Office 2007 For Windows systems also have dynamic

In a great number of cases, we'll work on various networks, repeatedly modify the IP address is actually a very daunting factor. Nevertheless, by default, Windows only allows you to choose the network card in a fixed IP or DHCP server to dynamically access from the IP. In real fact, if we research carefully, allowing card includes a dual identity, which is, if there's DHCP server,Office 2007 Download, it's going to obtain from your DHCP server, IP, otherwise,Office 2010 Download, we use a particular IP, this may carry us wonderful convenience.
1, Windows XP
Should you be working with Windows XP, is fairly uncomplicated: double-click the card, for instance And also the window opens once more, pick




then click on , subnet mask, default gateway, desired DNS server address, including 192.168.0.a hundred,Microsoft Office 2010 Key,255.255.255.0,192.168.0.1,202.102.13.141, and so on. (Figure 2). Therefore, when we discovered a laptop or computer there is certainly DHCP, it is going to receive from the DHCP server IP tackle. Or else you'll use our set of fixed IP,Windows 7 64 Bit, subnet mask, default gateway, preferred DNS server handle, as indicated in the 192.168.0.2 etc, pretty hassle-free.





Unfortunately,Office 2007, Windows XP doesn't enable us to set up numerous fixed IP.
Second, Windows 98/2000
In case you are using Windows 2000, obtained a 1st DHCP server laptop or computer network, press Win + R, enter cmd , and then enter ipconfig, get the current network card IP, to facilitate the back of identification (see Figure 3).





Up coming, press Win + R input regedt32, and then navigate to [HKEY_LOCAL_MACHINE Method CurrentControlSet Providers Tcpip Parameters Interfaces], then you could see, like shown in the important, click the proper window after viewing DhcpIPAddress worth, if worth is over the values ​​in Figure three, then it is our IP deal with to be added the network card (Figure four).





uncover this card, double-click the right window with the IPAddress entry within the open window can add IP address. For those who wish to add even more than one, it is easy to line a, within the middle separated by carriage returns, which include 192.168.1.181 (Figure 5). Then double-click the proper aspect of the window SubnetMask item, include the subnet mask within the open window, the IP deal with along with the mask correspond to the over, if you'll find several, you may also include multiple lines (Figure 6). Similarly, double-click DefaultGateway item, include the subnet mask in the Open window, if there are several, but also one per line (Figure 7).









accomplished, close the
We are able to open the .)





ultimate be aware, should you be using Windows 98, you could enter regedit Start On the other hand, the Windows 98 network components is weak, and in most circumstances may well not be profitable. Of course, I recommend that you upgrade to Windows XP.