We have to memorize namely 20 category of PS techn

! ! The United States will not do your photos ! ! !


Photo name: bring up photos soft blue and yellow - a simple direction,
1, open the original material, press Ctrl + J to copy the background layer a layer, point channel panel, select the blue channel, image> apply image, layer as the background, mixed to Multiply, opacity 50%, RP tick,
2, Back to the Layers panel, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black blend mode to Multiply and Opacity to 60%, choose the Elliptical Marquee Tool middle selection, press Ctrl + Alt + D Feather, a amount of 70, and then double-click the Delete key to delete, resort to the text, complete the final effect.


Photo name: bring up photos pretty red and yellow,
1, open the original material, Ctrl + J to copy the background layer a layer, press Ctrl + Shift + U to color, run: Filter Mirror> Fuzzy> Gaussian Blur, number 4, for the color filter layer blending modes, layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E stamp layers, layer blending mode to color. 3, create a gradient map adjustment layer, purple - orange, Alt + Ctrl + G with clipping mask.
4, create the brightness / contrast correction layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 , create a Levels adjustment layer, 8,1.00,255
7, the color adjustment layer to create one optional, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, white: -5,0,0,0,


Photo name: bring up nostalgic landscape photos,
1, open the incipient duplicate layer
2, curve adjustment, numerical RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color equilibrium , values: 0,0, -34
5, optional colors, independent colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56 %,
7, the clouds pull material into the graph, into the original top, soft light layer mode, the outside part of the sky in appending to wiping out, back layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, excluding layer mode, copy a layer, filling 52%
10, curve adjusted value of RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, gradation, value: 29,1.00,227, filling 58%
13, optional colors, neutral colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, Sharpen photos about


Name: youth folk handle with the delicate skin out,
1. Duplicate the background layer. Filter - Blur - Gaussian blur radius to 10.
2. set the layer blending mode to Double-click the layer appoint to open the right mixture of options. In the Advanced Mixed, obliterate perfected R and G channels,
3. Use of the color balance of the image curve, according to the picture to decide
4. Create a new layer, select the repair Brush (J), select layer specimen. Freckles or blemishes on the colossal, sham removed.
5.ctrl + shift + alt + E, stamp all layers, tick the skin part, you can choose their own way, I rather the pen tool, yet you can also use the Polygonal Lasso tool, to Note that to deal with the skin, so to remove the eyes, eyebrows, lips, nostrils. Anti-selection (ctrl + shift + i) delete the addition to the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass radius of 4, mixed mode to >

Photo Name:
1. Open the original image, copy the biggest contrast of the blue channel,
2. and then use Levels to further increase the contrast, the purpose is to equitable let the stone have layers
3. to adjust the pleasing blue Copy to copy the layer inside the channel and to add the color you ambition, I used the deep orange
4. to copy the red channel to the bottom map layers, using disguises to clear the sky and stone, leaving merely the grass and to join color with the Gradient Map
5. Open the material lightning ball, copy the contrast of the red channel to have the largest file
6. Select the layer blend mode to Overlay and adjust the situation and size, production it a light source, remove some needless things (to determine), then use the radial mist filter to deal it radiation, granted the formation of the beam emitted
7. to copy the base map of the red channel inside the channel, enhancing the contrast, so that The high light some of the grass revealed more clearly, and then select the layer of high optical part of the paste inside, with white fill, layer mode to Overlay, and then use the mask to remove the white part of the sky, leaving only part of the grass, the grass appears to be glare of light
8. Select the mask layer 1 and then invert the selection, selection by the sky, addition curves and hue / saturation adjustment layer to adjust along to personal favorite and the purity of the color you like
9. Finally, add some posters factor, so that looks real counterfeit posters that in use of color, I try to choose the gold to the color of decorative and stones, so that colors vary between reverberate


Photo Name: sea shore,
1. Open the original, the new layer (Ctrl + Shift + Alt + N), and then stamp apparent layers (Ctrl + Alt + Shift + E),
2. into the channel, copy the relatively muscular compared the green channel, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material lag in, create masks, wiping the diagram
4. establish layer, soft light mode, to make the sky look better,
5. to do the water reflection, Ctrl + T vertical flip, create masks, with a brush to draw your lusted , Multiply mode effect better, because maneuvers vary,
6. color,Womens Lacoste Arin Trainers, adjust according to private habits, good use of the optional color,
7.Shift + Ctrl + Alt + E, stamp shown in Figure layer, layer mode Multiply, and then mask the darker corners of pressure, chiefly for the water pressure of the dark, make the picture more balanced,
8. Filter - Noise - Add Noise, number 3, Gaussian distribution, color, make the characters and the same grainy sky,
9, the final fill the sky material


Photo Name: PS effects in turn hand-painted photographs,
1. open the original documents, according to their own sense of color adjustment through the adjustment of the film, and then resurfacing, dermabrasion value not too many, (Neat image plug-in)
2. a new layer, color FEE7D6, (based on the color to set the movie characters ), the layer mode to Overlay and 25%, 20% with a brush in the face and nape skin and light coating,
3. features of the careful work, cutting out the mouth, the emergence Copy (Ctrl + J), with Apply tools to apply the lip, so that the skin becomes soft and smooth lips (not too much strength)
4. Create a new layer to the lips and face paint, the color is FDC1D6, layer mode to Color, lips and face with a brush in the side of the painting,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the high-light some of the lip, with the Burn tool, the range is the middle 20% of exposure, strengthen the lips contrast,
6. a new layer, color 8E1A25, 3 pixel brush to paint the inside lane, and then draw 2 pixels outside the lips lines (high-light mask Dodge built some lines more)
7. on the neb to circle the emergence, reproduction, use painting tools to be agreeable around the nose refined, and then use the Dodge tool range is a high light exposure of 20%, strengthening the high-light the afterward part of the nose, and then Color 422B2D, a 2 pixel brush to draw the outline of the nose (whether the short lines to make up for using better tools for the afterward)
8. eclosion circle replication of the eye brows, eye brows with the smudge tool nigh the soft rind thinning, and then use the Dodge tool range is a high light exposure of 15%, reinforcing the high-light parts under the eyes, with better tools the medium range and deepen the lines around the eyes,
9. coated tools used to apply some nice eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure 20% of the degree to strengthen the high-light part of the eyes, making eyes look brighter,
10. color 080,101, 3-pixel brush, draw the lashes part (line Dodge tools to deepen the color depth can be used to make up) can likewise be used eyelash line paths and other ways triggered,
11. with smudge tool to apply the prettier eyebrow, his brow slightly darker color of the rough spots that tarnish back along the disappear down, and then 2 pixels with a brush to draw eyebrows in the front eyebrow lines, the eyebrows more structured,
12. smudge tool to prefer the hair brush, (according to hair texture to set brush shape), applied the process to be applied according the texture of the hair, not too much compel to apply the uniform,
13. hair brush applied partial to the normal interface, the (hair must be applied cautiously)
14. Draw the hair texture to a new layer, layer mode to overlay, select the pencil pixels to 1 (the value determined according to the size of character images), color, hair texture for the DFDFDF draw down smooth lines
15. horsetail some select brush tool, brush softly with a fork some of the paint along the texture, color, pattern layer above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1,Lacoste Arin Patent Trainers, opacity 60%, 80% of stream, color is white, draw dynamic forehead hair,
17. clothes and necklaces with the smudge tool applied some of the softer, and then select the Dodge tool with a range of high light , exposure 20%, clothes and necklaces to enhance some of the high-light
18. Synthesis, sharpen the picture as a whole, sharpening is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)


Photo Name: post-makeup Raiders,
1. Open the document, copy a layer copy of the
2. Select the duplicate layer by free transform to change the shortcut keys ctrl + t to make the characters more slim face shape
3. by Merge Layers (ctrl + e), the use of cutting tools so that the screen contains the new makeup, slit off the more part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80. white -0,0,0, -50. intermediate colors -0, -5, -5, -5
5. by curve (ctrl + m) adjust overall color, RGB full channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjust - Color Balance (ctrl + b), the shadow -10,0, +15. Highlight - 10,0, +2.
7. With a stamp tool to evenly cover the skin around the mouth,
8. With a pen to circle dark bags under the eyes and face, the emergence of 60, the curve to lighten the constituency Dodge bags under the eyes and reduce the expression of facial muscles do not relax,
9. continued emergence of 60 constituencies, the curve lightening, the face, full point, output 146, input 113.
10. the high part of the circle of light out, pluming 60
11. curve of lightening, the face, full point, output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin, the lasso tool, the emergence 5, copy the layer, the Duplicate the layer move down, in order to accomplish eyebrow shaping effect, stamp eyebrow shaping, this must be quite thoughtful
13. began to adjust the eyes, the Commission put out the eye part of the circle, copy layer
14. pen to circle the do eye shadow region, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part of the Hue and Saturation: 0, -40,0
17. Circle the details of the root of the upper eyelid eyelashes Department before the corner of lower eyelid 1 / 3, press DELETE key to delete the selection, the exposed high light-bit,
18. delete some more eye shadow, feather 40
19. circle the details to the upper internal corner eyelid 1 / 2, press DELETE key to delete the selection, the exposed high light-bit
20. the eyes ring out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes after the curve adjustment layer of bright copy, pen brush back the first part of the left eye, showing some shadows, p>
23. remove the pupil part
24. with eyes the color curve adjustment, so that the same
25. plus look high light
26. circle the lips, emergence 2, Curves lips high light, adjust the lips Color
27. adjust the nose Liang Gaoguang, adjust shadow highlights
28. with the optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm focus,
31. Finally, insert a flash in the appropriate brush complete


1. sketched with a pen on the back of a wing shape,
2. in the new working catalogue into the path 1, double-click the work route.
3. the path into a selection (Alt + Enter), copy the layer, emergence 3 pixels,
4. filled with white, select the appropriate intensity of use of painting tools, apply the appropriate edge.
5. Duplicate the layer, fraught with another color namely tin be distinguished Layer 1, Layer Properties regulating transparency Oh,
6. in consensus with the usage of product of a second in front of the wings, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. new layer and draw a circular selection using the brush circle in the constituency, then adjust the transparency,
8. Copy glue into the new background layer The Alpha-channel, within additional places appearance the top left corner of the black filling, use the Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. Select Alpha channel (the channel holding down Ctrl), in Figure floor area new layer, fill light yellow,
10. with a pen generated beam path, the path into a selection, yellow and white gradient fill color,
11. adjust transparency, rub with the eraser at the bottom of the light is light becomes the normal,
12. People who sketched with a pen light in the path, the path into constituencies strokes with a painting in the edges, adjust transparency, combined with the eraser and smudge tool will achieve better results and cost more Several halo effect will be better -
-

1. to find a fold of the background, drag the photos will need to make the background layer, resize and harvest, border and background to make it mate,
2. Adjustment - Hue and Saturation, full size: saturated -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation, full size: 0, -80,0
5. Duplicate Layer, Hue and Saturation - color: 340,24,0
6. build a fashionable wafer on top, fill it with dark,
7. Filter - Noise - Add Noise, increase in the antique sense of the number of 25%, Gaussian delivery,
8. Mixed Mode to Multiply,
9. Image - Adjust - RP,
10. to remove the border of the mottled, Select the rectangle culling tool with the medial side of the siteline, DEL key to cancel the silhouette part of the variegated,
11. clashes with the eraser tool around the assorted characters -
-

1. Duplicate the layer, into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool to fill the white figures and flowers,
3.Ctrl + click on the red copy to make it into a constituency, remove red copy of the return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers matting completed,
5. Methods A: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation of coloring, the new hue saturation adjustment layer, colored to activity in front of nail, Hue = 345, Saturation = 60, lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: New color balance layer, the middle tone - Levels: +100 , -54, -20 / +100, -35, +43
Shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21, -23, -5. Magenta: -100, -45, +32, -1
8. gradient mapping application, new Gradient Map 1, the layer to Color -
-

1. Open the original image, duplicate the layer, filled with pure black, overlay mode.
2. New Hue and Saturation layers: Saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, lustrous 0, the substance 69, 0, exposure, context 8,
6. chop, add text elaboration -
-

1. Duplicate Layer, Filter - Blur - Radial Blur: number 71, blur method - zoom, quality - good,
2. create templates, struck a car, then smear given rise to dynamic wheel ,
3. Levels - optional colors. Add material, rendering the whole atmosphere, the details of adjustments made with the Dodge, the main diameter of 5, the hardness of the smallest -
-

1. in the RAW to adjust the brightness, contrast, etc., for arranging the basis after the adjustments,
2. to add the sky material, simple transparency, make the sky into the layer,
3. New Adjustment Layer optional colors - intermediate colors: +20, +6, +7, -4, absolute, a little water color uniform,
4. khaki color fill, opacity 54%, filled with dark blue color, opacity 61 %, fill deep mauve, opacity 76%,
5. fine-tuning, high light and adjust the selection in the middle of the resulting mask, high-light selection method: Calculation - Source 1: The layers merge layers, gray channel, the source 2: The layers merge layers, gray channel, Multiply mixed, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply mixed, opacity 100%.
7.RGB get inside the mask channel, with a curve adjustment, high light adjustment: the black carton on the left in the penultimate line of the middle line, blue line to the cut point, the middle intonation adjustment: Up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall provides bright,
9. boat debris reduced saturation, saturation: -36,
10. sharpening the overall -
-

1. Open the picture duplicate the layer, Ctrl + Alt + ~, by constituency, emergence 3-5. curve brightens, about 18,0
2. Adjust levels: 25,1,20,245. Mongolia edition of the main characters and the details given rise to some
3. stamp on the characters to brighten the edge of the sharpening modified dermabrasion.
4. on the back layer for color balance, the middle notes: -12, -10, -13. high light: +8,0, -19.
5. back layer, into the LAB mode,
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%,
7. the application of the image on the new layer, layer: merge layers, soft mode, transparency, 100%,
8. adjustment layer to adjust the curve on the lightness channel, 5,0
9. on the LAB color image saturation, hue adjustment, full size: 0, +10,0. Yellow: 0, +35,0. Green: 0, +15,0. Red: 0, -20,0. Blue: +10, +30,0.
10. into Levels: 20,1.20 , 245. on the lightness channel to adjust the gradient in the mask with a circular out at the chief characters, and then brush clashes details.
11. stamped, return RGB color, the image is optional color options, red channel: 0,0,0, -30 given rise to the petals on the mask,
12. stamp, the new blank layer, sprinkling with white brush to increase effects of pen pressure. 100% hardness, spacing, +54% -
-

1. Duplicate the layer, soft light mode, the use of soft layers is optimized for
2.Ctrl + U hue saturation adjustment, the color of straw draw leaves, change the hue of the season has reached the transformation , we need the feeling of winter to find the leaves of the hue, the brightness adjustment for the most light.
3. Note lightness tolerance under which the details of the slider, you can select constituencies reduced saturation, hue can also be used to improve transparency, here is the color range, closing duplicate the layer, with the background layer to color range.
4. constituencies and returned copy layer selected, emergence, for the selected part of the saturation of 0,
5. snow feeling of the figures in the anti-choice, you can use the color range, you can also use the hue saturation, and finally add contrast, wiping out some clothes.
6. some little rigid snow, superimposed on the snow to be ambiguous, with the contrast in the copy layer selected, change the overlay mode, copy the layer beabsent from contrast,
7. the overall rate of a contrast with perspective about clashes between a large brush, not including figures, giving details of the snow. -
-

1. Duplicate the layer, adjust brightness, contrast, down the merger,
2. into the LAB mode, select the image of the image, reckoned,
3. the layer mode to color, cover printed layers,
4. into the RGB channel, filled with black and blue channels to extract the green channel selection, will fill the selection with white,
5. Hue and Saturation, Red: +20, +1,0. cyan: -7, +26,0. other data does not move, the layer mode to color,
6. into the RGB channel, choose the green channel selection, anti-choice, color balance adjustment layer, select midtones , values: -10, -6, +16. Shadow: +4, +5, -2. high light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel constituency, copy, paste back to RGB mode, layer mode to color, select the adjustment layer curve, red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue Channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, the layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, middle notes: -6,0, +3. Shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2. High light: -19, -26, -40.
12. Plus lightning effect. -
-

1. establish Hue Saturation adjustment layer, saturation -49,
2. to establish an optional color layer, red: -49,0, +7, -41. Yellow: 0,0,0 , -23
3. to establish the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26. White: 0,0, +46,0. Intermediate colors: 0,0, -6,0.
5. Optional color. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, noise reduction, sharpening, painting and simple to use tool to repair the knee approximate The blot,
7. plus hidden corners, making a heart-shaped selection, emergence, with the curve provides bright. -
-

1. Copy a layer into intelligent filter for the purpose of the filter effect can be adjusted
2. Filter - Render - Lighting Effects, all light sources, negate 17, Matte -25, plastic effect of 100, underexposure 32, negative 28,
3. New optional color adjustment layer, red: -100, -3,03,0. Yellow: -59, -6, -23, +1. Green: +9 , +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Intermediate colors: +16, -18, -18, -3. Black: 0,0,0, +28 -
-

1. slightly adjust color hurl, adjusting a rough tone, establish Levels Adjustment Layer, Levels all channels: 0,1.35,255. Levels of red channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. To establish the Hue / Saturation adjustment layer reduces the saturation of original, Full Figure saturation -30
3. to create a Photo Filter adjustment layer, the first step in the blue has all over with this step to deep yellow, the concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, prop down the ctrl points of red channel, get back to photos selection populate the black mask filter.
4. to establish an optional layer of color adjustments, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. The windows brighten the extra, the establishment of the Hue / Saturation adjustment layer to part in the window and wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, to discriminate the characters and the surrounding environment, the set after the mask used in the large soft black brush to figure as the hub angle rub a bit on it. Levels +20, +20, +40, select midtones
7. building Levels adjustment layer, the premier Ministry of dark and light common points out, the mask using the gradient tool to pluck a black and white, black and white from the top right to base left corner of the gradient, to the right so far. Full channel 0,0.80,255
8. Add light, use the , the upper left corner a bit dark, so add a mask to wipe out the upper left corner. Points of light, strength: 28, Focus 52, gloss -100, materials 100, 17 exposure, environmental 32
9. Create a new layer back, look by light and dark contrast to enhance the establishment Levels adjustment layer in the mask gradient tool with black and white drawing, from the upper left to lower right corner of the black and white gradient, the upper right corner of the light is completely obscure the part of the mask with a white brush in the brush out, and then figure out from the mask in the brush. Levels all channels. Levels full channel: 0,0.80,255
10. Sharpening, a little dermabrasion, add the word to complete. -
-

1. New gray wrapping, with a curve to adjust the brightness, 152,124
2. cutout eyes and jaws, to be accented,
3. dwindle the overall saturation, saturation -56
4. with a color overlay to the overall color of the tendency,
5. conceal the hue and color overlay layers, and open access panel, copy the R channel,
6. Create a new layer paste and adjust the transparency with a color filter pattern -
-

1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, invisible, back to the background layer,
5 . to get in front of the high-light selection adjust the curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, boost,Lacoste UK, alternatively an applicable adjustment to the color, brightness +4, contrast +7-
-

1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black class color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 . to get in front of the high-light selection adjust the curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or an appropriate adjustment to the color, brightness +4, contrast +7-
-

1. Select the blue channel
2. channel mixer, hook the
3. resurfacing, landscaping figure form.
4. to give people the skin and raiment with parameter default; use later the effect of blue, also need to use the
6. to the effect of step 6 are mixed mode to
8 ..
9. fine-tune the see or facial skin color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The -
-

1. Create a new layer, filled with yellow, overlay mode, numerical 247,240,197
2. Copy just the yellow layer, Linear Burn mode, the mask given rise to the yellow automobile, avoid car color through yellow,
3. adjust brightness, contrast, high light color and exposure of part of the normal subject, brightness -20, contrast +64, the new adjustment layer saturation, saturation -31. to determine the final brightness of the sunshine to high light at the color and detail prevail in the dark can be ignored,
4. Duplicate the background layer the shadow highlight adjustment, the best place to shadow elaborate for the base, shadow: the number 100, color length 33, radius of 102, high light: the digit of 0, hue width 50, radius 30, to adjust: +20 color alteration, contrast adjustment among 0 and 0.01% of the construction of black, white construction 0.01%
5. Duplicate the background layer to adjust the sky brightness, with the layer to make up the sky over exposure deficiencies,
6. tuning the details, to wipe the sky wires, repair, Clone brush will do,
7. Flatten image, fine-tuning the details, sharpness -
-

1. buckle out of symbol, adjusting photo color, contrast and excessive consideration to the photo did not make light of the thighs in place absence to be adjusted
2. adjustment of skin color, clothes color, mainly used to adjust the layer , then add the background material, reflection, etc., pay attention to the feet point down the extend with the Free Transform to adjust the deformation of drops
3. in the legs add a little high light, high light pen location outline, fill Gaussian white --- Fuzzy --- reduce transparency can also be filled with 50% gray pattern of the new soft layer --- --- Dodge tool used to draw roads lead to Rome, can easily reach the destination can
4 . material, the text with a press, the last sharpening can -
-
-
-1. the picture opens, find some form alike to the palace.
2. will be discounted from the house and put a new layer. You can use the Polygonal Lasso tool to select housing, and through a relatively soft eraser tool to erase the background.
3. immediately need a new background, from the material library to elect a
4. the sky into the rear of the house (atmosphere layer into the housing layer beneath), and add a little perspective deformation effects of the sky to increase the depth of the background.
5. observe the edge of the house, there still remain some of the original color of the sky above.
6. with the magic wand select the regional housing ground space, and then do Select> Modify> Expand bid to inflate the range of options,Lacoste Swerve Keyline Trainers, enter an appropriate value of the selection to contain the need for color correction house edge. Executive Image> Adjust> Hue / Saturation command to adjust the color of the edge of the roof the same color.
7. continue to use the Hue / Saturation to adjust the housing and the color of the sky to qualify them to coordinate likely integration.
8. will must remove the palm trees next to the house, with the copy stamp tool to copy the house to draw tiles between the part of the ground and first floor.
9. add to a lock of lightning added to the screen traction. No feathering effect using the brush to draw a lock of lightning, copied to a new layer, add the flicker effect. Then use the Dodge tool to highlight the roots of lightning clouds.
10. using hand-drawn pictures or around the house to add some dead tree, memorize to adjust the color and brightness.
11. To make the house look more worn, painted on the roof of a chasm.
12. Continue to add the effect of mar. Broken beams and aqueduct, to damage variant roof and glass. To break things and then copy the stamp tool to use to fill the place vacated
13. Add some stains. First, the windows, with an irregular brush to add some variegated glass. Then change the layer blend mode stain it with a good glass can be mixed together. I used this tutorial brightness mode.
14. on the whole house to reiterate the same treads, using a mini deeper color and blend mode set to overlay mode. Attention to seams and edges, this place is the most prone to stains.
15. portico distended detail.

1. into the channel panel, and then use the
Channel Green - Mixed Multiply, opacity 20%
channel red - mixed dark, opacity 100%
2. adjustments - color balance - high gloss - Levels: -8, +13, +11
3. blue channel during the first application image, layers: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little bit, br> All channels 6,0 and blue channels 4,15
5. Copy a layer copy of the out of the blue channel of the operation another, mixed Multiply, opacity 50%
6. The last thing is famous figures, and with the eraser, given rise to some people, pay attention to the appropriate lower transparency. -
-

1, this effect can be directly transferred with curves out over the whole channel is about 1 / 4 grid,New Lacoste Trainers High Top,
-105.125 green channel, blue channel 151.254
2. with lens correction to add black borders. Add Noise which Vignette - the number of -28 (dark), the converge +5,
3. with brush tool on the Internet under the pen of a scratch about in the above picture and then merge the layers
4. Add Noise, Quantity -2.45
5. to make a side -
-
-
-1. Duplicate the layer blend mode to Screen,
2. Coated 2 eyes mask reverse clashes
3. back (alt + ctrl + shift + E)
4. channel medleys, select the color, red +54, Green +54, Blue +32
6. Mixed Mode - are stacked
7. on the back layer to adjust the image - adjustment - Shadow / high light - Shadow: 50,50,144
high light: 0,50,30
Midtones: 20,0
0.01,0.01
8. again back
9. wipe away the right cheek with the stamp of the sun
10. with the Dodge tool - the range of high light intensity of 50%, given heave to the eye reflection, only rub the eye black,
14. for a long time less saturated red hue, or other fine-tuning to attempt

1. Duplicate the layer, the overall provides sunny, curved top right,
2. with a selection tool to circle the nose and hooks, and then brightens with curves to highlight the nose and hooks
3. color balance - high light - Levels: +8,0, -22
midtones - Levels: -10, +29, +27
Shadow - Levels: -2, -3, +14
4, can be Select Color - Red: 0, +1, +23, -29
Available colors - Yellow: 0,0, +4, +28
5. adjust the affected skin, a little pressure dark colors
6. with a curve to highlight the texture of the tank oppression of dark, black is the mask, the mask with an adjustment with a agreeable general amend one o'clock
7. brighten the overall color, top right of the curve,
8. Finally is a revision of the lips,
9. add text -
-
-
-
1. use the
2. using ctrl + I RP operation:
3. Levels using ctrl + L to adjust values ​​for [145,1.5,160]
4. transferred into the general layer, after a new blank layer and fill it with black on the bottom.
5. using ctrl + T to free transform, the use of viewpoint.
6. replica this layer, and use the free become the perpendicular flip.
7. aline the 2 layers, and connect together.
8. use the Free Transform to adjust the zoom function of height.
9. use the color filter


must remember that 20 varieties of PS technology! ! ! The United States will not do your photos! ! !

a easy digital photo retouching
1 open late pictures, like the implementation of color / saturation (-40) to reduce saturation.
2 new layer, the layer mode to soft light, with the brush tool ambition need to scour the part of the drawing several times, where you can lightly extract the color palette accustom
3 pictures soft color conversion is not enough, then about the implementation of the following Gaussian blur filter (+85)


simple with photos came to light less than
1 Open the image, copy the background layer, change the background color filter layer pattern
2 Levels of the background layer to adjust

30 秒 get Plmm aesthetic photos
1 Open the picture, copy the background layer twice
2 for reproducing the backdrop layer a Gaussian Blur (radius 4 to 6), copy the backdrop layer to the second mode of light
3 new layer, add filling pattern (half of pre-defined gray well and half white horizontal stripe pattern), set Mixed Mode to Multiply

image dislocation effects
1 Open the picture, a new layer, select the View - the governor, select the shake tool, respectively, from the top and bottom haul out two blue marking (9 cell)
2 using rectangular selection tool, fill the box (dark gray 1,9, 5,7 black, 3 light gray) to psd format, and then near the file
3 implementation filter - distort - the replacement, select the retention psd file
Notes (the corresponding image pixel to the left and upward; black (color value = 255) is the largest positive displacement, that is the corresponding image pixel to the right and down; gray (color value = 128) does not generate displacement )

shading effects
1 Open the photo image, Select - Select All, then Edit - Copy, establish a new channel, Edit - Paste to paste the copied images into the new channel ]
2 implementation of the image - adjustment - Anti-like, back to RGB channel, amend - remove, delete the original image
3 to Select - Load Selection, phone the new channel, Executive Editor - fill (the color )

atomization
1 Open the picture, a new layer, set foreground / background color (black / white), to Filter - Render - Clouds, add a layer the layer Repeat masking
2 filter - render - clouds, image - adjust - brightness / contrast (80,0, a mode to color filter layer)

People illustrator effects

1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray, +30, +60, +10, monochrome), to Filter - Stylize - Find edges, remove the noise
2 Levels of mixed mode to , +155) the implementation of form, color image communist
4 - adjustment - optional color, fine-tuning of color (red, 0, +100, +100, -75; yellow, 0, -40, +100, - 40)

old photos using the color overlay to add light and color effects
1 Open the image, copy the background layer, the implementation of the image - adjust - to color, adjust brightness / contrast (-42, +18 )
2 Add Halo (brightness +100)
4 Duplicate the background layer, additional again,
1 Open the picture and copy of a The layers in the replication of a mouse, the sky turned blue

handling selected according to the shadowy Art
1. copy an original layer (Ctrl + J).
2. Gaussian blur on the copied layer Filter (+4.0).
3. do color adjustments (+50,0, -64)
4. wipe with a soft-edge eraser clear need for some.
5. the appropriate use of Figure mixed layer.

create hazy in bright (landscape, ecological type)
1 Open the image, copy the layer.
2 copies of the layer blending mode to reducing the transparency.

a photo to add a glass effect
1 selected space, reception Ctrl + J
2 Gaussian blur on the mow layer (+3.1 pixels).
3 to adjust color balance (-39, +29, +16).
4 new layer. Choose the thickness of the glass area add a custom gradient filling (black and white gray, the mandate is dark, glossy, dark, high light), press Ctrl + T on the constituency to adjust the thickness of the glass.
5 filter - distort - Glass , select your preference pattern (distortion, smoothness of 1, zoom 50%).

scalding paper effect of the old photos - PS handling $
1 pure open a picture, the implementation of image - Adjustments - Hue / Saturation (+1, -58, +1).
2 Image - Adjustment - change (mid-tones, deepen yellow, deeper red highlights).
3 Duplicate the background layer, Go to Filter - Texture - molecules (9,56, vertical).
4 new layer, the implementation of the filter - Render - Clouds.
5 and escape the image - adjust - brightness / contrast (+27, +100).
6 with the Magic Wand, select one layer of black constituency.
7 off layer of a preview, click Copy the background layer, the foreground color to dark brown.
8 to Select - Modify - Expand (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer an, with the wizardry wand select the background of black constituency
10 off layers and layers of a preview, copy the background layer selected, Executive Editor - Clear.
11 image - sheet size, height / width of one centimeter was increased, positioning (in).
12 opened the background layer preview, select the background layer and fill the foreground color (light brown).
13 Duplicate the background layer selected, do Layer - Layer Style - projection. (positive end laminations, 45% opacity, angle 45, from 7 to expand 2%, size 10).
14 mix always layers.

Art mottled effect of another system of decree
1 border to create a new file key fill background by D White
2 Next, filters --- --- performance clouds.
3 CTRL + M to adjust under the curve (high contrast black and white).
4 After completion of the effect of further next filter - distort - Glass (7 Distortion, smoothness, 3, texture - canvas, zoom 50%).
6 Create a new layer, the background is black, the other a new layer, add sufficient white rectangle.
7 situated in the rectangular layer on the implementation of filter - distort - replacement, select the default discretion. Then detect the newly saved PSD file can be replaced.

PS rendering the air of your photos (landscape)
1 Image - Adjust - Levels (RGB +29,1.0, +234) . form, color Doctrine l2wvg.V 'T @ 4I
2 implementation of the Hue / Saturation command (full size -14, +41, -1).
3 continue to Hue / Saturation (red, hue value decreased , saturation increase).
4 continue the hue / saturation (yellow, -22, +45, -1). www.swcool.commDZ-u
5 continue to Hue / Saturation (green, + 15,0,0).
6 adjust the brightness / contrast (brightness diminish / increase contrast). Xingse doctrine (H {T2P4ccN

simple and easily sketch effect

1 Open the picture, do to the color, adjust brightness / contrast (brightness decrease / increase contrast).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation of Filter - Style - find the edge, then the UXXXXX sharpening, then
layer mode to Overlay.
3 new layer, fill the white, add ruckus, then the film blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%), obliterate some of the high light.

strokes painted limn effects
1 Open an image, Duplicate the background layer, select Layer 1 copy to Filter - Blur - Gaussian blur (2.0 pixel)
2 Duplicate the background layer again, select Duplicate Layer 2,Womens Lacoste Observe Trainers, the implementation of the filter - sketch - watercolor pen ( 20,60,80), the layer blending mode to darken.
3 Duplicate the background layer again, select Duplicate Layer 3, the foreground color to red, to Filter - Sketch - Sticky Notes ( 25,7,10), opacity set to 30%.
4 Duplicate the background layer again, select Duplicate Layer 4, the foreground color set to black, foreground / background color set to black / white, and the implementation of Filter - Sketch - Photocopy (1,50), the Executive Levels adjustment (RGB, 157, .0,159), filled with the value of 30%.

simple way to do special photos
1 Open a picture.
2 selected the blue channel in the channel, and then in the blue channel to Filter - Stylize - overexposed, you can point back to the RGB channel.

Matrix effects
1. Create a size of 500X300, RGB mode, the white background periodical.
2. with a text input tool for channeling 01 randomly enter a code, press CTRL + T to put it over the vertical rotation, and a few multi-copy a pull into the range size, placed at random a few. Another method is to use filters, you can achieve very good results. Is the menu - Filter - Texture - particles, the intensity and contrast are adjusted to 100, particle type selection vertically on it.
3. To those 01 code all the text layer and merge the background layer, and the foreground color set to R: 100, G: 255, B: 0 all but green, the background color set to black.
4 Select Menu - Filter - neon light effect, radiant size set to 10, brightness to 15.
5. Select Menu - Filter - Stylize - light edge, the edge width is set to 1, the brightness set to 20, about the smoothness set to 1.
6. Select the list - Image - Adjust - Brightness / Contrast , the sunlight to -10, the contrast modified to approximately 60

Ps The cleaning process is used to flush negative slides, it would be relatively strange and interesting colors. If the MM portrait photograph, will make even filled with a decadent decadent avant-garde colors.
1 Open the image, and let the right shows channel, into the channel, into the channel, into the Select favor the panel selected the red channel, into the .
8 control panel in the channel all the RGB channel selected, go to all the RGB channel selected, go to