Windows 7 64 Bit For Windows systems also have dyn

In a large number of cases, we will function on diverse networks, repeatedly modify the IP deal with can be a particularly daunting thing. However, by default, Windows only enables you to select the network card in a fixed IP or DHCP server to dynamically accessibility in the IP. In actual truth, if we study carefully, allowing card has a dual identification, which is, if there is certainly DHCP server, it will obtain in the DHCP server, IP,Windows 7, or else, we use a specific IP, this will provide us good comfort.
one, Windows XP
If you are utilizing Windows XP, is somewhat simple: double-click the card, including Along with the window opens once more, choose




then click on , subnet mask, default gateway, chosen DNS server address, such as 192.168.0.a hundred,255.255.255.0,192.168.0.one,202.102.13.141 , and so forth. (Figure two). Thus, when we found a personal computer there is DHCP, it'll receive through the DHCP server IP deal with. Or else you are going to use our set of fixed IP, subnet mask, default gateway, preferred DNS server address, as indicated in the 192.168.0.two and so on, fairly hassle-free.





Unfortunately,Windows 7 64 Bit, Windows XP does not enable us to set up multiple fixed IP.
Second, Windows 98/2000
Should you be utilizing Windows 2000, obtained a very first DHCP server computer network, press Win + R, enter cmd , and then enter ipconfig, get the existing network card IP, to facilitate the back of identification (see Figure three).





Subsequent, press Win + R input regedt32, after which navigate to [HKEY_LOCAL_MACHINE System CurrentControlSet Services Tcpip Parameters Interfaces], then you could see,Windows 7 Professional, including demonstrated in the crucial, click the correct window following viewing DhcpIPAddress worth, if worth is above the values ​​in Figure 3, then it really is our IP handle to be added the network card (Figure four).





get this card,Microsoft Office Professional 2010, double-click the right window with the IPAddress entry inside the open window can add IP tackle. In the event you desire to include much more than 1, you can actually line a, inside the center separated by carriage returns, for example 192.168.1.181 (Figure 5). Then double-click the correct aspect from the window SubnetMask item, include the subnet mask in the open window, the IP deal with as well as the mask correspond towards the above, if you will find multiple, you may also include several lines (Figure 6). Similarly, double-click DefaultGateway item, add the subnet mask in the Open window,Office Professional 2010, if you'll find multiple, but additionally 1 per line (Figure 7).









done, near the
We are able to open the .)





ultimate note, in case you are employing Windows 98, you possibly can enter regedit Commence In spite of this, the Windows 98 network elements is weak, and in most cases could not be prosperous. Of course, I suggest that you upgrade to Windows XP.