scarpe Hogan uomo Slope stability and reliability

Slope stability and reliability of the stochastic finite element analysis


Reliability index of slope stability calculations Table2Thecalculated slander e | ofdindex Lu oftheslopestatrait, / byperturbationstocha + ac note ; 1 refers to the c, modeled as random , 2 refer to c, seen from the above results . When the c, 'P is modeled as random . Reliability index increased by 30 % of the project , in line with the actual situation, because the distribution parameters for a single random variable simulation will overestimate their variability ,Ralph Lauren Preisen, calculation of the variability to be increased , or the reliability index to be reduced; otherwise reliable degree index will increase . Consider c, the negative correlation , the reliability index to be larger ,Billig Ralph Lauren Polos, but the magnitude of changes is not very significant. Calculated using stochastic finite element slope stability of the overall reliability index a = 1.127-1.558 , relative to the upper structure of the target reliability index or light -based stable reliability index lower , with the possibility of greater instability . while the uncertainty analysis method = 1.185 . to meet the stability requirements; but the reality is , in the summer dry season, the slope failure , resulting in a wide range of circular sliding , sliding surface is dry , no signs of permanent role this paper the results reflect this reality. 6 Conclusion probability in geotechnical engineering analysis ,Ralph Lauren Polos Human bird flu treatment progra, largely through a single random variable model , with one-dimensional Airport models and stochastic finite element models of three phases , stochastic finite element model of the biggest advantages of the finite element analysis techniques and reliability combine to consider a variety of random factors affect the results of the calculation ,scarpe Hogan uomo, the results can be more reliable in slope stability analysis,Billig Ralph Lauren, soil- parameter variability, correlation and probability distribution factors have a greater impact on the reliability index , must obtain enough statistical information and in-depth study of slope stability stochastic finite element analysis is still in the research and development into , this is exploratory research , reliability analysis of slope stability for the future have a certain reference value .