Windows 7 32bit Illegal operation must master Deta

To facilitate inquiries, this does not make the paging processing.
1. Quit error number: 0x0000000A

Caption: IRQL-NOT-LESS-OR-EQUAL

the typical reasons: the driver employed an incorrect memory address.

Answer: In case you can't login, then restart your laptop or computer. Once the list of readily available running program, press the F8 key. Within the Windows State-of-the-art Possibilities Menu display, pick configuration any Windows updates or driver.

run by laptop or computer producers to offer all the technique diagnostics software, particularly the memory check.

disabled or Eliminate freshly set up hardware (RAM , adapters, tough drives, modems, and so on.), drivers or software program.

to guarantee that the hardware system drivers and technique BIOS would be the newest edition.

ensure the producer can help you whether or not the newest version, may also enable you to get the hardware.

Disable BIOS memory choices for instance cache or a shadow.

2. Stop error number: 0x0000001E
Description Text: KMODE-EXPTION-NOT-HANDLED

the typical factors: kernel-mode process tried to execute an illegal or mysterious processor instruction.

Remedy: Be sure there's enough space, particularly within the time to perform a brand new installation.

if a Stop error message that a certain driver, then disable him. If you ever can't start the laptop or computer. need to try to begin with Safe Mode to eliminate or disable the driver.

If you have non-Microsoft supported video driver, attempt switching towards the standard VGA driver or to supply the appropriate driver for Windows.

disable any freshly set up driver.

guarantee that the most recent edition on the method BIOS. hardware manufacturers to help figure out whether you've got the newest edition,microsoft Office 2010 License, it is easy to also help you get him.

BIOS memory solutions As an example, cache, shadow.

three. Stop error amount: 0x00000023 or 0x00000024

Caption: FAT-FILE-SYSTEM or MTFS-FILE-SYSTEM

normally Trigger: The difficulty occurs in Ntfs.sys (allowing the method to study and write NTFS driver driver file) in.

solution: Run by the laptop or computer technique manufacturer diagnostic software, particularly hardware diagnostic software.
disable or uninstall all anti-virus software program, disk defragmenter, or backup system.

the command prompt, run Chkdsk / f command to examine the challenging drive is damaged, and then restart laptop or computer.

4. Stop amount: 0x0000002E

Caption ATA-BUS-ERROR

the normal factors: the system memory parity error, typically by hardware challenge triggered.

Solution: Remove all recently put in hardware (RAM. adapter. challenging. modem, and so on.).

run by pc system manufacturers to give diagnostic software program ,Windows 7 32bit, specially the hardware diagnostic software.

make sure that the hardware device drivers and system BIOS are the most recent model.

hardware suppliers to supply program diagnostics, run the memory verify to acquire fault or does not match the memory.

Disable BIOS memory alternatives such as cache or a shadow.

right after starting the listing of readily available running system, press F8. Within the Windows Innovative Selections menu display , choose p>


five. Quit amount: 0x0000003F

Caption: NO-MOR-SYSTEM-PTES

the usual reasons: the correct of every clean-up yo driver.

Remedy: Disable or uninstall all anti-virus software program,Office 2007 Professional, disk fragmentation or backup processing program.

6: Quit error amount: 0x00000058


Caption: INACCESSI-BLE-BOOT-DEVICE

frequent trigger: initialize I / O method (generally refers towards the boot system or file program) failed.
remedy: boot sector viruses generally cause this Stop error. could be the newest version of anti-virus software, verify your personal computer for viruses. Should you come across a virus, you have to not appear to put into action the vital supernatant was removed from his laptop or computer, see the antivirus software documentation for how you can carry out these actions.

remove all newly installed hardware (RAM,Office 2007 Activation Key, adapters, modems, and so on.).

MIcrosoft verify the Hardware Compatibility Checklist to guarantee that all hardware and drivers are appropriate with Windows.

In case you are employing proper SCSI adapter, readily available from hardware vendors additionally to the most recent WINDOWS driver, disable the SCSI gadget Synchronous consultations, examine regardless of whether the finish on the SCSI chain and matching device SCSI ID, if not sure methods to do to these steps, refer to the documentation of hardware devices.

For anyone who is utilizing IDE devices, the definition from the board IDE port because the only main port. examine the IDE system grasp / slave / distinctive setting. Eliminate the tough drive additionally to all IDE gadgets exterior. When you cannot identify how the implementation of those do not look for, refer to your hardware documentation .

In case the computer is formatted working with the NTFS file technique, you possibly can restart the laptop or computer, and then run about the program partition Chkdsk / f / r command. Should the program cannot start due to an error, then make use of the command console and run Chkdsk / r command.

run Chkdsk / f command to establish regardless of whether the file program damage. If Windows can not run Chkdsk command to move to one more drive on the pc operating Windows, then this pc Chkdsk about the drive to run the command.

eight. Stop error amount: 0x0000007F

Caption: UNEXPECTED-KERNEL-MODE-TRAP

the usual reasons: is normally induced because of hardware or software troubles, but normally caused by hardware failure.

Remedy: examine the Microsoft Hardware Compatibility List to make certain that all hardware and drivers are appropriate with Windows. Should the personal computer motherboard the challenge arises not appropriate.

Remove run through the recently set up hardware.

run by pc manufacturers to present diagnostic software program for all systems, in particular the memory verify.

Disable BIOS memory solutions which include cache or possibly a shadow.

9. Stop error quantity: 0x00000050

Caption AGE-FAULT-IN-NONPAGED-AREA

the usual factors: memory errors (data not use paging file-swapping to disk).

Solution: Eliminate all of the freshly put in hardware.

Run by the pc manufacturers to present all the technique diagnostics software program. specially the memory examine.

check is effectively installed any new hardware or software, if this can be a new installation, make contact with the hardware or software producer linkages, entry could be required for almost any Windows updates or driver.

disable or uninstall all anti-virus system.

Disable BIOS memory selections for example cache or even a shadow.
ten. Stop error number: 0x00000077

Caption: KERNEL-STEL-STACK-INPAGE-ERROR

the typical factors: no paging file from your kernel information pages to be read into memory.

Remedy: Use the most recent version of anti-virus software, verify your laptop or computer for viruses. In the event you discover a virus, carry out the important actions to eliminate him from your pc supernatant . Please refer to the manufacturer's diagnostic software program for all methods, in particular the memory examine.

Disable BIOS memory solutions for instance cache, shadow.

eleven. Stop error amount: 0x00000079
Caption: MISMATCHED-HAL

the normal reasons: the hardware abstraction layer with all the kernel or machine sort mismatch (in most cases occurs in single-processor and multi-processor configuration files are combined within the same program the situation).

Solution: To resolve this error,Windows 7 Enterprise, use the command console to exchange the program files on the computer error.

single-processor program kernel file is Ntoskml. exe, and multi-processor method core file is Ntkrnlmp.exe, but these files towards the file around the installation media, respectively; within the set up of Windows2000 and, regardless of which make use of the unique files will be renamed to Ntoskrnl. exe file. HAL file also makes use of the title of your Hal.dll after set up however the installation media, set up media, but you can find several achievable HAL files.

twelve. Stop error amount: 0x0000007A
Caption: KERNEL-DATA-INPAGE-ERROR

the usual reasons: no kernel data in the paging file will study the required page into memory. (in most cases on account of the paging file The failure, virus, disk controller error, or caused by the failure on the RAM).

Answer: Use the latest version of antivirus software to verify no matter if there is a computer virus. For those who discover a virus. the implementation of the necessary steps to eliminate him from the supernatant computer, see the software documentation to know easy methods to drop ill diploma of implementation of these actions.

If the personal computer is formatted making use of the NTFS file technique. can restart the laptop or computer, after which partition the system run Chkdsk / f / r command. In case the error can not begin the command, then make use of the command console, and run Chkdsk / r command.

run by pc manufacturers to provide all of the systems in a aspect software program, in particular the memory check.

thirteen. Quit error amount: 0xC000021A

Caption: STATUS-SYSTEM-PROCESS-TERMINATED

the normal reasons: the user mode subsystem, for instance Winlogon or even the Consumer Server Runtime Subsystem (CSRSS) has long been damaged, it can no lengthier guarantee security.

Remedy: Remove any freshly put in hardware.
In case you can't login, then restart your laptop or computer. When the listing of on the market operating method, press F8. Windows2000 State-of-the-art Possibilities menu on the screen, choose:
run the Recovery models, and permit the program to restore any detected mistakes.

14. Stop error quantity: 0xC0000221

Caption: STATUS-IMAGE-CHECKISU7M-MISMATCH
the usual reasons: the driver or technique DLL is corrupted.

Remedy: run the fault recovery console, and allow the program to fix any detected mistakes.
In case you add RAM for your laptop or computer right away soon after the error happens, then the paging file may possibly be damaged, or by the failure or the new RAM just isn't suitable. Pagefile.sys and return the system to eliminate the original RAM configuration.
run by the computer manufacturers to present all of the system diagnostics software program, particularly the memory verify.