,
团购网
| Back to logs list
10004909 2008 年 12 月 12 日 23:33 Reading (loading. ..) Comments (0) Category: Personal Diary
; computer starts the first phase - Power On Self Test (due to different display board self-test the integrity of information are different.) But no matter what the motherboard, self-test at this stage if an exception take places,
・・・C - Qzone日记, it will jump out of a variety of English phrases. Do not ignore these phrases: beconduce to it contains very significant information, read this information can be very convenient to resolve the issue yourself. Now some of the common \
1.CMOS battery failed
Chinese: CMOS battery failure.
treatment: replacement of the board as long as the button battery.
2.CMOS check sum error-Defaults loaded
Chinese: CMOS implementation of all inspection found an error to load the system defaults.
treatment: button batteries can first try another motherboard. If the problem still not addressd, then the description of CMOS RAM may be a problem, only to be replaced.
3.Press ESC to skip memory test
Chinese: memory check in progress,
人生中所遇到的四个人 - Qzone日志, press ESC key to skip.
processing: This is bespark off there is no setting in the CMOS memory to skip the second, third and fourth test, the boot will perform four times the memory test. Press ESC key to end of course the memory check, but every time it was too cumbersome. You can choose to enter COMS setting BIOS FEATURS SETUP, will be one of the Quick Power On Self Test is set to Enabled, save after the restart.
4.criticalboard error or no crucialboard represent
Chinese: keyboard error or keyboard not connected.
handling: Check the keyboard connection is loose or damaged.
5.Hard disk install failure
Chinese: the hard disk installation failed.
processing: This is beprocure the hard drive power cable or data lines may not be connected properly or the hard drive jumper settings. Can check the hard drive is plugged in the root of the connection to see if a data line with two hard drives the jumper settings are the same, if, as long as the two hard drives can not the same jumper settings ( A set Master, the other set to Slave).
6.Secondary slave hard fail
Chinese: from a disk failure detection
treatment: CMOS settings may be inappropriate, for example, but not from the disk in the set to a CMOS from the disk, then there will be mistakes, then you can choose to enter COMS IDE HDD AUTO DETECTION set to automatically detect the hard disk. It may be hard drive power cable, data lines may not be connected or the hard disk jumper set incorrectly, the solution with reference to Article 5.
7.Floppy Disk (s) fail or Floppy Disk (s) fail (80) or Floppy Disk (s) fail (40)
Chinese: Can not drive floppy disk drive.
processing: The system prompt can not find the floppy drive, floppy drive to see the power lines and data lines are not loose or connected wrong, or the floppy into another machine on the try.
8.Hard disk (s) diagnosis fail
Chinese: the implementation of the hard disk diagnostic error.
Treatment: There is this general failure that is the hard disk itself, you can put on the hard disk into another machine to try,
上海团购, if the problem still not tackled, can only repair and replacement.
9.Memory test fail
Chinese: memory test failed.
treatment: reseated memory to see if it resolved. This problem usually occurs beinduce the memory is not compatible with each other, one enchant it,
长沙团购网!
10.Override enable-Defaults loaded
Chinese: the current CMOS settings can not start the system, load the BIOS default values in order to start the system.
treatment: generally the COMS set in error, just go to COMS Select LOAD SETUP DEFAULTS settings loaded into the system to previous settings and then restart.
11.Press TAB to show POST screen
Chinese: Press TAB key to switch the screen display.
treatment: Some OEM manufacturers will display their own design to replace the BIOS default boot display, we can press the TAB key - the default in the BIOS boot screen with the manufacturer of custom screen to switch between.
12.Resuming from disk, Press TAB to show POST screen
Chinese: restore boot from the hard disk, press TAB show POST screen).
processing: This is begenerate some motherboard BIOS supplys the Suspend to disk (the hard hang) function, if we use the Suspend to disk way to shutdown, then we will show in the next boot The prompt message.
13.Hareware Monitor found an error,
上海团购网, enter POWER MANAGEMENT SETUP for details, Press F1 to continue, DEL to enter SETUP
Chinese: monitoring errors are found,
北京团购网, enter POWER MANAGEMENT SETUP View Details by F1 key to continue the boot process, press the DEL key to enter COMS setting.
treatment: Some motherboards with hardware monitoring function, you can set the motherboard and CPU temperature monitoring, voltage regulators, voltage Output Level fan speed monitoring and surveillance of all, when the monitoring function in the boot find that there are unusual circumstances, then these words will appear above, then you can choose to enter COMS set the POWER MANAGEMENT SETUP, at the right ** Fan Monitor **,
Beloved Premier Zhou Enlai - Qzone log,** Thermal Monitor ** and ** Voltage Monitor ** View Which part of the issue of an exception, then add to tackle.
Linear Mode
