or install the program is running

[fjajopi1jd]

one, ready to work:
how to reinstall the computer system
First, start the computer while holding down the DELETE key to enter BIOS, select Advanced BIOS Features option, and press the Enter key to enter setup. Select First Boot Device option, then press the keyboard Page Up or Page Down key to set the CD-ROM, so you can start the system to the disc.
Second, the return to the main menu, save the BIOS settings. (Preservation method is to press F10, then press Y button)
1. Prepared to simplified Chinese version of Windows XP Professional installation CD, and check the drive is supported from the start.
2. possible, before running the installer with all the hard disk to scan the hard disk error checking and repair, or install the program is running, such as checking that there is an error that will be hard very troublesome.
3. file with the paper records the product key to install (installation serial number).
4. possible,miu miu handbags, with the driver backup tool (such as: Driver Genius 2004 V1.9 Beta.exe) all under the original Windows XP driver backup to disk ( such as: F: Drive). Best to note the motherboard, network card, video card type and other major hardware manufacturers, pre-download the driver for use.
5. If you want to format the C drive during the installation or the D drive (recommended format the C drive during installation), back up the C drive or D drive useful data.
Second, start the system with a CD-ROM:
(if you already know the way, go to the next step), reboot the system and the CD-ROM set First boot disk, save the settings and reboot. The XP installation CD into the drive, restart the computer. Just started, as shown when there is press the Enter key when the fast, otherwise the system can not boot XP CD. If you do not know the specific practices, please refer to the same with this -> how to get into pure DOS system:
CD-ROM from the start, if no accident to see the installation screen will appear as shown in Figure 1
;
View Original
prompted all Chinese, View original
license agreement, there is no choice, according to partition,coach baby bag, format the C drive if you have select the C partition, select a good partition and press format,coach leather handbags, which convert the file system format, or save an existing file system, a variety of choice, but note that the NTFS format to save disk space, improve security and reduce disk fragmentation but there are many problems and MacOS 98/Me can not see the NTFS partition, here, choose Figure
warning format C drive, press the F key will be ready to format the c drive, there is shown in Figure 6 under the original


view of the selected partition C space than 2048M ( or 2G), FAT file system does not support more than 2048M of the disk partition, so the installer will use the FAT32 file system format to format C drive, press the br> View original image in Figure 7 is formatted C partition; only start with the CD or install XP Setup boot floppy disks to provide during the installation process format the partition option; If you use MS-DOS boot disk into DOS, run i386 winnt to install XP, install the XP partition without formatting options. Format C partition is completed, there is shown in Figure 8 under the original


see Figure 8 to begin copying file, copy the file after the installation program begins to initialize Windows configuration. and then the system will automatically restart in 15 seconds. restarts, there is shown in Figure 9 under the original


View 9

View Original
than 5 minutes later, when the prompt appears when needed 33 minutes following figure 10

View Original
regional and language settings to use the default value can be a direct point of the Next step this password, Administrator System Administrator has the highest authority in the system, usually landing system does not require the account. Then click ,Second line, choose Beijing, click Original
allows you to choose the means used by the network installation, select a typical set point
View Original
continue the installation, here after do not you participate in, the installation program will automatically complete the whole process. automatically restart after the installation is complete, the splash screen appears, as Figure 19

View Original
first start takes a long time, please be patient, followed by the welcome screen, set the system prompt, as shown 20

View Original
click the bottom right corner of the
View Original
here to create a broadband dial-up connection, not dial-up connection on the desktop shortcut, and dial-up connection the default name Wizard to create a broadband dial-up connection, dial-up connection on the desktop shortcut, and the default dial-up connection named button.
here I first create a broadband connection, select the first

View Original
Telecom or China Unicom are currently using (ADSL) Residential users have accounts and passwords, so I chose , as shown in Figure 23

View Original
Telecom or China Unicom to provide input account and password in the The name of the menu, and if left blank the system will automatically create a file called the dial-up connection, Microsoft certainly want you to activate XP you, but even if there does not activate the 30-day trial period, why the hurry? choose Figure 25 shows

View Original
you normally enter a user name to login the computer, click the Next button appears as shown below 26

View Original
Click Finish to complete the installation. the system will log off and log a new user. landing desktop as below 27

View Original
six, and find common icons
; on the desktop start -> connect to -> broadband connection, as shown 32

View original
left point Office on the desktop can be seen more than a the open display the bottom left of the graph click on the My Network Places