Basic However the Now do not be afraid, and I'll clarify for you detailed specifics for each illegal to get a specific which means.
1, Stop error number: 0x0000000A
Caption: IRQL-NOT-LESS-OR-EQUAL
the normal factors: the driver utilizes an incorrect memory address.
Solution: In case you can't login, then restart the pc. Once the list of on the market working technique, press the F8 key. Within the Windows State-of-the-art Selections Menu display screen, choose
examine for properly put in all the new hardware or software. If this is a new set up, get in touch with the hardware or software manufacturer may possibly be required to obtain any Windows updates or driver.
run by computer manufacturers to present all the technique diagnostics software, specifically the memory check.
Disable or Remove newly installed hardware (RAM, adapters, tough drives,
Office 2010 Professional Key, modems, etc.), drivers or software.
to make sure that the hardware system drivers and program BIOS will be the newest model.
guarantee that the producer can support whether or not you might have the most recent version, may also assist you to get the hardware.
Disable BIOS memory options for instance cache or a shadow.
two, Quit error code: 0x0000001E
Caption: KMODE-EXPTION-NOT-HANDLED
the normal reasons: kernel-mode process attempted to execute an illegal or unidentified processor instruction.
Remedy: Make certain there is certainly sufficient room, in particular inside the time to perform a brand new installation.
if a Stop error message that a specific driver, then disable him. In case you can not begin the laptop or computer. Must attempt to use secure mode to remove or disable the driver.
If you have non-Microsoft supported video clip driver, attempt switching towards the standard VGA driver or to supply the suitable Windows driver.
disable any newly set up drivers.
ensure that the newest model on the technique BIOS. Hardware producers can support decide whether you've got the most recent edition, you could also assist you to get him BIOS memory solutions which include cache, shadow.
3, Stop error quantity: 0x00000023 or 0x00000024
Caption: FAT-FILE-SYSTEM or MTFS-FILE-SYSTEM
typical cause: problems in Ntfs . sys (driver allows the method to read and create NTFS driver file) above.
remedy: Run by the laptop or computer program maker diagnostic software program, particularly hardware diagnostic software program.
disable or uninstall all anti-virus software, disk defragmenter, or backup system.
the command prompt,
Microsoft Office Pro Plus, run Chkdsk / f command to verify the tough drive is damaged, then restart your computer
4, stop number: 0x0000002E
captions : ATA-BUS-ERROR
the normal factors: the technique memory parity error, commonly caused by hardware issues.
Remedy: Remove any recently installed hardware (RAM. Adapters. Hard. Modem, and so forth.).
run by computer method manufacturers to offer diagnostic software program, particularly hardware diagnostic software program.
to guarantee that the hardware device drivers and method BIOS would be the most recent model.
hardware suppliers to provide system diagnostics, run the memory check to obtain fault or doesn't match the memory.
Disable BIOS memory options including cache or perhaps a shadow.
following the commence record might be utilised because the program,
Office 2010 Pro Key, press F8. In the Windows State-of-the-art Choices Menu screen, pick compatibility list.
5, stop number: 0x0000003F
Caption: NO-MOR-SYSTEM-PTES
the typical reasons: the driver is not correctly thoroughly clean up .
Remedy: Disable or uninstall all anti-virus software,
Office 2010 Standard Key, disk fragmentation or backup processing system.
six, Quit error amount: 0x00000058
captions : FTDISK-INTERN-ERROR
the usual factors: a fault-tolerant set within the major drive fails.
Answer: Use the Windows set up disk to start the computer, from your mirror (the first two) the program drive. about tips on how to edit the Boot.ini file to stage to the guidance system drive mirror, support expert services in the MIcrosoft Internet web-site search
Caption: INACCESSI-BLE-BOOT-DEVICE
widespread trigger: initialize I / O technique (commonly refers to the boot device or file method) failed.
Solution: boot sector viruses normally cause this Quit error. may be the newest model of anti-virus software, check your personal computer for viruses. Should you discover a virus, you have to implement the crucial through the laptop or computer does not get him supernatant removed, please refer towards the anti-virus software program documentation for methods to perform these steps.
remove all freshly set up hardware (RAM, adapters, modems, and so forth.).
check MIcrosoft Hardware Compatibility Listing to make sure that all hardware and drivers are suitable with Windows.
If you are working with appropriate SCSI adapter,
Windows 7 Ultimate Product Key, readily available from hardware distributors furthermore to the newest WINDOWS drivers, SCSI system to disable sync negotiation , check whether the end in the SCSI chain and matching gadget SCSI ID, if not certain methods to do to those actions, refer towards the documentation of hardware devices.
If you are using IDE devices, the board The IDE port is defined because the only significant port. examine the IDE devices master / slave / unique setting. Remove the hard drive furthermore to all IDE products outside. If you cannot identify how the implementation of these do not look for, refer to your hardware documentation.
When the laptop or computer is formatted employing the NTFS file program, you'll be able to restart the computer, and then run around the program partition Chkdsk / f / r command. If your method can't begin on account of an error, use the command console, and run Chkdsk / r command.
run Chkdsk / f command to determine no matter if the file program damage. If Windows cannot run Chkdsk command, the drive to another computer operating Windows, and then in the laptop or computer drive to run Chkdsk command. [page]
eight, Quit error number: 0x0000007F
Caption: UNEXPECTED-KERNEL-MODE-TRAP
the normal reasons: typically for the reason that the hardware or software program issue induced, but commonly brought on by hardware failure.
Answer: verify the Microsoft Hardware Compatibility List to make certain that all hardware and drivers are compatible with Windows. In the event the personal computer is not appropriate motherboards may have this issue.
Eliminate run by the newly put in hardware.
run by pc manufacturers to present diagnostic software program for all techniques, in particular the memory verify.
Disable BIOS memory possibilities like cache or possibly a shadow.
nine, Stop error number: 0x00000050
Caption: AGE-FAULT-IN-NONPAGED-AREA
the typical factors: memory errors (data not use paging file-swapping to disk).
Solution: Remove all of the newly installed hardware.
run by a laptop or computer producers to offer all the system diagnostics software. particularly the memory examine.
verify is appropriately put in any new hardware or software, if this is really a new set up, get in touch with the hardware or software manufacturer to acquire could be required for any Windows updates or driver.
disable or uninstall all anti-virus plan.
Disable BIOS memory choices which include cache or shadow
ten, the quit error code: 0x0000007
Caption: KERNEL-STEL-STACK-INPAGE-ERROR
the normal reasons: no kernel information through the paging file will study the required web page access to memory.
Answer: Use the most recent version of anti-virus software program, check your computer for viruses. If you get a virus, carry out the crucial actions to remove him in the laptop or computer supernatant. Make sure you refer towards the manufacturer to give diagnostic software for all programs, especially the memory examine.
Disable BIOS memory options such as cache, shadow.
11, Stop error number: 0x00000079
Description Text: MISMATCHED-HAL
the typical reasons: the hardware abstraction layer together with the kernel or machine kind mismatch (in most cases occurs in single-processor and multi-processor configuration files are mixed in the case for the very same program) .
Answer: To resolve this error, make use of the command console to switch the system files on a laptop or computer error.
single-processor program kernel files are Ntoskml.exe, and even more processor program kernel files are Ntkrnlmp.exe, then again, these files together with the files on the set up media correspond; Soon after installing Windows2000 and, no matter which use the original files is going to be renamed to Ntoskrnl.exe file. HAL file name is also utilized immediately after installation Hal.dll but installation media, installation media, but you will discover a number of achievable HAL files.
12, Stop error number: 0x0000007A
Caption: KERNEL-DATA-INPAGE-ERROR
the typical reasons: no kernel information from the paging file will read the required web page into memory. (usually due to failure for the paging file, virus, disk controller error, or brought on by the fault for the RAM).
Remedy: Make use of the most recent edition of antivirus software program to check whether or not there's a pc virus. If you ever locate a virus. then carry out the crucial actions to supernatant was removed from his laptop or computer, see the software program documentation to understand the way to fall ill degree of implementation of those actions.
Should the pc is formatted working with the NTFS file technique. can restart the personal computer, after which run around the method partition Chkdsk / f / r command. If your error cannot begin the command, then use the Command Console and run Chkdsk / r command.
run by computer producers to give all of the techniques inside a customer software, especially memory examine.
thirteen, Stop error quantity: 0xC000021A
Caption: STATUS-SYSTEM-PROCESS-TERMINATED
the usual reasons: user-mode subsystem, for example Winlogon or the Customer Server Runtime Subsystem (CSRSS) has been damaged, it could no lengthier assure security.
Answer: Remove any newly installed hardware.
If you can't landing, then restart your pc. When the checklist of accessible running system, press F8. In the Windows 2000 State-of-the-art Alternatives Menu screen, choose: run recovery models, and permit the technique to repair any detected errors.
14, Stop error quantity: 0xC0000221
Caption: STATUS-IMAGE-CHECKISU7M-MISMATCH
the normal factors: the driver or technique DLL has long been corrupted.
Remedy: run the fault recovery console, and allow the program to restore any detected mistakes.
If extra to the pc in RAM immediately immediately after the error happens, then the paging file might be broken, or through the failure or even the new RAM isn't suitable. Pagefile.sys and return the program to eliminate the initial RAM configuration.
Office 2010 Standard Key Detailed Windows system,
Linear Mode
