Photoshop skills, Photoshop skills of the prestigi

transferred to leftover, after slowly learning
School basis
PS: Photoshop Skills 167 -
Daquan
classic Photoshop skills, if you are the level of the basic stage, familiar with the text and master, immediately advanced to intermediate level. Oh definitely not advertising. -
Common techniques
Daquan classic Photoshop capabilities, if you are the level of the basic stage, versed with the text and main, quickly progressive to intermediate level. Oh definitely not advertising. -
-
1. quickly open the document -
Double-click the Photoshop background vacant (the default is gray display area) to open the selected file in the browser window. -
2. free to replace the canvas color -
Select the Paint Bucket tool and hold down the Shift click on the brim of the canvas, you can set the canvas background color for the currently selected foreground color. If you want to revert to the default color, set the foreground color to 25% gray (R192, G192, B192) Shift-Click again to the canvas brim. -
3. selection tool shortcut keys -
can shortcut keys to quickly select a tool in the toolbox, each tool shortcut keys are the letters: -
box-M mobile-V Lasso-L magic wand-W-
gun-J-B brush pencil-N rubber stamp-S-
history eraser pen-Y-E Fuzzy-R Dodge-O-
Pen-P text-T-U metric gradient-G-
straw bucket-K-H-I handle zoom-Z-
default foreground and background colors-D switch foreground and background color-X-
amend mode to switch the display mode switch-Q-F-
In adding, whether we hold the Alt key and then press the Tools icon appears, press and hold the Shift key and repeat or organic keyboard shortcuts you can cycle via the hidden tools. -
4. to obtain accurate cursor -
press the Caps Lock key
brush and magnetic tools can make the cursor appear as accurate crosshair, and then a restore status quo ante. -
5. show / hide control panel -
Press Tab key to toggle to show or hide all of the control panel (including outfit), if you press Shift + Tab is the toolbox is not affected, only the control panel display or hide the other. -
6. Rapid Restore Defaults -
Some are not good at Photoshop
friends in order to adjust the tangles and turns actually satisfied with the results and base that the best is still the original default, which under the most baffling, really apologetic you did it! How to return to the default value of it? Try to gently pat on the Options tool bar icon, and then from the context menu select -
7. freedom to control the size -
zoom tool shortcut key for and to display full-screen view can be the case! If you want to use the zoom tool automatically adjusted according to the size of the picture window, the properties in the zoom tool bar, click -
8. using non-Hand Tool (hand tool), hold down the space bar can be converted to a hand tool, you can shake the visible range of the picture window. Tool in the hand can double-click on the image to exhibit the most appropriate window size, double-click on the zoom tool can display the image at 1:1 percentage. -
9. in the use Erase Tool (Eraser tool), prop down the Alt key to alternate to the eraser function to return to disc the steps specified in the state. -
10. Use Smudge Tool (finger tool), hold down the Alt key can be simply applied to become coated with the foreground color. -
11. To move use the Type Mask Tool (Type Mask tool) to play the font selection, it can be switched into the Quick Mask mode (using the shortcut keys Q switching), and then move, as long as you switch after back to standard mode. -
12. hold down the Alt key, use the Rubber Stamp Tool (rubber stamp tool) to open the image at any window click of the mouse, you can set the window sampling position, but will not change the athletic window. -
13. in the use Move Tool (move tool), the signal keys on the keyboard can directly move the layer distance of 1 pixel on the image, if you hold down the Shift key first, then press the signal keys Zeyi each distance of 10 pixel moving images. Press the Alt key while dragging the selection will move the copy of the constituency. -
14. use the attractive lasso tool or the magnetic pen tool, click -
15. calculation tool is quite handy in measuring distances (primarily in the crooked), you can also use it to amount angles (like a protractor.) Visible in the information panel below the premise of measurement tool click and drag select a line, hold down the Alt key to the node from the first line again and again out on the second line, so that the angle between two lines and the length of the line displayed in the message panel. Measuring tool drag to move the measuring line (you can also move the measuring line merely a unattached knot), the other to measure the line onto the canvas, it can be erased. -
16. use the painting tools, such as (such as brushes, to the pen, etc.), hold down the Shift key click the mouse, can be a straight line joining the 2 click points. -
17. hold down the Alt key with the eyedropper tool to select the color to define the current background color. By combining the color sampler tool (Shift + I) and the information panel to monitor the color change of the current picture. Change the color values ​​are displayed before and after the information panel afterward to the sampling point number. Through information pop-up menu on the panel to define the color pattern of sampling points. To add a new sampling point only color on the canvas where promiscuous sampling tool and then click and hold down the Alt key and click to remove the sampling points. But a chart can only be placed four color sampling points. When the dialog box in Photoshop (for example: Levels directive, curve command, etc.) pops up, to add a new sampling point must hold down the Shift key and click, hold down Alt + Shift click on a sampling point can be subtracted. -
18. We all must have used cutting tools, in which circumstance you may have encountered; adjust the hack in your grasp, and cutting the image frame and relatively close to the frame when the mow automatically spliced to the frame the edge of the image, so that you can not accurately crop the image. But at the peak of the adjustment took time to cut the siteline -
-
-
replication techniques -
19. Hold down Ctrl + Alt key and drag the mouse to copy the contents of the current layer or selection. -
20. If you have recently copied a picture exists in the clipboard, Photoshop in the new file (Ctrl + N) when the picture will be the size of the clipboard as a new map of the default size. The use of this feature to skip the last set, in the open while holding down the Alt key (Ctrl + Alt + N). -
21. If you create a new work, need to open the picture with a piece of the same size, resolution, format. Select the
22. in the use of Free Transform (Ctrl + T), hold down the Alt key (Ctrl + Alt + T) to first copy the original layer (in the current constituency) after the copy layer to transform; Ctrl + Shift + T to repeat the last transformation, Ctrl + Alt + Shift + T to copy the original image and then fulfil a transformation. -
23. use (cut) paste the new layer command will put their original place, but by copying (cut) and then paste, it will stick to the image (or selection) of the center. -
24. To not want to instantly copy the image appoint dialog box appears, you can first hold down the Alt key, then the implementation of -
25. Photoshop the clipboard is serviceable, but you also want to use the Windows system clipboard directly, directly from the screen image on the interception. Yes, press Ctrl + K, in the pop-up panel will be -
26. in Photoshop to effect a normal copy -
when act layout of definite factors ambition often be placed regularly in quest of a form of beauty, within the Photoshop shortcut key through a medley of 4 can easily reach. -
(1) circle you want to copy the selected objects; -
(2) Press Ctrl + J to produce a drifting Layer; -
(3) by circulation and move to the appropriate location, confirm; -
(4) can immediately hold down the Ctrl + Alt + Shift Continuous press (Just hold down the Ctrl + Shift is just a regular mobile) -
27. When we choose to copy the file object, use the Edit menu to copy the command. Copy time you may feel no trouble, but multiple copies, a very inconvenient time for a visit. Then you can first use the selection tool selected thing, and then click the move tool, then hold down the When the cursor changes to a black and white overlap of the two headed arrow, drag the mouse to the desired location. To copy numerous times, just repeat the line relaxation of the mouse. -
28. can Marquee Tool or the Lasso tool to drag from one document to another constituency on. -
29. To establish the current history state or snapshot of a copy document can be: -
(1) Click the
(2) from the History panel menu, select a new document; -
(3) Drag the new state (or snapshot) to
(4) Right-click on the desired state (or snapshot) from the pop-up menu, select a new file the history of the state status of the current picture of a historical window onto another picture can change the intention of image content. Alt-click on any of the history of the state (in addition to the current, the most recent state) can copy it. The state after the copy becomes the current (most recent) state. Alt-drag action steps you can copy it to another action. -
selection techniques -
30. the selected area or layer drag from one document to another, hold down the Shift key to make it centered on the purpose of the document. If the source document and the purpose of the document size (size) the same as the element creature dragged is placed in the same location where the source document (prefer than on the center of the canvas.) If the purpose of the document contains the constituency, the dragged element will be placed in the center of the constituency. -
31. in the action palette, click the triangle button in the upper right turn, from the pop-up menu, select load actions into PhotoshopGoodiesActions catalogue, under which a button, specifications, orders, graphics, text effects, texture, action set six skeletons,Supra Skytop III Shoes, including a lot of practical things yo! In addition, the directory also has a ACTIONS.PDF file that you can open the Adobe Acrobat software, which details the use of these actions and generate results. -
32. click on the toolbar of the brush type tool, the properties shown in the retinue section, click the small triangle to the right of the brush tab in the pop-up menu, then click the small arrow to select Photoshop Brushes directory to the folder, select *. abr. There had so many lovely things. -
33. painted a beauteous markings, would like to re-use in the works? Easy to handle, with the lasso tool selected it, the pop-up menu in the Brushes select
34. If you want to choose between the two parts of selected area, select any of the existing area next to the Alt key while holding down the Shift and drag, drawing the second selection area (cross appears next to the mouse a add, that overlap the region will be retained.) -
35. in the selection area to clear a square or circular, the premier increase in any selected area, and then in the selected area, press Alt key to drag a rectangular or elliptical disguise tool. And then release the Alt key, press and hold the Shift key, tow it to your satisfaction. And then release the mouse clasp and release the 1st Shift key. -
36. outwards from the heart remove a selected area, a choice in any area, press the Alt key to drag a rectangular or elliptical mask tool, and then release the Alt key and then hold down the Alt key again, and eventually release Release the mouse button and then Alt key. -
37. in Quick Mask mode, switch to quickly select a mask regional or local adoptions, first hold down the Alt key to move the cursor quickly mask mode icon, click the mouse on it. -
38. When using the Marquee tool, hold down the Shift key to draw a square and a faultless circle of constituencies; hold Alt key constituencies from the beginning point for the center outlined. -
39. use the -
40. constituencies in the use of lasso tool to profile the time you can press the Alt key lasso tool and the Polygonal Lasso tool to switch between. Constituencies outlined can be moved when holding down the space bar is outlined in the constituency. -

1. Duplicate the layer blend mode to Screen,
2. Coated 2 eyes mask reverse clashes
3. back (alt + ctrl + shift + E)
4 . channel fusion, select the color, red +54, Green +54, Blue +32
6. Mixed Mode - are stacked
7. on the back layer to adjust the image - adjustments - Shadow / Highlight - Shadow: 50,50,144 Highlight: 0,50,30 Midtones: 20,0 0.01,0.01
8. again back
9. wipe away the right insolence with the stamp of the sun
10. with the Dodge tool - the range of high light intensity of 50%, given rise to the eye reflection, only rub the eye black,
11. again stamped Filter - Other - High contrast, parameter 80
12 . to change the high contrast that layer Mode to Soft Light, enhance contrast,
13. use your preference means of sharpening
14. for a long time fewer saturated red hue, or other fine-tuning to try


1, select the material map.
2, create a new canvas, filled with a black background, and characters materials onto the canvas, use the eraser tool to erase parts of the face outside.
3, create a new transparent canvas (20 x 20px), the foreground color to white, use the pencil tool on the canvas 1px left and lower side stroke.
4, Edit>> Transform>> distortion, press the map to adjust the grid layer nodes.
5, the layer opacity set to 20%. Double-click the grid layer to open layer style window, select the external flicker, blending mode to
6, create a new layer, use Pen tool selected a number of boxes along the grid, and fill it with black.
7, hold down the Ctrl key and click the black box access to constituency level, select the portrait layer, cut and paste (paste layer named after the After the move to lessen the point of its location below.
8, select the debris layer, hold down the Alt key while clicking the right keyboard arrow key (point 9), by a similar three-dimensional effect. Appears in the Layers Panel at this time to look 10 pieces layer, in addition to other debris outside the top layer of merger and the merged layer named Double-click side of the layer to open layer style window, select the Gradient Overlay, the Opacity to 80%, angle of 180, use # 000000 to # D58761 gradient, and other attributes take default values.
9, using the brush tool to add some texture for the side effects.
10, repeat Step 6 - Step 9, win the following results.
11, will mix all the layers of black carton, double-click to open the Layer Style window, select Bevel and Emboss, the neatness of . High-light mode to
shadow mode
12,Supra Muska Skytop Shoes, build a fashionable layer underneath the debris layer, use brush to add cloud effects smoke. Choose debris layer, the use of soft black brush draw aboard canvas on the right angle to obtain as disappear effects.
13, in the figures to create a new layer above the layer, again using the pen tool to a number of randomly selected box and fill it with black. The layer blending mode set to
14, the same operation and step 13, equitable fill color into white.
15, select the character layer, Filter>> fuzzy>> surface blur, radius of 5px, threshold 15. Created in all the layers above the adjustment layer, layer>> Create Adjustment Layer>> Levels, property to 10,1.25,244.
16, in order to get the feeling of chilly, you can add a barcode tattoo on his arm.

1. New gray coating, with a curve to adjust the brightness, 152,124
2. cutout eyes and jaws, to be stressed,
3. dwindle the overall saturation, saturation -56
4. with a color overlay to the overall color of the proclivity,
5. hide the hue and color overlay layers, and open access panel, copy the R channel,
6. Create a new layer glue and adjust the transparency with a color filter pattern


1. Duplicate the layer, the new channel mixed adjustment layer, gray channels, red +64%, Green 2%, 10% blue, monochrome
2. New solid mixed layer,Supra Bullet Shoes, select 575 046 colors, mixed-mode color,
3. new curves adjustment layer, ① - Input 68, output 32, ② - input 114, output 68, ③ - input 208, output 197,
4. New One solid layer, select 443B25 color, blend mode to color, press Alt-click mask,
5.Ctrl + D to restore the default background color, Ctrl + Delete to fill the black mask the background color,
6. changing the screen, in the transition to high light and the dark part of the tone, in order to enrich the color, with a brush inserted in the mask
that absence some color, 300 pixels, opacity 10%, stream 100%
7. preparation and design of the font
8. To make temperaments and have a color screen reverberate, to the point of lip luster on the lip of people, create a new layer, select the Linear Dodge Blend Mode, additional 90753D color, select the fitting brush on lip luster, loose point pen, pixel 39,
9. exaggeration, the lip gloss reflective paint parts, inspect and continuous adjustment, drawing a see after the overall good lip gloss, this time a picture has been echoed, color transform wealthy, not overwhelming, just send out a product,
10. If the product directly with the body in the model, and people tune in to lust after, or, in the mask color to the product directly to the plug out of the product can


1. Open the file, copy a layer copy of the
2. Select the copy layer by free alter to change the shortcut keys ctrl + t to make the characters more slim face shape
3. by Merge Layers (ctrl + e), the use of cutting tools so that the screen contains the new essay, cut off the surplus part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80. white -0,0,0, -50. intermediate colors -0, -5, -5, -5
5. by curve (ctrl + m) adjust overall color, RGB full channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjust - Color Balance (ctrl + b), the shadow -10,0, +15. Highlight - 10,0, +2.
7. With a stamp tool to evenly cover the skin nigh the mouth,
8. With a pen to circle dark bags under the eyes and face, the emergence of 60, the curve to lighten the constituency Dodge bags under the eyes and reduce the wording of facial muscles do not relax,
9. continued emergence of 60 constituencies, the curve lightening, the face, full point, output 146, input 113.
10. the high part of the circle of light out, feathering 60
11. curve of lightening, the face, full point, output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin, the lasso tool, the emergence 5, copy the layer, the Duplicate the layer move down, in order to achieve eyebrow shaping effect, stamp eyebrow shaping, this must be very careful
13. began to adjust the eyes, the Commission put out the eye part of the circle, copy layer
14. pen to surround the do eye shadow region, copy a layer, the curve of oppression dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part of the Hue and Saturation: 0, -40,0
17. Circle the details of the basis of the upper eyelid eyelashes Department before the corner of lower eyelid 1 / 3, press DELETE key to delete the selection, the exposed high light-bit,
18. delete some more eye shadow, plume 40
19. circle the details to the upper inner corner eyelid 1 / 2, press DELETE key to delete the selection, the exposed high light-bit
20. the eyes ring out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes after the curves adjustment layer of bright copy, pen brush back the first part of the left eye, showing some shadows
23. remove the pupil part
24. with eyes the color curve adjustment, so that the same
25. plus look high light
26. circle the lips, emergence 2, Curves lips high light, adjust the lips Color
27. adjust the nose Liang Gaoguang, adjust shadow highlights
28. with the optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction onward the hair drag, combined with lens fan, light 182,35 mm converge,
31. Finally, insert a flash in the appropriate brush complete


1. establish Hue Saturation adjustment layer, saturation -49,
2. to establish an optional color layer, red: -49,0, +7, -41. Yellow: 0,0,0 , -23
3. to establish the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26. White: 0,0, +46,0. Intermediate colors: 0,0, -6,0.
5. Optional color. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, noise reduction, sharpening, painting and easy to use tool to repair the knee approach The spot,
7. plus hidden corners, making a heart-shaped selection, emergence, with the curve provides bright.


1. Open the original image, duplicate the layer, filled with pure black, overlay mode.
2. New Hue and Saturation layers: Saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, lustrous 0, the material 69, 0, exposure, environment 8,
6. chop, add text elaboration


1. Duplicate Layer, Filter - Blur - Radial Blur: number 71, blur method - zoom, quality - good,
2. create templates, struck a car, then tarnish given mushroom to dynamic wheel ,
3. Levels - optional colors. Add material, rendering the whole atmosphere, the details of adjustments made with the Dodge, the main diameter of 5, the hardness of the minimum


1. slightly adjust color actors, adjusting a rough tone, establish Levels Adjustment Layer, Levels all channels: 0,1.35,255. Levels of red channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. To establish the Hue / Saturation adjustment layer reduces the saturation of original, Full Figure saturation -30
3. to create a Photo Filter adjustment layer, the first step in the blue has bring ... to an end with this step to deep yellow, the concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, hold down the ctrl points of red channel, get back to photos selection populate the black mask filter.
4. to create an optional layer of color adjustments, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,Women's Supra Vaider Shoes,0, +20, +20
5. The windows brighten the more, the establishment of the Hue / Saturation adjustment layer to part in the window and wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, to differentiate the characters and the surrounding surroundings, the set after the mask used in the large soft black brush to figure as the center angle rub a bit on it. Levels +20, +20, +40, select midtones


1. Create a new layer, fraught with yellow, overlay mode, mathematical 247,240,197
2. Copy just the yellow layer, Linear Burn mode, the mask given rise to the yellow car, avoid car color through yellow,
3. adjust brightness, contrast, high light color and exposure of part of the normal subject, brightness -20, contrast +64, the new adjustment layer saturation, saturation -31. to determine the ultimate brightness of the sunshine to high light at the color and detail prevail in the dark can be ignored,
4. Duplicate the background layer the shadow highlight correction, the best place to shadow detail as the found, shadow: the number 100, color width 33, radius of 102, high light: the number of 0, hue width 50, radius 30, to adjust: +20 color alteration, contrast correction among 0 and 0.01% of the construction of black, white construction 0.01%
5. Duplicate the background layer to adjust the sky brightness, with the layer to make up the sky over exposure deficiencies,
6. tuning the details, to wipe the sky wires, repair, Clone brush will do,
7. Flatten image, fine-tuning the details, sharpen


1. Open the image duplicate the layer, Ctrl + Alt + ~, by constituency, emergence 3-5. curve brightens, about 18,0
2. Adjust levels: 25,1,20,245. Mongolia version of the cardinal characters and the details given rise to some
3. stamp on the characters to brighten the edge of the sharpening modified dermabrasion
4. on the back layer for color balance, the middle notes: -12, -10, -13. high light: +8,0, -19.
5. back layer into LAB mode
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%
7. the application of the image on the new layer, layer: merge layers, soft mode, transparency, 100%,
8. adjustment layer to adjust the curve on the lightness channel, 5,0
9. on the LAB color image saturation, hue adjustment, full size: 0, +10,0. Yellow: 0, +35,0. Green: 0, +15,0. Red: 0, -20, 0. Blue: +10, +30,0.
10. into Levels: 20,1.20,245. on the lightness channel to adjust the gradient in the mask with a round out at the main characters, and then rub the brush out the details
11. stamped, return RGB color, the image is optional color options, red channel: 0,0,0, -30 given rise to the petals on the mask
12. stamp, the new blank layer, increase the watering effect with white brush, pen pressure. 100% hardness, spacing, +54%


1. get hold of handsome eyes point to increase the visual and appealing, copy eye out, change the eye color filter layer model, this effect is easier to be foreigners, easterns or preferably with an American pupil or another
2. brighten the face, prominent face, with the lasso tool to pitfall the face, after emergence provides shine, not too bright,
3. with the lasso tool out of the hair, face and pulled it does not matter, can then use the eraser wash, brighten after emergence
4. obliged the whole point of a unified look, the hair part of the eraser can erase a little bit,
5. covered by a new layer (Ctral + Alt + Shift + E), with a seal on the face of the mole-volt tools, puny rebate in the colorful color balance force, and increase the point of lustful, it looks white,
6. Create a new transparent layer, layer mode soft, with dark eye shadow eye liner at the bottom to add color to publish from the inside of the eye, from deep to shallow, layered with a soft brush highest
7. Create a new transparent layer, soft mode, draw a circle with a purple eye shadow as background, if the alarm of wrong results can often use vague adjust color, kas long aseven far
8. adjustment of the high-light areas of skin , add a new transparent layer, overlay mode, the color of the nose painted with the brush to find the root of most appropriate color photos and add highlights, the benefits that can amend the contrast to increase visual,
9. to do the whole adjustment, additional The new transparent layer, soft light mode to increase the area of ​​high light color, color change, in the forehead with dark red hair, addition there between, additional shading, saturation, red face not too high, nor too low, feel painted into the face looks like the real,
10. new transparent layer, soft light mode, the high class of light in the proboscis, add some highlight color, so namely the nose looks extra favor a deep profile, more challenges, able to obliterate his face sordid place out, alternatively have black places
11. new transparent layer, overlay mode, to the lip color, painted purple, transparency is 70%
12. new transparent layer, assured overlay mode, transparency 40% in the nose, forehead, face, where the increase in black and red, with the increase in the shadow of layering,
13. new transparent layer, overlay mode, the eye shadow to be of two layers, layer is a little light outside, inside should be dark purple, the best Gaussian muddled almost until evenly
14. new transparent layer, soft light mode to mushroom the black and purple, make this differentiation black, looks more ######y,
15. new transparent layer, overlay mode, including the corner of the eye to the nasal has to face place, people, drawing on the light between the two lips, dark red, to increase the level of a sense of contour and adjust the transparency of a good painting, it might be darker
16. side of the forehead and narrow face, deepen the color, overlay mode, the color is red lines,
17. plus to the lips, where the shadow below, or mouth looks counterfeit
18. with the same color cover face dirty place, with a straw next to the same color drawing, may cover part of the hair, for a painting can be.
19. new transparent layer, soft light mode, the green house under the eye shadow,
20. mouth with a dirty face, where the same courses with a fodder color, a new layer to make the place dirty,
21 . Create a new layer to Multiply mode, the transparency of 20%, painted black and ruddy make up,
22. facial hair is dark brown hair, black hair, which is a lighter gray color, and draw good the hair part,
23. a new layer and fill color to cover the forehead near to the skin, cotton looks so rough
24. face complementary color, looks more red, more compliment, more to attract far
25. new transparent layer, Multiply mode, the transparency of 50% in the forehead, brown, dark skin color press to enhance the contrast
26. new transparent layer, overlay mode, 50% transparency in painting cheeks orange, foreigners exaggerated makeup, the red point does not matter,
27. the adjustment of overall color, sharpness about


1. open the original file, according to their own sense of color adjustment through the adjustment of the film, and dermabrasion, dermabrasion value not too much, (Neat image plug-in)
2. a new layer, color FEE7D6, ( According to people of color to the movie set), layer mode to Overlay and 25%, 20% with a brush in the face and nape skin and light coating,
3. functions of the careful go, cutting out the mouth, the emergence Copy (Ctrl + J), with the smudge tool to smear on the lip, so that the skin becomes soft and smooth lips (not too much strength)
4. Create a new layer to the lips and face paint, the color is FDC1D6 , layer mode to color in the lips and face with a brush for painting the side,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the high-light some of the lip, with better tools, the range intermediate, 20% of exposure, contrast enhance lips,
6. a new layer, color 8E1A25, brush pixel is 3, draw the inside of the inside, and then draw 2 pixels outside the lip lines (high light Dodge mask some part of the line was built)
7. on the nose to circle the emergence, forgery, use painting tools to be moderate around the nose cultivated, and then use the Dodge tool range is a high light exposure of 20%, strengthening the next The high light some of the nose, and then use the color 422B2D, a 2 pixel brush to draw the outline of the nose (if the short lines to make up for using better tools for the next)
8. eclosion circle replication of the eye brows, eye brows with the smudge tool around the soft skin thinning, and then use the Dodge tool range is a high light exposure of 15%, strengthening the high-light parts under the eyes, with better tools the middle range and deepen the lines around the eyes,
9. coated tools used to apply some fine eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure 20% of the degree to strengthen the high-light part of the eyes, production eyes look brighter,
10. color 080,101, 3-pixel brush, draw the lashes portion (line Dodge tools to deepen the color depth can be secondhand to make up) can also be secondhand eyelash line paths and other ways triggered,
11. with smudge tool to apply the prettier eyebrow, his brow slightly darker color of the rough spots that smear back along the fade down, and then 2 pixels with a brush to draw eyebrows in the front eyebrow lines, the eyebrows more structured,
12. spot tool to select the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the texture of the hair, not too many force to apply the uniform,
13. hair brush applied partly to the normal interface, the (hair must be applied carefully)
14. Draw the hair texture to a new layer, layer mode to overlay, select the pencil pixels to 1 (the value resolved according to the size of character images), color, hair texture for the DFDFDF draw down smooth lines
15. horsetail some select brush tool, brush easily with a fork some of the paint along the texture, color, pattern layer above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% of flow, color is white, draw dynamic forehead hair,
17. clothes and pendants with the smudge tool applied some of the softer, and then select the Dodge tool with a range of high light , exposure 20%, clothes and necklaces to enhance some of the high-light
18. Synthesis, sharpen the picture as a entire, sharpening is 8,Supra Vaider Shoes, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)


1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and pearly constituencies, money becomes small eyes, invisible, back to the background layer,
5 . to get in front of the high-light selection adjustment curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or an appropriate adjustment to the color, brightness, +4, +7 contrast


1, open lotus photo, copy the background layer.
2, to adjust levels to increase color and black and white contrast. Levels: 15,1.0,200
3, after the implementation of opposite Gaussian blur, radius 1, then implementation of Filter - Brush Strokes - splashing. Radius of a spurt color, smoothness, 3
4, a new layer, set layer blend mode to color, with pink flowers painted brush to color.
5, then add some random text, stamped, completed.


1. into the channel panel, and then use the
Channel Green - Mixed Multiply, opacity 20%
channel red - mixed dark, opacity 100%
2. adjustments - color balance - high gloss - Levels: -8, +13, +11
3. blue channel during the first applying image, layers: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little bit, br> All channels 6,0 and blue channels 4,15
5. Copy a layer copy of the out of the blue channel of the operation again, mixed Multiply, opacity 50%
6. The last thing is prominent figures, and with the eraser, given rise to some people, pay attention to the appropriate lower transparency.


1. Copy a new layer
2. with a seal tool to repair acne off
3. to record a snapshot of the results of repair pox,
4. do a Gaussian mist, intensity, texture of skin evaporated dominate, the radius of 4.0
5. recorded a snapshot named Gaussian blur】 【
6. by acne】 【Amendment to make the image back to the time the state has just complete a pox, and point 【Gaussian blur 】 left small box, so that the small icon to switch over, which is immediately in order to use the History Brush as the target point
7. the history brush, using it requires smooth of face painting, pay attention to avert the outline lines and cilia, eyebrows, etc., you can use the [key and the] key to change the brush size at anyone time to modify some fine, if only carefully brush the bad, does not material, at all times you record in the history panel to the left of the icon points according to the acne】 【repair, and then painted, you can brush back and said the starting of the process is reversible
8. you can change the brush opacity to control the intensity of your painting, the brush 20, opacity 55%
9. After the effects wear smooth, very smooth, but not skin texture, but also the next step processing
10. recorded a snapshot for the smooth】 【mill, each period is completed, we are the best record, you can always work back.
11. continue to do so, Ctrl + A to a full election, again a Ctrl + C, copy under the aesthetic effect. Then, click the History panel acne】 【revised to make it back to pre-polished state
12.Ctrl + V to duplicate down the polished achieve of earlier release to a new level, and alteration the transparency of the that can be revealing some of the lower, opacity 70%
13. Click the lower, that is, not wear off that layer, to a much sharpening, number 140, radius 0.7,
14. This overlay, smooth skin without losing texture texture, skin polishing step is complete, and remember to retention the snapshot to complete】 【skin
15. pulled below the layer 1 icon, copy the new layer, set to

1. Select the blue channel
2. channel mixer, hook the
3. resurfacing, landscaping figure form.
4. to give people the skin and clothes with parameter default; use after the effect of blue, also need to use the
6. to the effect of step 6 are mixed mode to
8 ..
9. fine-tune the look or facial skin color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The


1. Duplicate the layer and adjust - to color,
2. curve adjustment, increase the brightness contrast, input 114,Kids' Supra TK Society, output 186
3. Duplicate Layer, Filter - Brush Strokes - the ink profile , stroke length of 5, 10, look intensity, light intensity of 10, falling into a soft light layer mode, adjust the opacity,
4. Filter - Gaussian Blur, Radius 2.0 pixels,
5. Filter - Brush Strokes - spray, spray radius of a color, smoothness, 3,
6. Add a light brown solid layer, Figure Cen enchanters as color, adjust opacity, not transparency, some as small as feasible,
7. point out a solid color layer and the layer in front of the eye to hide it, the new layer with the brush in the lanterns, trees, tiles, etc. with the appropriate color layer,
8. to restore hidden layers, change layer mode to overlay, along the effect to tune the details,
9. on the screen to fine-tune the overall effect until satisfactory results, not specific steps to alter


1. take a photo with a white edge image landscape plan, as do the white side of the edge spillovers
2. hue saturation: saturation +80, adjusting out the effect of Impressionism,
3. Editor - Define Pattern.
4. built white fill layer, 50% opacity, to build a transparent layer
5. pattern stamp tool, brush the main diameter of 200, the pen comes with wet medium brushes 45 election, mode regular, opacity 100% , retard in front of impressionist effect,
6. in a transparent layer pattern stamp painting, vision plays King strokes colossal and small details of the multi-hand strokes, adjusting the opacity of the top layer of the brush strokes outlook,
7. Copy Background layer to color filters - splash, 71% opacity, layer mode to Overlay
8. Filter - Texture - textured, opacity 100%,
9. percolate - misrepresent - the light diffusion 37%


1. in the RAW to adjust the brightness, contrast, etc., for laying the basis after the adjustments,
2. to connect the sky material, simple transparency, make the sky into the layer,
3. New Adjustment Layer optional colors - intermediate colors: +20, +6, +7, -4, utter, a little water color uniform,
4. khaki color fill, opacity 54%, filled with dark blue color, opacity 61 %, fill deep purple, opacity 76%,
5. fine-tuning, high light and adjust the selection in the middle of the resulting mask, high-light selection method: Calculation - Source 1: The layers merge layers, gray channel, the source 2: The layers merge layers, gray channel, Multiply mixed, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply merged, opacity 100%.
7.RGB get inside the mask channel, with a curve adjustment, high light adjustment: the black box on the left in the penultimate line of the middle line, blue line to the cut point, the middle tone adjustment: Up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall provides bright,
9. ship debris reduced saturation, saturation: -36,
10. sharpening the overall


1. Duplicate the layer, adjust brightness, contrast, down the merger,
2. into the LAB mode, select the image of the image, enumerated,
3. the layer mode to color, cover published layers,
4. into the RGB channel, filled with black and blue channels to extract the green channel selection, will fill the selection with white,
5. Hue and Saturation, Red: +20, +1,0. cyan: -7, +26,0. other data does not move, the layer mode to color,
6. into the RGB outlet, select the green channel selection, anti-choice, color balance adjustment layer, select midtones , values: -10, -6, +16. Shadow: +4, +5, -2. high light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel constituency, copy, paste back to RGB mode, layer mode to color, select the adjustment layer curve, red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue Channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, the layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, middle notes: -6,0, +3. Shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2. High light: -19, -26, -40.
12. Plus lightning effect.


1. Copy a layer into smart filter for the purpose of the filter effect can be adjusted
2. Filter - Render - Lighting Effects, all light sources, negate 17, Matte -25, plastic effect of 100, underexposure 32, negative 28,
3. New optional color adjustment layer, red: -100, -3,03,0. Yellow: -59, -6, -23, +1. Green: +9 , +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Intermediate colors: +16, -18, -18, -3. Black: 0,0,0, +28


1 out first filmed images. the sky with mask mask
2 parts.
3 Add the sky segment, and placed in the bottom of the screen can be adjusted.
4 new layer to the third layer, effectively to adjust the screen color.
5 changes on demand is not transparent, change the layer properties to Soft Light.
6 In order to find fuel in the texture effect, the color layer of material above and then added a layer of
7 modified layer properties to Soft Light, opacity changes on claim. This opacity is 86%
8 add mask, according to the contents of the screen need for appropriate trade-off.
9 in order to reinforce a sense of texture, then create a new layer, fill gray.
10 In the Add Noise filter and check the color for the Gaussian distribution, the number of custom.
11 layer to Soft Light.
12 mask according to the screen need to be properly adjusted.
13 noise, Add Noise - number 400, Gaussian delivery


1. Open the aboriginal image, catching color, with a mend tool to repair the roomy damage to areas
2. copy of a copy of the layer, Filter - Noise - Dust & Scratches, radius 10, threshold value of 6
3. to increase the layer mask for a copy, click on the mask, with the brush tool to smear people outside edge,
4. to layer one to Filter - Noise - Dust & Scratches, radius 10, threshold 6,
5. layers of a return to the History panel, Dust & Scratches the top layer, rub with a brush wrapped with a spot where the eye shadow face to be more cautious
6. If required to do the high points of high contrast to maintain or change the morale of the points with the point color scale,
7. repair some of the parameters of a reference all the fine-tuning your own will be better


1. using Photoshop to open original. According to the most out of life, low-end digital camera, black and white field can not be positioned well, so the pictures often are the same as this gray hair.
2. to copy the background layer, USM sharpening, number 50, the radius of 0.5
3. adjust levels, the right number for the high light, the number left for the dark intonation, the navel is the middle intonation, increase the brightness of the face , 0,1.0,200
4. adjust color balance, so that the whole picture partial green, more off the face. Shadow: -30,0,0
5. Create a black and white layer, enhancing the contrast, choose the %
7. this time, the photos looked very pale, add a Hue / Saturation adjustment layer, +15 saturation.


1. to ascertain a fold of the background, drag the photos will need to make the background layer, resize and crop, border and background to make it match,
2. Adjustment - Hue and Saturation, full size: saturated -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation, full size: 0, -80,0
5. Duplicate Layer, Hue and Saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increase in the old sense of the number of 25%, Gaussian distribution,
8. Mixed Mode to Multiply,
9. Image - Adjust - RP,
10. to remove the border of the piebald, Select the rectangle selection tool with the mid side of the border, DEL key to delete the profile part of the variegated,
11. clashes with the eraser tool around the motley characters


1 Open a picture
2 Press d key (default foreground)
3 window - Action - Create a new action, name - rain
4 Duplicate the layer, in the new map layer, filter - pixelated - the size of dots of the cell - 3 spots of the more heavy rain to the larger spots of the more rain you get.
5 Image - Adjust - Threshold 255. the layer mode to color filter
6 Filter - Blur - Motion Blur, Angle 76, from 22, OK. from the wet night to the greater The larger the more rain from the smaller
7 Filter - Sharpen - in the implementation of a filter - sharpen
8 point window - Action - point apt stop playing; then play the chose operation (actually copied the wafer) 3 periods (so there namely a 4 rain floor)
9 to open the vigor in the first frame on a close above the 3 layers of the eyes, leaving only the background and layer 1 eyes; 2 layer 1 frame closed eyes, open the Layer 1 copy of the eyes; 3 layer 1 frame off a copy of the eye, open the Layer 1 copy 2 of the eyes; the first frame off Layer 1 copy 4 2 eyes, open the Layer 1 copy 3 of the eyes. all the frames in the selection, devise time is 0.2 seconds.
10 last saved animated GIF format.