layers, the skin part of the tick, you can choose their own way, I individually prefer the pen tool, yet you can also use the polygonal lasso tool to Note that to handle with the skin, so to remove the eyes, eyebrows, lips, noses. Anti-selection (ctrl + shift + i) Remove more or less the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass, a radius of 4, mixed mode to


Photo Name: tune out the brilliant color photos,
1. open the original image, Ctrl + U, Hue Saturation, Hue -79, Saturation 22, Lightness +17,
2.Ctrl + M, tone curves, the red channel, slightly heaved up some,
3. Create a new layer, set the foreground color to: # F9DA06, background color set to black, work to Filter> Render> Clouds, Ctrl + Alt + F to enhance look, layer blending mode to painting, brush size 6, Sharpness 0, the type of simple brush, add a layer mask, and some of the people some of the floor under with a black brush wipe out
5. Create a new layer fill color: # ADF871, layer mixed-mode to
6. Create a new layer, Ctrl + Shift + Alt + E back layer, Ctrl + Shift + U to color, layer blending mode to
7. Create a new layer, Ctrl + Alt + ~ to bring up high-light selection, fill color: # FBF4C4, layer blending mode to . Create a new layer, Ctrl + Shift + Alt + E back layer proper look at the details of the revision, the final sharpening what


Photo Name: Old tune a simple way,
1. open the original image, hue saturation: saturation -55
2. to be the red channel of the curve likened to the value and amplitude according to the picture, act the color contrast of green channel, blue channel reverse contrast,
3. hue saturation: saturation -35
4. Duplicate the layer, Filter - Other - High Pass, I use the value is 250, mixed mode to Multiply,
5 to be a gradient map adjustment layer, black - white,
6. Filter - Blur - Gaussian Blur, Radius 4, can increase the image of mystery, given mushroom to people,
7. the picture uncoordinated blue saturation -100, brightness -100,


Photo Name: black and white retro color,
1. Open image, duplicate the layer, use the Lasso tool (more detailed, clean) the hook out of the skin, (channels can also be), replicated the hook out of the skin,
2. Image - Adjustments - Optional color, neutral colors: -49, -5, +100,0
3. on the part of the tick, copy, image - adjustment - optional colors, neutral colors: +35, -37, +64, + 22
4. hook pants, copy, image - adjustment - optional colors, neutral colors: -29, -48, -31,0. Ctrl + L Levels adjustment pants sense of light, color scale: 0, 0.81,175
5, tick hair, clone, need not be very wash, the edges a little background color, can make hair even more integration, tick the background,
6. color, image - adjustment - optional colors, Neutral colors: -30, -47, +100,0.
7. Select the background layer, (not hair, no skin, no jeans that layer), press Q to enter quick mask, select the gradient tool, black to transparency, gradient from upper left to lower right pull, that have elected black range, and you can press Q to exit Quick Mask, Levels: 0,0.32,255
8. the same direction to the left light tune out, according to Ctrl + A, Ctrl + Shift + C, Ctrl + V, all the layers are copied to a layer, into the top, superimposed, the color more vivid,
9. details of some (whites , eyes, lips, slippers, identify) color, add in the final map lighting effects, feel the car drove up,


Photo Name: Classic video posters made,
1. open the original image, duplicate the layer,
2. a new blank layer, fill it with black, copy the following into the background,
3. a copy of the coating to adjust, select the lasso tool, the large half-length figures ring out, emergence 30, Ctrl + Shift + I Invert Selection, Delete remove,
4. create a new layer. Blending mode to So heavily black and white photos, this color is quite beauteous embellishment.
5.Ctrl + L tone good order, the image compression darker, 116,1,255
6. a new layer, add text, add each piece of text is best to create a new layer, so that more of the layout flexible,


Photo Name:
1. open the incipient picture, the highest compare of the blue outlet copy,
2. and beyond amplify the contrast with Levels, the intention is to just let the stone there are many levels
3. the adjustment of a good blue Copy to copy the layer inside the channel and you ambition to add color, I used the deep orange
4. to copy the red channel to the base map layers, using masks to remove the sky and stone, leaving only grass and to add color with the Gradient Map
5. open the material speedy ball, copy the red channel contrast to just the largest file
6. Select the layer blend mode to Overlay and adjust the situation and size, production it a light source, clear some extra matter (to resolve), then use the radial blur percolate to knob about radiation, allowed the formation of emitted light beam
7. to copy the base map of the channel inside the red channel to enhance the contrast, so grass high light revealed more clearly, and then select Paste to a layer of high optical parts inside, filled with white, the layer mode to overlay, then use the mask to remove the white part of the sky, leaving only part of the grass, the grass appears to be sunny light of the light sense
8. Select Layer 1 and then invert the mask, get the sky constituency, addition curves and hue / saturation adjustment layer and adjust their private favorites like color and purity
9 Finally add some posters factors, so counterfeit posters that look real, the use of color, I attempt to choose a stone and gold to the color of dirt, so the color has been echoed


between Photo Name: citing the interchange of motifs and creative main,
1. open the original image, create a curve adjustment layer, click the V to paste, to get the layer 2, mixed mode to Multiply,
3. open sky material, Ctrl + A Select All, Ctrl + C copy, Ctrl + V paste, Ctrl + T to free alter the appropriate size of the pull position , Blending Mode to Overlay, with a rubber or brush on the mountain and lake blue clouds obliterate
4.Ctrl + J copy the sky layer, Ctrl + T right , merged mode to Overlay and wipe the mountain and some overlap in the sky,
5. copy layer in the sky layer to enhance the texture of clouds in the sky,
6. stamp visible layer (Ctrl + Alt + Shift + E), Filter - Blur - Gaussian Blur. Radius of 15, mixed mode to Soft Light,
7, add the hue saturation adjustment layer, saturation -35, so the picture is more moderate,
8. Add channel mixer adjustment layer, the red channel +100,60 , -8, green channel 30. +100, if the intensity high, the starting of the curve can be used to adjust the brightness level down, you can change the channel mixer adjustment layer's blend mode br>

Photo Name: sea beach,
1. open the original image, the new layer (Ctrl + Shift + Alt + N), then stamp the visible layers (Ctrl + Alt + Shift + E),
2. into the channel, copy contrast to relatively strong the green channel, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material defer in, the establishment of the mask, rub the figure
4. build layer, soft mode, make the sky look better,
5. to do the water reflection, Ctrl + T perpendicular flip, the establishment of the mask, with a brush to draw their desired effect , Multiply mode effect better, because figure varies,
6. color, adjust according to personal habits, good with the optional color,
7.Shift + Ctrl + Alt + E, stamp shown in Figure layer, layer mode Multiply, and then mask the darker corners of oppression, mainly for the water pressure dark, so the screen more balanced,
8. Filter - Noise - Add Noise, number 3, Gaussian distribution, color, make the temperaments and the same grainy sky,
9, the final fill the sky material


Photo Name: PS in turn hand-drawn pictures,
1. open the original file, according to their own feelings through color adjustment to adjust the film, and then resurfacing, dermabrasion amount not too much, (Neat image plugin)
2. a new layer, color FEE7D6, (according to the film character's skin color to set ), the layer mode to Overlay and 25%, 20% with a brush the skin on the face and cervix light coating,
3. traits of the detailed work, mowing out the jaws, the emergence copy (Ctrl + J), with Smudge tool to tarnish on the lips, the lips skin becomes soft and slight (not also much strength)
4. Create a new layer to the lips and face color, color FDC1D6, the layer mode to color, with a brush in the side of the lips and face painting,
5. with the Dodge tool, the range namely the tall light exposure of 25% to draw the lip of the tall light, with the Burn tool, the middle range, exposure 20% improve lips contrast,
6. a new layer, color 8E1A25, brush pixel is 3, draw the inside of the inside, then draw 2 pixels outside the lip lines (some lines to build high-light mask Dodge some)
7. circle the emergence of the neb, copy, use the smudge tool around the gentle nicety of the nose, then use the Dodge tool range is a high light exposure of 20%, to strengthen the high-light the next part of the nose, then color 422B2D, 2 pixel brush to draw the nose outline (lines light up with a better tool whether to make up for the afterward)
8. eclosion circle replication of the eye brows with the smudge tool on the soft skin around the eyes, thinning eyebrows, and then use the Dodge tool range is a high light exposure of 15%, to strengthen the high light under the eyes, with better tools the middle range, to deepen the lines around the eyes,
9. with the smudge tool to smear some of the detailed eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure least 20% of high light to enhance eyes and make the eyes see brighter,
10. color 080101, 3-pixel brush, draw eyelashes part (the line Dodge tools to deepen the color depth can be accustom to make up) eyelash line can too be used paths and some other means tick,
11. with the stain tool to apply the prettier eyebrow, brow a little rowdy spots slightly darker color, apply reduced down forward the back, then 2 pixels with a brush in front to draw eyebrows eyebrows lines, so eyebrows extra structured,
12. Smudge tool to choose the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the hair texture, not too much compel, to be applied uniform,
13. hair brush coated with a natural portion to convergence, (hair must be applied carefully)
14. draw the hair texture, the new layer, layer mode to Overlay, choose a pencil to 1 pixel, (picture size to the value insistent according to figures), along the hair color is DFDFDF draw smooth texture lines
15. horsetail some choose the brush tool, brush easily with a fork along the texture of some of the painting, the color layer model above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% flow, the color is white, draw dynamic forehead hair,
17. clothing and pendants with the smudge tool applied in some softer, and then choose to use the Dodge tool, the range is the high light , exposure 20%, clothing and necklaces to enhance the high light
18. synthesis of the whole image sharpening, sharpening value is 8, with the Dodge tool to highlight some of the little processing, the overall color improvement, the ( can be modified to add some background light, highlighting the theme)


Photo Name: post-look Raiders,
1. open the file, copy a layer copy of the
2. Select the duplicate layer of free transform to change the shortcut key ctrl + t to make the characters more slender face shape
3. at Merge Layers (ctrl + e), the use of cutting tools to upload images from a new essay, cut off the surplus part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80, white -0,0,Womens Lacoste Shua Trainers,0, -50. halftones -0, -5, -5, -5
5. according to curve (ctrl + m) adjust overall color, RGB full-channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjustments - Color Balance (ctrl + b), the shadow -10,0, +15. High light - 10,0, +2.
7. Around the mouth with a stamp tool to cover the skin evenly,
8. With a pen to surround dark bags below the eyes and face, the emergence 60, curves to brighten the constituency Dodge dilute bags under the eyes and facial muscles are not relaxed statement,
9. persisted emergence constituency 60, curve brighter, so that the face full, the output 146, input 113.
10. circle to highlight some of out, feathering 60
11. curve brighter, so namely the face full, the output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin with a lasso tool, the emergence 5, copy a layer, the Duplicate the layer and push down in order to accomplish eyebrow shaping effect, stamp eyebrows, this must be very thoughtful
13. began to adjust your eyes, choose the part of the eye ring out, copy the layer
14. pen circle to do eye shadow district, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part, Hue Saturation: 0,Mens Lacoste, -40,0
17. Circle the details of the upper eyelid eyelash basis Department, under the eye ahead eyelid 1 / 3, press the DELETE key to delete the selection, the exposed high-light position,
18. remove the extra part of eye shadow, plume 40
19. circle detail on the inside corner to the eyelid 1 / 2, press the DELETE key to delete the selection, so that exposed Highlight
20. circle the eyes out, copy the layer, emergence 1, part of desaturation whites, piebald back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes bright tone reproduction curve after layer, brush pen on the back half of the left eye, showing some shadows,Lacoste Zepher MR2 Trainers,
23. remove the pupil part
24. with a curve to adjust eye color, so that the same
25. and eyes high light
26. circle the lips, emergence 2, high-gloss lips curve adjustments to adjust the lips color
27. adjust the nose Liang Gaoguang, adjust shadow highlight
28. with optional color palette for a whole, the medium color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens fan, light 182,35 mm focus,
31. plus, where appropriate, final flash brush complete


Photo Name: ink effect to your photos,
1. Duplicate the layer and adjust - to color,
2. curve adjustment, increase the chiaroscuro, the input 114, output 186
3. Duplicate the layer, Filter - Brush Strokes - ink outline the stroke length of 5, 10 look-strength, light intensity of 10, falling into a soft light layer mode, adjust the opacity,
4. Filter - Gaussian Blur, Radius 2.0 pixels,
5. Filter - Brush Strokes - spray, spray radius of a color, smoothness, 3,
6. add the light brown solid layer, Figure Cen Enchanters of color, adjust opacity, not transparency, some as small as feasible,
7 points out of a solid color layer and the layer in front of the eye to hide it, the new layer with the brush in the lanterns, trees, tiles, etc. with the appropriate color layer,
8. to restore a invisible layer, change the layer mode to overlay, to see the effect to tune the details,
9. the overall effect on the screen to nice tune, until satisfactory results, no characteristic steps alter


photo Name: oil painting effects,
1 First he took a shot a good picture.
2 with mask mask part of the sky.
3 Add the sky section, and placed in the base of the screen can be adjusted.
4 new layer to the third layer, mainly to adjust the picture tone.
5 changes on claim is not transparent, change the layer properties to Soft Light.
6 In array to ascertain fuel in the texture efficacy, in color and then add a floor upon the layer of matter improve
7 layer properties to Soft Light, opacity changes on demand. This opacity is 86%
8 join mask, according apt the need as applicable trade-off shade content.
9 in order to reinforce a sense of texture, then create a new layer, filled with gray.
10 In the Add Noise filter to Gaussian and check the color, the number of custom.
11 layer to Soft Light.
12 according to the screen needs to be accommodated with the appropriate mask.
13 Noise, Add Noise - number 400, Gaussian distribution,


Photo Name: commercials of color and design,
1. Duplicate Layer, New Adjustment Layer-channel mix, gray channel, red +64%, Green 2%, 10% blue, monochrome
2. New solid mixed layer, select 575 046 colors, blend mode to Color,
3. New Curves Adjustment Layer, ① - input 68, output 32, ② - input 114, output 68, ③ - input 208, output 197,
4. create 1 solid layer, select 443B25 color, blend mode to color, press Alt-click mask,
5.Ctrl + D to restore the default background color, Ctrl + Delete to fill the black mask the background color,
6 to change the picture in high light and dark parts of the color transition to enrich the color, use a brush inserted in the mask
need some color, 300 pixels, opacity 10%, flow 100%
7 fonts preparation and devise
8. In order to make figures and screen colors have echoed to the character's point of lip gloss on the lips, create a new layer, select the Linear Dodge blending modes, add 90753D color, choose the brush on lip gloss, abrasive point pen, pixel 39,
9. enlarge the lip gloss reflective parts of the draw, observe, constant adjustment, the overall picture look good after lip gloss, this time the screen has a echoed, color become rich, not overwhelming, just bring out a product,
10. If the production directly with the body in the prototype, and human tune in to desire after, alternatively with the mask color to the product directly to the plug out of the product tin.


Photo Name: Wizard of supernatural effects,
1. Open the image, duplicate the layer,
2. simple dermabrasion, choice - color range, with a straw point their skin color, the color tolerance of about 103, Ctrl + J to obtain a new layer, Ctrl Click to choose, add a mask with a brush (the foreground color to black), remove the hair around with some,
3. Filter - Blur - Gaussian blur, pixel 1.7, reducing the opacity of the layer, to achieve natural dermabrasion effect,
4. alternatives - color range, with a straw draw hair color, the middle of straw + increased with the selection, the new curves adjustment layer to increase the contrast, according to the picture properly adjusted,
5. Mouse Left-point curve 1 mask, there constituencies, the new Levels adjustment layer Levels: 16,1.11,214
6. New Hue Saturation adjustment layer, red: -54, Yellow: -100
7. create a new group, to combine all of the above adjustment layer to facilitate the achieving trim,
8. New Group, for the hair color decoration, the new layer with a brush (white), hardness 0, Fig. properties of soft layer model,
9. Create a new layer with the pen tool nail lines (Pearl path), dictatorial lines, shipshape point, straighten hair, make hair muddle in the orderly,
10. with brush tool , F5 shortcut opener to bring up the brush settings dialog carton, 13 pixels, hardness 100%, 105% pitch, dynamic fashion, flat, the angle 0, roundness 100%,
11. switch to the route plate, elect the point of the right triangle described side of the route, to resolve,
12. Double-click the path layer jewelry, set the layer mode, Projection: architecture - Multiply, black, 28% opacity, angle 120 °, distance 0, 0 extension, size 5 pixels, the quality - variegated 0 . Bevel and Emboss: building - embossed, smooth way, the depth of 120%, instruction, shadow - angle 120 °, Multiply mode, white, opacity 33%, shadow mode Multiply, blue, opacity 36 %.
13. shape with rubber trim tool, add a mask, opacity 32%, coated beads, the beads and the hair below the tangible position with,
14. Create a new layer, sorted in different sizes with snow brush screen, adjust the snow layer styles, Projection: structure - Multiply, black, angle 120 °, Use Global Light, from 7 to expand 5%, size 1. Within the projection: Multiply, black, 12% opacity, angle 120 °, distance 7, blocking 10%. Outer Glow: structure - color filter, opacity 73%, lake blue pixels - soft approach, the size of 5 pixels, the quality - 50% range. Bevel and Emboss: structure - Outer Bevel styles, methods, smooth, 281% depth, direction, shadow - angle 120 °, Use Global Light, height 30 °, high light pattern color filter, 75% opacity, shadow mode Multiply, black, opacity 75%
15. New soft coating, copy the background layer, selection foreground color (blue lake), R = 133, G = 244, B = 244
16. Create a current layer, brush cilia scope,
17. New color layers, foreground - # 6fc8c8, R = 111, G = 200, B = 200,
18. new color layer, brush hair and beads on top of sleet, accessible eraser, set cheap opacity, transition. Hair coloring range of regional, multi-layers can be more natural.
19. fraught brush Star decoration interface,
20. blue soft brush to the whole layer of skin, plus cold tone and unity of the screen. New neutral group of skin color, the new skin and soft layers, line brush hardness to 0, the foreground color to blue lake. To the faces, light and black being of high distinction, used in blue and pink. Multi-layers of paint on the natural transition.


Photo Name: PS to the landscape watercolor effects,
1. a picture with the white side of the picture landscape maneuver, as do the edges with a white border spillover effects
2. hue saturation: saturation +80, adjust the impressionist effect,
3. editor - Define Pattern.
4. to create a white fill layer, 50% opacity, to build a transparent layer
5. pattern stamp tool, brush the cardinal diameter of 200, comes with the brush rainy media brushes 45 co-optation, mode normal, opacity 100% , Impressionist in front of check,
6. in a transparent layer pattern stamp painting, great long-term time King strokes,Womens Lacoste Observe Trainers, though the small details of the multi-stroke, adjusting the opacity of the layer above to outlook strokes,
7. Copy Background layer to the color filter - splash, 71% opacity, layer mode to Overlay
8. Filter - Texture - textured, opacity 100%,
9. filter - distort - scatter light 37%


Photo name: a magical picture effect,
1. sketched with a pen in the back of a wing shape,
2. in the new working directory into the path 1, double-click the work path.
3. the path into a selection (Alt + Enter), copy the layer, Feather 3 pixels,
4. filled with white, select the appropriate intensity of use of the smudge tool, the appropriate edge of the painting.
5. Duplicate the layer and fill alter colors, combined with distinctions between layers 1 can regulate the transparency of the Oh layer properties,
6. in accordance with the previous method of production of the second wing, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. Create a new layer draw a circular selection, using the brush circle in the constituency, adjust the appropriate degree of transparency,
8. Duplicate the background layer paste into the new Alpha channel, in appending to other areas outdoor the altitude left corner filled with black, using Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. select Alpha channel (the channel on prop Ctrl), in Fig. layer area a new layer, fill light yellow,
10. with a pen to generate the beam path, the path into a selection, yellow and white gradient fill color,
11. amenable transparency, light rub with the eraser by the bottom, is light becomes natural,
12. people who limn with a pen in the light path, the path into a selection, the edges of strokes with a painting, adjusting transparency, combined with the eraser and smudge tool will achieve better results and spend Several halo effect will be better


Photo Name: make a rumpled old photograph was,
1. to find a fold of the background, will need to generate photo haul the background layer, resize and harvesting, frame and background to the match,
2. corrections - hue saturation, the whole map: saturation -35 degrees, sunshine +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation, the whole map: 0, -80,0
5 Duplicate the layer, hue saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increase in the age sense, the number of 25%, Gaussian,
8. Blending Mode to Multiply,
9. Image - Adjustments - RP,
10. to remove the border of variegated, Select the rectangle tool to select the inside edge of the border, DEL key to delete the silhouette part of the variegated,
11. clashes with the eraser tool around the variegated character


Photo Name: Fun color - color thinks,
1. Duplicate the layer and into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool, the characters and filled with white flowers,
3.Ctrl + press on the red copy to make it into a constituency, remove red copy, return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers Cutout complete,
5. method I: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation coloring, New Hue Saturation adjustment layer, color playing in front of hook, Hue = 345, Saturation = 60, Lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: the new color balance layer, the middle tone - Levels: +100 , -54, -20 / +100, -35, +43
shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21, -23, - 5. Magenta: -100, -45, +32, -1
8. gradient maps use the new Gradient Map 1, layer to color


Photo Name: Ps-painting effect,
1. Create a new layer, brush with history, a long lax brush 20,
2. the whole first sweep again, just painted,
3. 7 of the brush to draw with the edge and elaborate, and then 1 brush to draw facial features and clothes items,
4. taut mouth painting manner changed the face details
5. with the blur tool to draw facial details
6. copy layers, filter - Artistic Effects - Painting painting, brush size 5, sharpness 15, brush types - simple
7. Filter - Texture - textured, texture - canvas, zoom 84 percentage, highlighting 5, light upper right


Photo Name: crack - Football Baby tutorial,
1. open the original image, duplicate the layer, fill pure black, overlay mode.
2. New Hue Saturation layer: saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15,Lacoste Camden Trainers, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, gloss 0, the material 69, 0 exposure, the surroundings 8,
6. stamp, plus text-decoration