PS tutorials ( individual well- mobilize , you can

1. sketched with a pen in the back of a wing fashion,
2. in the present working catalogue into the route 1,Asics Women's Whizzer Lo, double-click the go path.
3. the path into a selection (Alt + Enter), copy the layer, Feather 3 pixels,
4. filled with white, select the appropriate intensity of use of the smudge tool, the appropriate edge of the painting.
5. Duplicate the layer and fill different colors, combined with differences between layers 1 can regulate the transparency of the Oh layer properties,
6. in agreement with the previous method of product of the second wing, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. Create a new layer draw a circuitous selection, using the brush circle in the constituency, adjust the appropriate degree of transparency,
8. Duplicate the background layer paste into the new Alpha channel, in appending to other places outdoor the top left corner filled with black, using Filter - Blur - Radial Blur: number 90, mist method: zoom,
9. select Alpha channel (the channel on hold Ctrl), in Fig. floor area a new layer, fill light yellow,
10. with a pen to generate the beam path, the path into a selection, yellow and white gradient fill color,
11. amenable transparency, light rub with the eraser at the bottom, is light becomes natural,
12. people who sketch with a pen in the light path, the path into a selection, the edges of strokes with a painting, adjusting transparency, combined with the eraser and spot tool will fulfill better results and cost Several halo effect will be better


1. to find a fold of the background, will need to produce photo haul the background layer, resize and harvesting, border and background to the match,
2 adjustments - hue saturation, the whole map: -35 saturation, brightness +10,
3. adjustment layers into a soft mode, the effect of the antique photos out,
4. hue saturation the whole map: 0, -80,0
5. Duplicate the layer, hue saturation - color: 340,24,0
6. create a new layer on altitude, fill it with black,
7. Filter - Noise - Add Noise, increase the old sense, the number of 25%, Gaussian,
8. Blending Mode to Multiply,
9. Image - Adjustments - RP,
10. to remove the frame of variegated, with the rectangular culling tool select interior side of the siteline, DEL opener to cancel the outline part of the variegated,
11. clashes with the eraser tool around the variegated character


1. Duplicate the layer and into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool, the characters and filled with white flowers ,
3.Ctrl + click on the red copy to make it into a constituency, remove red copy, return to the Layers plate,Asics Shoes sale,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers Cutout complete,
5. Method One: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation coloring, New Hue Saturation adjustment layer , coloring the previous tick, Hue = 345, Saturation = 60, Lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: the new color balance layer, the middle tone - color rank: +100, -54, -20 / +100, -35, +43
shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21 , -23, -5. Magenta: -100, -45, +32, -1
8. gradient maps use the new Gradient Map 1, layer to color


1. Open the original image, duplicate the layer, fill pure black, overlay mode.
2. New Hue Saturation layer: saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, gloss 0, the material 69, 0 exposure, the environment 8,
6. stamp, plus text-decoration


1. Duplicate the layer, Filter - Blur - Radial Blur: number 71, fuzzy methods - scaling, quality - good,
2. to establish a template, given rise to motorcar, then tarnish the dynamic cycle clashes,
3. Levels - optional colors. Plus material, performance the whole air, with inferior changes Dodge made, the main diameter of 5, the hardness of the minimum


1. In RAW to adjust the brightness, contrast, after adjustment for the arranging the basis,
2. combine the sky material, simple transparency, make the sky into the layer,
3. New Adjustment Layer, Color - navel Color: +20, +6, +7, -4, total, a little water color uniform,
4. filled with yellow color, opacity 54%, dark blue fill color, opacity 61%, filling deep lavender, opacity 76%,
5. fine-tuning, high light and middle tone selection method and the resulting mask, high-light selection method: measurement - Source 1: Layers merge layers, gray channel, the source 2: Layers merge layers, gray channel, Multiply blend, opacity 100 %.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply mixture, opacity 100%.
7.RGB channel to get the mask, with curve adjustment, high light adjustment: Black wire grid on the left in the middle of the penultimate line, blue line to the hack point, midtone adjustment: up to adjust some,
8. reflected light disguise, lasso select constituency, emergence, overall brighten,
9. ship debris to reduce saturation, Saturation: -36,
10. sharpening overall


1. Open to copy the picture layer, Ctrl + Alt + ~, to be selection, emergence 3-5. curve brightens, about 18,0
2. Adjust levels: 25,1,20 , 245. mask clashes and details of some of the main characters
3. stamp above the temperaments to brighten the edge of the sharpening modified dermabrasion.
4. on the back layer for color balance, midtones: -12, -10, -13 High light: +8,0, -19.
5. back layer, into the LAB mode,
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%,
7. in the new layer applied on the image, layer: merge layers, soft mode, transparency, 100%,
8. adjustment layer, the lightness channel curve adjustment, 5,0
9. the image LAB color hue saturation adjustment, full figure: 0, +10,0. Yellow: 0, +35,0 Green: 0, +15,0. Red: 0, -20,0. Blue: +10, +30,0.
10. into Levels: 20,1.20 , 245. adjustment of the lightness channel, a gradient in the mask with a round out at the chief characters, and then brush clashes details.
11. stamped return RGB color, color options obtainable for the image, the red channel: 0,0,0, -30 given rise to the petals on the mask,
12. stamp, the new blank layer, increase watering effect with white brush, pen pressure. 100% hardness, spacing +54%


1. Duplicate the layer, soft mode, to optimize the use of soft light on the layer
2.Ctrl + U adjust hue saturation, with a fodder The leaves sponge the color, the hue change has reached the purpose of changing seasons, we absence the consciousness of winter, to detect the leaves of hue, brightness will be adjusted to the brightest.
3. Note lightness tolerance slider beneath the details of which tin be elected constituencies reduced saturation, hue can also be secondhand to improve sunlight, color scope is secondhand here, close the copy the wafer with the backdrop membrane to the color scope.
4. constituencies returned copy layer selected, emergence, for the selected part of the saturation of 0,
5. Snow is feeling the figures in the anti-choice, you can use the color range, you can also use hue saturation, and eventually add contrast, erase out some clothes.
6. some of the snow a bit stiff on the snow to be a fuzzy overlay, with the contrast of the copy layer selected, change the overlay mode, in contrast to copy the layer below,
7. overall rate of a contrast with given heave to a great brush perspective about the relationship, no including figures, giving details of the sleet.


1. Duplicate the layer and adjust the brightness, contrast, Merge Down,
2. into LAB mode, select the image using an image, to reckon,
3. the layer mode to color, back layer,
4. into the RGB channel, blue channel will be filled with black, to extract the green channel selection, will fill the selection with white,
5. Hue Saturation, Red: +20, + 1,0. cyan: -7, +26,0 Other data without moving the layer mode to color,
6. into the RGB outlet, select the green aisle selection, anti-choice, adjustment layer color balance, prefer the middle tone, value: -10, -6, +16. shadow: +4, +5, -2 High light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel selection, copy, paste back to RGB mode, layer mode to color, select the adjustment layer curve, the red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue channel: 55,62.
8. The layer mode to color, copy the layer, copy the chart layer, layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, the middle tone: -6,Asics Women's Mini Cooper,0, +3 shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2 High light: -19, -26, -40.
12. Plus the speedy effect.


1. establish Hue Saturation adjustment layer, Saturation -49,
2. the establishment of an optional color layer, red: -49,0, +7, -41. yellow : 0,0,0, -23
3. the establishment of the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26, white: 0,0, +46,0. Intermediate color: 0,0, -6,0.
5. Colors. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, clamor rebate,Asics Rotation 77, sharpening, drawing and uncomplicated to use tool to repair the knee close blot,
7. and invisible corners, production a heart-shaped selection, emergence, with bends to brighten.


1. copy the layer into a Smart Filter, you can filter for the purpose of effect of adjustment
2. filter - render - lighting effects, entire light, negative 17, Matte - 25, 100 plastic effect, exposure less than 32, negative 28,
3. New optional color correction layer, red: -100, -3,03,0. Yellow: -59, -6, -23, + 1 Green: +9, +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Halftones: +16, -18, -18, -3. Black: 0,0,0, +28


1. tweak the color cast, adjusting a rowdy tone, establish Levels adjustment layer Levels full channel: 0,1.35,255. Levels Red Channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. The establishment of the Hue / Saturation adjustment layer to reduce the original image's saturation, Full Figure saturation -30
3. a Photo Filter adjustment layer, the first step in the blue has bring an end to ..., this step is to deep yellow with a concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, hold down the ctrl-point red channel, get the selection back to the photo mask in the filter filled with black.
4. the establishment of an optional color adjustment layer, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. To brighten some of the windows, set up the Hue / Saturation adjustment layer to in other parts of the window wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, the characters and the circling environment to discriminate, set in the mask after using large soft black brush to figure for the megalopolis angle wipe it. Levels +20, +20, +40, select midtones
7. Establish Levels adjustment layer, 1st black and sunny areas broadly divided out, black and white in the mask using the gradient tool pull from the upper right corner to the lower left corner of the black and white gradient to the right at present. Full Channel 0,0.80,255
8. Plus light, use the , the upper left corner a bit dark, so add a mask to wipe out the upper left corner. Point of light, strength: 28, Focus 52, -100 gloss, material 100, exposure 17, the environment 32
9. New seal layer to enhance the look light and dark contrast, the establishment of the Levels adjustment layer in the mask in pull the gradient tool with black and white, black and white from top left to bottom right corner of the gradient, the light is entirely dim the upper right part of the mask with a white brush in rubbing out, and then figure out from the mask in the brush. Levels all channels. Levels all channels: 0,0.80,255
10. Sharpening, a little dermabrasion, add the word to complete.


1. new gray overcoat, with a curve to adjust brightness, 152,124
2. cutout eyes and jaws, to be accented,
3. dilute the overall saturation, saturation degrees -56
4. Colors with a Color Overlay to the whole tendency,
5. superposition of two layers of hidden hue and color, open the Channels palette, copy the R channel,
6. a new layer paste, and use filters color mode, adjust the transparency


1. open the original image, copy the layer, the image - adjustments - desaturate
2. filter - Artistic Effects - Plastic packaging, along to the original image to reduce transparency
3 to adjust the black class color scale,Asics Olympos, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer of black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5. to get in front of the high-light selection to adjust the curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, mushroom, or almost one suitable migrate color, brightness +4, contrast +7


1. open the original image, copy the layer, the image - adjustments - desaturate
2. filter - Artistic Effects - Plastic packaging, according to the original Figure reduce transparency
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer of black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5. to obtain in front of the high-light selection to adjust the curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase , or about the appropriate tone color, brightness +4, contrast +7


1. Select the blue channel RGB layer blend mode
2. Channel Mixer, retard the
3. dermabrasion, body beautification characters.
4. to give folk the skin and clothes with parameter default; use later achieve namely blue, yet likewise use the
6. to effect step 6 mixed-mode to
8 ..
9. fine-tune what the characters face color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The


1. establish a new layer, fill light yellow, overlay mode, the amount 247,240,197
2. copy just the yellow layer, Linear Burn mode, the mask clashes yellow car, shirk car color is also yellow,
3. adjust brightness, contrast, to highlight some of the color and exposure of natural subject, brightness -20, contrast +64, New Saturation adjustment layer, saturation -31. to make sure the The final brightness of the daylight, high light color and detail at the subject, the dark can be ignored,
4. Duplicate the background layer adjust eclipse highlight to shadow elaborate is the best area to bottom, shadow: the number 100, color length 33, radius of 102, high light: the number 0, hue width 50, radius 30, adjustments: color alteration, +20, 0 midtone contrast, the construction of black 0.01%, the construction of White 0.01%
5. Duplicate the background layer to adjust the sky brightness, with The layers make up the sky over the absence of exposure,
6.-tuning the details, to wipe the sky cables, repair Clone brush will do,
7. Flatten Image, fine-tuning the details, sharpen


1. deducted figure, adjust the photos, pay attention to color, contrast and over, this picture does not light up the legs in place need to be adjusted
2. adjust skin color, clothes color, mainly used to adjust the layer , then add the background material, reflection, etc., pay attention to little feet down the stretch distortion is used Free Transform to adjust drop
3. in the legs increase high-gloss, high gloss with a pen profile the position, fill it with white Gaussian --- --- fuzzy reduce transparency, you can also fill the new 50% gray layer of soft --- --- model with the Dodge tool to draw, numerous roads to Rome, you can lightly reach the destination
4 . matter, the text with what the final sharpening can


1. the photo to open, to find some form similar to the castle.
2. will be subtracted from the house and into a new layer. You can use the Polygon Lasso tool to select housing, and through a relatively soft eraser tool to delete the background.
3. immediately need a new background, from the material library to elect a
4. the sky into the behind of the house (house into the sky layer under the layer), and add a little perspective perversion effects of the sky to increase the depth of the background.
5. observe the edge of the house, where there are still some left in the native color of the sky on.
6. with the wizardry rod select the regional housing layer space, then do Select> Modify> Expand directive to expand the range of options, enter an appropriate value of the range of options to comprise the need for color correction house edge. Executive Image> Adjust> Hue / Saturation directive to adjust the color of the edge of the dome with the same color.
7. persist to use the Hue / Saturation to adjust the housing and the color of the sky, so namely they can coordinate to convergence.
8. will must remove the palm trees afterward to the house, with the Clone Stamp tool to copy the tile to draw out the house and second floor between the parts.
9. add lightning to add stress to the shade. No pluming effect using the brush to draw a lock of lightning, to a new layer, add a flicker effect. Then use the avoid tool highlighting the roots of lightning smokes.
10. using hand-drawn pictures approximately the house or add some die tree, memorize to adjust the color and brightness.
11. To make the house see more worn, drawn on the roof of a chasm.
12. to continue to add harm effects. Broken beams and aqueduct, the roof and damage distinct glass. After the break entities, to use Clone Stamp tool to fill the place vacated
13. Add some stains. First, the skylights, with an abnormal brush to add some variegated cup. Then change the layer blending mode stain to match the cup can be a agreeable merge. The tutorial I used brightness patterns.
14. the whole house to reiterate the same steps, use a deeper color and layer blending mode set to overlay mode. Attention to seams and edges, this place is the maximum prone to smudges.
15. portico detail amplified.

1. into the channel panel, then use the transparency of 50%
channel Green - Mixed Multiply,Asics Women's Onitsuka Mexico 66, Opacity 20%
channel red - mixed dark, opacity 100%
2. Adjustments - Color Balance - High Light - Levels: -8 +13, +11
3. blue channel during the time the applying image layer: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, shake a red channel at the top right little,
blue channel all channels 6,0 4,15
5. copy a layer copy of the out of the blue channel of action again, mixed Multiply, Opacity 50%
6. Finally to do is stand out, and with the eraser, given rise to some people, disburse care to the appropriate lower transparency.


1, this effect can be instantly transferred with a curve out over the whole channel is about 1 / 4 grid,
-105.125 green channel, blue channel 151.254
2. with lens correction additional black border. add noise, which Vignette - the number of -28 (dark), focus +5,
3. with the brush tool on the Internet under a scratch of pen on it and then mingle the layers
about painting 4 Add Noise, quantity -2.45
5. to do a side


1. Duplicate the layer blend mode to Screen,
2. coating 2 reverse mask clashes eyes
3. stamp (alt + ctrl + shift + E)
4. channel medleys, select the color, red +54, Green +54, Blue +32
6. mixed mode - are stacked
7. adjustment of stamp layer, the image - adjustment - Shadow / Highlight - Shadow: 50,50,144
tall light: 0,50,30
middle tone: 20,0
0.01,0.01
8. once again stamped
9. wipe the right impudence with the seal of the sun
10. with the Dodge tool - the range of high light intensity of 50%, struck a reflective eye, just rub the eye dark,
11. once anew ticketed Filter - Other - High compare, parameters 80
12. change the layer mode to high-contrast soft, enhance contrast,
13. use your favorite The method of sharpening
14. for a long period less saturated hue of ruddy, alternatively additional fine-tuning attempt

1. Duplicate the layer, brighten the entire, the curve at the top right,
2. with selection tool proboscis stud surround, and then curves to brighten, to highlight the proboscis stud
3. color balance - high gloss - Levels: +8,0, -22
middle tone - Levels: -10, + 29, +27
shadow - Levels: -2, -3, +14
4, Color - Red: 0, +1, +23, -29
Color - Yellow: 0,0, +4, +28
5. adjust the affected skin, a little pressure dark color
6. with a curve to highlight the texture of the fish tank pressure dark, black is the mask, the mask used with Adjustment generally good change that
7. brighten the overall color, the upper right curve,
8. Finally, the modification of the lips,
9. add text



1 use the
2. use the ctrl + I RP operation:
3. Levels using ctrl + L to adjust the value of [145,1.5,160]
4. turn into a common layer, after a new vacant layer and fill it with black on the bottom.
5. using ctrl + T to free alter, the use of perspective.
6. duplicate this layer and use the free transform the vertical flip.
7. aline the 2 layers, and connect together.
8. Use Free Transform to adjust the zoom function of height.
9. using color filter