As long for tread 7 , you tin reinstate the 6 face

First, crack Cube, we have to first understand its structure, 6-color 6-sided cube, each side is divided into the central stop (the middle of the stop 6), corners (4 corner blocks 8) and the side blocks (4 at the edge of the block 12). Of which only 1 side the central block,GHD Red Butterfly 2011, they are a nailed architecture, so central is the red block,GHD Classic Straighteners, then the red ought be the other side to this focus. And red is forever the center of the block opposite the central block of orange (worldwide criterion is so specified). The block has two side faces two colors, corners there are three faces three colors.

Next we have with each side characterized by the letter,

sina and then destroy to annotate in the letter ambition be used to rotate a wafer or a surface, and direction: for instance: R (on behalf of 90 degrees clockwise above the right), R `(above benefit of the right rotate 90 degrees counterclockwise), R2 (2 times on behalf of the right turn 90 degrees clockwise)
is shown below:

terminal memorandum is: the appoint of each side is relative,GHD MK4 Pure Straighteners, case in point, F namely the front, namely is, when holding a Rubik's cube for his side, whether we imitate the circulation to the other side,GHD Purple Butterfly 2011, then there is a new side of a front.

Well, let's attempt the next
the following 7 steps to restore the cube it!

1. first side of the middle of the block is white (with a piece of rubiks logo) facing the top, and then make a white cross at the top, that is, all other colors of the blocks to the fitting position (small complex, see picture, note the subject of the on formulas Oh, did correct)

2. Then the pearly corners homing (Cheats said,GHD Red Straighteners, very intricate and easier to understand, or plug-Rights)

3. Then let the middle edge pieces into area.
the white face turned to the afterward, find the red and green side of the block, if the red and green on the top side of the block according altitude clockwise until the edge of the block in Figure 1 on the same situation, in accordance with the formulas rotating cube,GHD Hair Straightener, so that side of the block into place. If the red and green side of the block in the middle of a layer, yet in the wrong place or color peccadillo, the first block on the right side of the red and green rank in front, and then re-spin in agreement with one of the following series 1.


4. Then the top (should be yellow) side of the block to adjust upward, making yellow cross. If the rotation in accordance with formulas 1, the top no a yellow cross, repeatable formulas by turning, until the yellow cross appears.

5. Then accommodated to cross the yellow around edges, a morsel tough to see formulas clue.

6. Usually this time yellow block, and the dislocation will have the color of the side, according to formulas (I have not fully digested) to situate the four corners of the yellow block.

7. Finally, the edge of the color and then adjust to the corresponding location. You're done! ! Thrill.