Ten units had
computer, each and every pc connected to a hub to kind a tiny local region network; the latest reorganization on the unit, and obtain a dozen computers, these computer systems is connected to an additional a hub in the type of a distinctive section with the LAN. Now you need to allow the two unique segments of the computers can ping one another pass,
Office 2010 Activation Key, but in addition to the exchange of visits through the Network Neighborhood window, so lengthy as the two hubs to connect diverse network segments, although linked to a routing perform change or router on it. While this strategy is relatively effortless to put into action, but requires investment funds to buy a router or switch, it really is crystal clear the strategy is quite financial. Is there a method to invest in no situations, can obtain these two distinct segments for the sub trade of visits it? The writer meticulously, connected to ensure that we can accomplish these two distinct segments from the subnets straight the purpose in the visits. Now, let us take a look at the way to
ready to function
assume prior ten computers, local location network consisting of a through the hub for the A subnet, then acquire ten computer systems through hub B LAN subnet because the B component; now want two subnets in all computers can ping one another by means of it, you should 1st use a crossover cable to Hub A and Hub B cascaded to make sure that the bodily connection in between the 2 subnets.
Next, installed in a Windows 2000 Server pc, two network cards put in around the exact same time, after which use the straight-through cable to card A as well as the hub connecting A, B and set the line card system B connected.
So right after doing the previously mentioned preparations, now requires Windows 2000 Server pc to Windows 2000 Server computers in the Click on the Nearby Area Connection one tab web page, click Then the IP handle in the card A is set to A subnet handle. As an example, if the segment A subnet deal with 255.0 >
4, total the card's IP handle binding task A, after which click TCP / IP parameter configurations window; in the window, you could be the IP tackle of network card is set to B B subnet deal with. For example,
Office Pro 2007 Key, in the event the segment B subnet deal with 255.255.255.0 subnet gateway deal with.
accomplished the task parameters over, Windows 2000 Server computer can not merely pass A subnet ping any pc, may also pass B subnet ping any laptop or computer, and Windows 2000 Server computers that
allow routing services
Windows 2000 Server pc to allow this method, routing and remote entry features:
1, Windows 2000 Server computer, click the Resources configuration title), from your implementation on the pop-up menu > Figure three
3, the on-screen prompts,
Windows 7 Starter, click on The button, the technique will pop-up The protocols are about the checklist > 5, and then click on interface
Figure 6
6, Windows 2000 Server pc thus develops into a accurate virtual router,
Windows 7 Pro Key, it could switch the router to connect numerous subnets.
set the parameters for each workstation, stage to let a unified gateway deal with IP tackle in the virtual router. As an example,
Office 2007 Professional, set A subnet network parameters of a workstation, you can open it prior to the (be careful to not repeat using the other current tackle), it will mask the handle is set to is also set to assets, but additionally entry to subnet B of any 1 station inside the sharing of sources; Similarly, B subnet IP deal with of any one workstation need to be set to 1, the Renyiyitai workstation.
Office 2007 Professional Windows 2000 Server virtu
Linear Mode
