| Back to logs list
3200603 2009 年 06 月 23 日 20:25 Reading (loading. ..) Comments (0) Category: Computer System
◆ network of the most classic DOS command Daquan ◆ 4
network of the most classic DOS commands! (Xvi)
not far away from the victory target. First, Open Notepad, enter the following:
int ip
set address name =
and then saved as a file named 7.sh
last then write a batch file in Notepad named The file to create a shortcut on the desktop, double-click the shortcut that you can achieve the rapid changes in IP address. If you want to quickly 192.168.0.5,192.168.0.7 IP address and other similar screen to switch between segments, then just change the The IP address, gateway information with the need to change, that is, a line in the script file of information about the gateway:
int ip
set address name = br> Similarly, the above is saved as a script file, and then try running the batch file made with ipconfig / all command to test it, found the information including the gateway, including changes also came. This is not a fast and convenient, IP address to change to change?
Use netstat shows connection statistics can be used
netstat command to display protocol statistics and current TCP / IP connection. netstat-a command displays all connections, and netstat-r display routing tables and active connections. netstat-e command displays Ethernet statistics, and netstat-s shows statistics for each protocol. If you use the netstat-n, the address and port number can not be converted into names.
Tracert (Trace Route) is a route-tracing utility used to determine the IP datagram access to the target path taken. Tracert command with the IP Time to Live (TTL) field and ICMP error messages to determine the network from one host to another host on the route.
-d specifies the IP address does not resolve the host name.
-h maximum_hops to specify the number of hops to trace the route known as the host target_name.
-j host-list Specifies the Tracert utility packets used by the router in the path list of interfaces.
-w timeout Wait timeout for each reply to the specified number of milliseconds.
target_name target host name or IP address.
pathping command is a route tracing tool that will ping and tracert command functions and the two tools do not provide the other information together. pathping command for some time to send packets to reach the ultimate goal of each router on the path, then the results of packet-based computer returns from each hop. As command to display the data packets at any given router or link on the extent of loss, so you can easily identify network problems may cause a router or link.
-n Hostnames do not resolve addresses to host names.
-h Maximum hops maximum number of hops the search target.
-g Host-list list of free source route along the route.
-p Period in the number of milliseconds to wait between ping.
-q Num_queries number of queries per hop.
-w Time-out waiting for each response by the number of milliseconds.
-T Layer 2 tag to mark the Layer 2 priority (for example, for IEEE 802.1p) to connect to data packets and sends it to the path to each network device. This helps to identify the Layer 2 is not correctly configured priority network devices. -T switch is used to test the quality of service (QoS) connectivity.
-R RSVP test Che checks to determine whether each router in the path support the -R switch is used to test the quality of service (QoS) connectivity.
interaction at the command prompt command using the DHCP
open a command prompt.
type netsh.
in the netsh> (Netshell) command prompt, type
in the dhcp> (DHCP assisted program) command prompt, you want to manage the server for the type server servername or server ip_address.
Once you have the right to manage the server has successfully connected, you will see Any support Netshell command. Type /? Or help to display the DHCP directly or as sub-menu option displays the command, type list lists used in conjunction with DHCP for all Netshell sub-commands.
route command
routing ip add / delete / set / show interface on the specified interface to add, delete, or display the conventional IP routing configuration settings.
routing ip add / delete / set / show filter on the specified interface to add, delete, configure or display IP packet filters.
routing ip add / delete / show boundary on the specified interface to add, delete, or display the multicast boundary setting.
routing ip add / set ipiptunnel add or configure the IP of the IP interface.
routing ip add / delete / set / show rtmroute add, configure or display the routing table does not continue routing manager.
routing ip add / delete / set / show persistentroute add, delete, configure, or display continuous route.
routing ip add / delete / set / show preferenceforprotocol add, delete, configure, or display the priority of routing protocols.
routing ip add / delete / set / show scope to add, delete, or show multicast scope.
routing ip set / show loglevel configuration or display the global IP record levels.
routing ip show helper shows all IP Netsh utility sub-environment.
routing ip show protocol shows all running IP routing protocols.
routing ip show mfe display multicast forwarding entries.
routing ip show mfestats statistics show multicast forwarding entries.
routing ip show boundarystats display IP multicast boundaries.
routing ip show rtmdestinations display the routing table manager goal of the routing table.
routing ip show rtmroutes display the routing table manager routes in the routing table.
routing ip nat set / show global configuration or display the global network address translation (NAT) settings.
routing ip nat add / delete / set / show interface to add, delete, configure or display the specified interface NAT settings.
routing ip nat add / delete addressrange public address in the NAT interface, add or delete an address pool range.
routing ip nat add / delete addressmapping add or remove NAT address mapping.
routing ip nat add / delete portmapping add or remove NAT port mapping.
routing ip autodhcp set / show global DHCP allocator configuration or display the global parameters.
routing ip autodhcp set / show interface configuration or show the DHCP allocator to set the specified interface.
routing ip autodhcp add / delete exclusion range in DHCP allocator address to add or remove an exclusion range.
routing ip dnsproxy set / show global configuration or display the global DNS proxy parameters.
routing ip dnsproxy set / show interface to configure or display DNS proxy parameters specified interface.
routing ip igmp set / show global IGMP configuration or display the global settings.
routing ip igmp add / delete / set / show interface on the specified interface to add, delete, configure or display IGMP.
routing ip igmp add / delete staticgroup interface to add or delete the specified static multicast group.
routing ip igmp show grouptable display IGMP hosts group table.
routing ip igmp show ifstats show IGMP statistics for each interface.
routing ip igmp show iftable display IGMP host groups for each interface.
routing ip igmp show proxygrouptable display IGMP proxy IGMP interface group table.
routing ip igmp show rasgrouptable display the remote access server's Internet interface used by the group table.
routing ip ospf set / show global OSPF configuration or display the global settings.
routing ip ospf add / delete / set / show interface on the specified interface to add, delete, configure or display OSPF.
routing ip ospf add / delete / set / show area to add, delete, configure, or display OSPF area.
routing ip ospf add / delete / show range in the specified OSPF area to add, delete, configure or display range.
routing ip ospf add / delete / set / show virtif add, delete, configure, or display the OSPF virtual interface.
routing ip ospf add / delete / show neighbor add, delete, configure, or display OSPF neighbor.
routing ip ospf add / delete / show protofilter add, delete, configure, or display the OSPF external routes of the routing information source.
routing ip ospf add / delete / show routefilter add, delete, configure, or display the routing OSPF external route selection.
routing ip ospf show areastats display OSPF area statistics.
routing ip ospf show lsdb Display OSPF link state database.
routing ip ospf show virtifstats display OSPF virtual link statistics.
routing ip relay set global configuration
routing ip relay add / delete / set interface on the specified interface to add, delete, or configure the
routing ip relay add / delete dhcpserver DHCP server address list in the Add or Remove DHCP server IP address.
routing ip relay show ifbinding display interface IP address binding.
routing ip relay show ifconfig displays each interface's
routing ip relay show ifstats shows statistics for each interface is DHCP.
routing ip rip set / show global IP-RIP configuration global settings.
routing ip rip add / delete / set / show interface at the specified IP interface to add or configure the RIP settings.
routing ip rip add / delete peerfilter add or remove RIP peer filters.
routing ip rip add / delete acceptfilter receiving the routing list to add or remove RIP routing filters.
routing ip rip add / delete announcefilter in the published list, add or remove routing RIP route filter.
routing ip rip add / delete / show neighbor add or remove RIP neighbors.
routing ip rip set / show flags in the specified interface to configure IP RIP advanced settings.
routing ip rip show globalstats display global RIP parameters.
routing ip rip show ifbinding display interface IP address binding.
routing ip rip show ifstats display RIP statistics for each interface.
IPX netsh routing commands
routing ipx add / set staticroute in the IPX routing table to add or configure a static IPX route.
routing ipx add / set staticservice table in the SAP services to add or configure a static SAP services.
routing ipx add / set filter on the specified interface to add or configure the IPX packet filters.
routing ipx add / set interface to enable demand-dial interface in the IPX routing, or configured on the interface in the specified IPX settings.
routing ipx set global configuration global IPX routing settings.
routing ipx rip add / set filter to add and configure RIP route filter.
routing ipx rip set global configuration global IPX's RIP settings.
routing ipx rip set interface configuration in the specified IPX's RIP interface settings.
routing ipx sap add / set filter to add or configure the SAP service filters.
routing ipx sap set global configuration of SAP global IPX settings.
routing ipx sap set interface configuration in the specified IPX's SAP interface settings.
routing ipx netbios add nbname static NETBIOS name to the IPX NetBIOS name table.
routing ipx netbios set interface configured on the specified interface, the IPX-based NetBIOS settings.
WINS NetSh
list command lists all available WINS command.
dump the WINS server is configured to dump to the command output.
add name registered on the server name. For more information, please enter add name /?
Add partner to add to the server replication partners. For more information, please enter the add partner /?
Add pngserver add the current server's Persona Non Grata servers list. For more information, please enter the add pngserver /?
Check database check database consistency. For more information, please enter the check database /?
Check name check a WINS server, the name of the record list. For more information, please enter the check name /?
Check version check the version number consistency. For more information, please enter the check version /?
Delete name deleted from the server database, the name has been registered. For more information, please enter the delete name /?
Delete partner removed from the list of replication partners replication partners. For more information, please enter the delete partner /?
Delete records deleted from the server or logical delete all records or a group of records. For more information, please enter the delete records /?
Delete owners remove the owner of the list of records. For more information, please enter the delete owners /?
Delete pngserver removed from the list all or selected Persona Non Grata servers. For more information, please enter the delete pngserver /?
Init backup backup WINS database. For more information,
louboutin shoes sale, please enter the init backup /?
Init import file to import data from Lmhosts. For more information, please enter the init import /?
Init pull start For more information, please enter the init pull /?
Init pullrange start another set of records of a WINS server, and read the record. For more information, please enter the init pullrange /?
Init push start For more information, please enter the init push /?
Init replicate replicated database with replication partners. For more information, please enter the init replicate /?
Init restore to restore the database from a file. For more information, please enter the init restore /?
Init scavenge remove the WINS server database. For more information, please enter the init scavenge /?
Init search search server WINS database. For more information, please enter the init search /?
Reset statistics reset the server statistics. For more information, please enter the reset statistics /?
Set autopartnerconfig set the server's automatic replication partner configuration information. For more information, please enter the set autopartnerconfig /?
Set backuppath set the server backup parameters. For more information, please enter the set backuppath /?
Set burstparam burst processing parameters set up the server. For more information, please enter the set autopartnerconfig /?
Set logparam set the database and event logging options. For more information, please enter the set logparam /?
Set migrateflag set the server migration logo. For more information, please enter the set migrateflag /?
Set namerecord set the server's interval and timeout values. For more information,
christian louboutin discount, please enter the set namerecord /?
Set periodicdbchecking set the server periodically checks the database parameters. For more information, please enter the set periodicdbchecking /?
Set pullpartnerconfig set a specific For more information, please enter the set pullpartnerconfig /?
Set pushpartnerconfig setting specifies the For more information, please enter the set pushpartnerconfig /?
Set pullparam set the default server For more information, please enter the set pullparam /?
Set pushparam set the default server For more information, please enter the set pushparam /?
Set replicateflag set the server's copy signs. For more information, please enter the set replicateflag /?
Set startversion set the beginning of the database version ID. For more information, please enter the set startversion /?
Show browser displays all active domain master browser [1Bh] records. For more information, enter the show browser /?
Show database shows the database and records the specified server. For more information, enter the show database /?
Show info display configuration information. For more information, enter the show info /?
Show name show the server details of a specific record. For more information, enter the show name /?
Show partner display the server's For more information,
louboutin shoes, enter the show partner /?
Show partnerproperties shows the default partner configuration. For more information, enter the show partnerproperties /?
Show pullpartnerconfig Show For more information, enter the show pullpartnerconfig /?
Show pushpartnerconfig show For more information, enter the show pushpartnerconfig /?
Show reccount display the specified number of records owned by the server. For more information, enter the show reccount /?
Show recbyversion show a record of the specified server. For more information,
cheap christian shoes, enter the show recbyversion /?
Show server displays the currently selected server. For more information,
christian louboutin shoes, enter the show server /?
Show statistics show WINS server statistics. For more information, enter the show statistics /?
Show version displays the current version of the WINS server counter values. For more information, enter the show version /?
Show versionmap owner ID to show For more information, enter the show versionmap /?
Interface command
interface set / show interface enable, disable, connect,
christian louboutin heels, disconnect and display the configuration of demand-dial interface.
interface set / show credentials in the demand-dial interface configuration or display the user name, password and domain name.
lubo ,2004-07-02 13:38:58
Linear Mode
