8.7jaw

About Jaw Crusher For Sale
Jaw crusher optimization, in a very long period of time, the designer of the body size, Jaw crusher for sale. the choice of crank radius with a certain blindness, and most of the same model with reference to the foreign analog determined. Or the amount of compression required to be, blind to trial and error to be changed, so that the machine can not guarantee the best transmission performance, to optimize the design of the crank radius, can ensure the realization of process requirements under the premise of the body size parameters of the best, Of course, because of mathematical modeling is not the same, the resulting objective function has many, such as the crank radius, moving Dayton nesting population at the characteristic value and a broken loop volume of material such as discharge, B is to make the best results while broken maximum production capacity. As the model optimization method, the selected variables, constraints are also a variety of different algorithms.
The shape and size of crushing chamber should meet the following requirements; First, to prevent overloading the machine and plug in the unit of time the material into the crushing chamber and the discharge should not be more than the material can be broken; second, loading the machine in order to ensure uniform, smooth, broken plate wear uniform, the material should be evenly distributed in the crushing cavity; the third, for the factory to improve the efficiency of crushing, grinding to prevent clogging and over-the phenomenon of broken material should be able to flow from the crushing cavity discharge; fourth In order to ensure the product fineness and shape of the cube, crushing-type crusher, crushing the lower chamber should be parallel to the area.
The shape and size of crushing chamber should meet the following requirements; Stone crusher for sale. First, to prevent overloading the machine and plug in the unit of time the material into the crushing chamber and the discharge should not be more than the material can be broken; second, loading the machine in order to ensure uniform, smooth, broken plate wear uniform, the material should be evenly distributed in the crushing cavity; the third, for the factory to improve the efficiency of crushing, grinding to prevent clogging and over-the phenomenon of broken material should be able to flow from the crushing cavity discharge; fourth In order to ensure the product fineness and shape of the cube, crushing-type crusher, crushing the lower chamber should be parallel to the area.
With the crushing process mathematical model accurately describes the crushing process to become a reality in 1948, B. Epstin first used to study the statistical theory of materials broken the law, 1956 S. R. Broadent and T. G. Callcatt so put a small broken matrix model; 1977 A. J. nch further analysis of the grinding process of the matrix model. Coupled with the proliferation of computers, and establishing a jaw crusher model and the actual operation of the numerical calculation has become possible, for further simulation, optimized design provides the foundation.
In short, for now, our jaw crusher is designed in terms of quality and performance with foreign advanced level there is a large gap, compared to the same model, the weight of the machine is much smaller than China's, indicating The overall level design and manufacturing in China much higher than that. In addition, the machine bearing a small but long life; in wear-resistant materials, heat treatment also has a small arts and other Diao; small gap. Improve our manufacturing technology is the key to digestion and absorption of imported products, their research and development unit should pay attention to the design and development with independent intellectual property rights, Ore crusher For Sale.improve the quality of complementary products, including products, catch up with international advanced level.