PS technology , it namely value learning

We have to remember that 20 species of PS technology! ! ! Make your photos the United States ...


Photo name: bring up photos soft blue and yellow - a simple way,
1, open the original material, according to the background layer Ctrl + J copy the layer, point channel panel, select the blue channel, image> apply image, layer as the background, mixed to Multiply, opacity 50%, RP tick,
2, back to the Layers panel, create a curve adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black, layer blending mode to Multiply and Opacity to 60%, choose the elliptical selection the middle part of the selection box tool, press Ctrl + Alt + D Feather, a value of 70, and then double-click the Delete key to delete, again on the text, complete the final results.


Photo name: bring up photos pretty red and yellow,
1, open the original material, Ctrl + J to copy the background layer a layer, press Ctrl + Shift + U to color, Enforcement: Filter> Fuzzy> Gaussian Blur, number 4, for the color filter layer blending modes, layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E stamp layers, layer blending mode to color. 3, create a gradient map adjustment layer, purple - orange, Alt + Ctrl + G with clipping mask.
4, create the brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 , establish a Levels adjustment membrane, 8,1.00,255
7, the color adjustment layer to create an optional, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, white: -5,0,0,0,


Photo name: bring up nostalgic landscape photos,
1, open the original copy layer
2, curve adjusted value of RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color poise, value: 0,0, -34
5, optional color neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56%,
7, the smokes pull material into the diagram, into the elemental Figure on, soft layer mode, the appearance part of the sky in adding to wiping out, back layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, excluding layer mode, copy a layer, filling 52%
10, curve adjustment, numerical RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, gradation, value: 29,1.00,227, filling 58%
13, optional colors, independent colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, sharpening photos look


Name: rejuvenation treatment the figures delicate skin,
1. Duplicate the background layer. Filter - Blur - Gaussian blur radius to 10.
2. set the layer blending mode to Double-click the layer appoint to open the right mixture of options. In the Advanced Mixed, cancel advanced R and G channels,
3. Use of the color balance of the image curve, according to the picture to resolve
4. Create a new layer, select the repair Brush (J), select layer sample. Freckles or blemishes on the large, ######## removed.
5.ctrl + shift + alt + E,ed hardy t shirts, stamp all layers, tick the skin part, you can choose their own way, I rather the pen tool, merely you can also use the Polygonal Lasso tool, to Note that to handle with the skin, so to remove the eyes, eyebrows, lips, noses. Anti-selection (ctrl + shift + i) delete the addition to the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass radius of 4, mixed mode to >

Photo Name: just let the stone have layers
3. the right to modify the blue channel copy to the inside layer, and to add the color you ambition, I used the deep orange
4. to copy the base map of the red channel to the layers, using masks to remove the sky and stone, leaving only the lawn, and to add color with the Gradient Map
5. Open the material lightning ball, copy the contrast of the red channel to have the largest file
6. Select blend mode to Overlay and adjust the situation and size, production it a light source, remove some unnecessary things (to decide), then use the radial blur filter to deal it radiation, allowed the formation of the beam emitted
7. to copy the pedestal map of the red channel inside the channel, enhancing the contrast, so that the grass part of the high-light revealed more affirmed, and then select the layer of high optical part of the paste inside, with white fill, layer mode to Overlay, and then use the mask to off the white part of the sky, leaving only part of the grass, the grass appears to be bright light in the light perception
8. Select the mask layer 1 and then invert the selection, selection by the sky, adding curves and hue / saturation adjustment layer to adjust according to private favorite and the naturalness of the color you like
9. Finally, some posters add units to the real thing looks imitation posters, in the use of color, I try to choose the gold to the color of the stone and decorated with to be reverberated among the color photos


name: sea beach,
1. Open the original, the new layer (Ctrl + Shift + Alt + N), and then stamp visible layers (Ctrl + Alt + Shift + E),
2. into the channel, copy the green channel contrast relatively mighty, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material tarry in, create masks, struck a person
4. create layers, soft mode, to make the sky look better,
5. to do the water reflection, Ctrl + T perpendicular flip, create masks, with a brush to paint their lusted effect, Multiply mode effect better, for maneuvers alter,
6. color, adjust according to private habits, optional Color is serviceable,
7.Shift + Ctrl + Alt + E, stamp visible layers, layer mode Multiply, and then mask the darker corners of pressure, chiefly for the water pressure the dark, so the picture is balanced Some,
8. Filter - Noise - Add Noise, the number 3, Gaussian distribution, color, make the characters and the same grainy sky,
9, the final fill the sky material


Photo Name: PS effects in turn hand-painted photographs,
1. open the original file, according to their own sense of color adjustment through the adjustment of the film, and dermabrasion, dermabrasion value not too much, (Neat image plug-in )
2. a new layer, color FEE7D6, (according to the color membrane character set), layer mode to Overlay and 25%, 20% with a brush in the face and neck skin and light coating,
3 . features of the careful work, cutting out the mouth, the emergence Copy (Ctrl + J), with the smudge tool to smear on the lip, so that the skin becomes soft and smooth lips (not too much strength)
4. New layer, to the lips and face paint, the color is FDC1D6, layer to color in the lips and face with a brush for painting the side,
5. with flame tool, the range is the high light exposure of 25 % draw the lip part of the high-light, with the Burn tool, the range is the middle 20% of exposure to enhance lip contrast,
6. a new layer, color 8E1A25, 3 pixel brush, draw the inside of the inside , then draw 2 pixels outside the lips lines (high-light some parts of the line built shun mask)
7. on the nose to circle the emergence, reproduction, use painting tools to be gentle around the nose refined, and then Dodge tool with a range of high light exposure of 20%, strengthening the high-light under the nose segment, and then color 422B2D, a 2 pixel brush to draw the outline of the nose (the line whether the light using the Burn Tool to make up for the afterward)
8. eclosion circle replication of the eye brows, eye brows with the stain tool approximately the soft rind thinning, and then use the Dodge tool scope is a high light exposure of 15%, strengthening the high-light under the orbital chapter of the range with the Burn tool navel, deepening the lines around the eyes,
9. wrapped tools used to apply some nice eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure of 20 % to enhance the high-light part of the eyes, making eyes look brighter,
10. color 080,101, 3-pixel brush, draw the lashes part (line Dodge tools to deepen the color depth can be used to make up) can also be used eyelash line routes ways triggered,
11. with the Smudge tool to smear the prettier eyebrow, brow slightly darker color of the rough spots that smear back along the fade down, and then 2 pixels with a brush to draw in the eyebrow eyebrows front lines, the eyebrows more structured,
12. smudge tool to choose the cilia brush, (along to hair texture to set brush shape), applied the process to be applied along the texture of the hair, not also much force, applied to be uniform,
13. hair brush partial applied to the normal interface, the (hair must be applied carefully)
14. Draw the hair texture to a new layer, layer mode to overlay, select the pencil pixels 1, (amounts ​​according to figures to set the image size), color, hair texture for the DFDFDF draw down the flat lines
15. horsetail some select brush tool, brush easily with a fork down the texture of some painting , the color layer model above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% of stream, color is white, draw dynamic forehead hair,
17. clothes and pendants with the smudge tool applied some of the softer, and then select the Dodge tool with a range of high light exposure of 20%, clothes and necklaces to enhance some of the high-light
18. Synthesis, sharpen the picture as a whole, Sharpening is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the (modified to add some background light, highlighting the theme)


Photo Name: post-look Raiders ,
1. Open the document, copy a layer copy of the
2. Select the duplicate layer by free transform to change the shortcut keys ctrl + t to make the characters more slender face shape
3. by Merge Layers ( ctrl + e), the use of cutting tools so that the shade contains the new essay, hack off the extra part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. Yellow - 40,ugg classic cardy, -20, -30, -80. white -0,0,0, -50. intermediate colors -0, -5, -5, -5
5. by curve (ctrl + m) adjust the overall color, RGB full channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjust - Color Balance (ctrl + b), the shadow -10,0, +15. Highlight - 10,0, +2.
7. With a stamp tool to evenly cover the skin around the mouth,
8. With a pen to circle dark bags under the eyes and face, the emergence of 60, the curve to lighten the constituency Dodge bags under the eyes and reduce the statement of facial muscles do not loosen,
9. continued emergence of 60 constituencies, the curve lightening, the face, full point, output 146, input 113.
10. the high part of the circle of light out, pluming 60
11. curve lightening, the face, full point, output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin, the lasso tool, the emergence 5, copy layer, to duplicate the layer move down, in order to achieve eyebrow shaping effect, stamp eyebrow shaping, this must be very detailed
13. began to adjust the eyes, the plebiscite out of the eye part of the circle, copy layer
14. eye shadow pen circle the place to do, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part of the Hue and Saturation: 0, -40,0
17. Circle the details of the root of the upper eyelid eyelashes Department ahead the corner of lower eyelid 1 / 3, press DELETE key to delete the selection, the exposed high light-bit,
18. delete some more eye shadow, feather 40
19. circle the details to the upper internal corner eyelid 1 / 2, press DELETE key to erase the culling, the exposed high light-bit
20. the eyes ring out, copy the layer, emergence 1, part of desaturation whites, piebald back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes later the curve adjustment layer of sunny copy, pen brush behind the 1st part of the left eye, showing some shadows,
23. remove the pupil part
24. with eyes the color curve adjustment, so that the same
25. plus look high light
26. circle the lips, emergence 2, Curves lips high light, adjust the lip color
27. adjustment of the nose Liang Gaoguang, adjust shadow highlights
28. with the optional color palette for a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light ): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm converge,
31. Finally, in the right places to complete with flashing brush

1. sketched with a pen on the back of a wing shape,
2. in the present working directory into the path 1, double-click the work path.
3. the path into a selection (Alt + Enter), copy the layer, emergence 3 pixels,
4. filled with white, select the appropriate intensity of use of painting tools, apply the appropriate edge.
5. Duplicate the layer, filled with another color that can be distinguished Layer 1, Layer Properties regulating transparency Oh,
6. in accordance with the method of production of a second in front of the wings, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. new layer and draw a circuitous selection using the brush circle in the constituency, then adjust the transparency,
8. Copy paste into the new background layer The Alpha-channel, in other places outside the top left corner of the black filling, use the Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. Select Alpha channel (the channel holding down Ctrl), in Figure ground area new layer, fill light yellow,
10. with a pen generated beam path, the path into a selection, yellow and white gradient fill color,
11. adjust transparency, rub with the eraser at the bottom of the light is light becomes the normal,
12. People who sketched with a pen light in the path, the path into constituencies strokes with a painting in the edges, adjust transparency, combined with the eraser and smudge tool will attain better results and cost more Several halo effect will be better


1. to find a fold of the background, shuffle the photos will need to make the background layer, resize and harvest, boundary and background to make it mate,
2. Adjustment - Hue and Saturation, full size: -35 saturation, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation , full size: 0, -80,0
5. Duplicate Layer, Hue and Saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increasing the antique sense of the digit of 25%, Gaussian distribution,
8. Mixed Mode to Multiply,
9. Image - Adjustments - Phase, br> 10. to remove the border of the mottled, with the rectangular selection tool to select the inside edge of the border, DEL key to delete the outline part of the variegated,
11. clashes with the eraser tool around the motley characters


1. Duplicate the layer, into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool to fill the white figures and flowers ,
3.Ctrl + click on the red copy to make it into a constituency, remove red copy of the return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers matting done,
5. Method One: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation of coloring, the new hue saturation adjustment layer , coloring the before tick, Hue = 345, Saturation = 60, Lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: the new color balance layer, the middle tone - color Order: +100, -54, -20 / +100, -35, +43
Shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21 , -23, -5. Magenta: -100, -45, +32, -1
8. gradient mapping application, new Gradient Map 1, the layer to color


1. Open the original image, duplicate the layer, filled with pure black, overlay mode.
2. New Hue and Saturation layers: Saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, shiny 0, the material 69, 0, exposure, surroundings 8,
6. chop, add text elaboration


1. Duplicate Layer, Filter - Blur - Radial Blur: number 71, fuzzy method - Zoom, Quality - Good,
2. create templates, sparks car, then smear the cycles struck a dynamic,
3. Levels - optional colors. Add material, rendering the whole atmosphere, the details of adjustments made with the Dodge, the main diameter of 5, the hardness of the minimum

1. In the RAW to adjust the brightness, contrast, etc., for laying the basis after the adjustments,
2. To join the sky material, simple transparency, make the sky into the layer,
3. New Adjustment Layer, optional Color - Intermediate Color: +20, +6, +7, -4, perfect, a little water color uniform,
4. khaki color fill, opacity 54%, filled with dark blue color, opacity 61%, filled deep purple, opacity 76%,
5. fine-tuning, high light and adjust the selection in the middle of the resulting mask, high-light selection method: Calculation - Source 1: The layers merge layers, gray channel, the source 2: The layers merge layers, gray channel, Multiply mixed, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply mingled, opacity 100%.
7.RGB get inside the mask channel, with a curve adjustment, high light adjustment: the black box on the left in the penultimate line of the middle line, blue line to the cut point, the middle tone adjustment: Up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall provides bright,
9. boat debris reduced saturation, saturation: -36,
10. sharpening the overall


1. Open the image copy the layer, Ctrl + Alt + ~, by constituency, emergence 3-5. curve brightens, about 18,0
2. adjust levels: 25,1,20 , 245. mask the main characters and the details given rise to some
3. stamp on the characters to brighten the edge of the sharpening modified dermabrasion.
4. on the back layer for color balance, the middle notes: -12, -10, -13. high light: +8,0, -19.
5. back layer, into the LAB mode,
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%,
7. the application of the image on the new layer, layer: merge layers, soft mode, transparency, 100%,
8. adjustment layer to adjust the curve on the lightness channel, 5,0
9. on the LAB color image saturation, hue adjustment, full size: 0, +10,0. Yellow: 0, +35,0. Green: 0, +15,0. Red: 0, -20,0. Blue: +10, +30,0.
10. into Levels: 20,1.20 , 245. on the lightness channel to adjust the gradient in the mask with a circular out at the chief characters, and then brush clashes details.
11. stamped, return RGB color, the image is optional color options, red channel: 0,0,0, -30 given rise to the petals on the mask,
12. stamp, the new blank layer, sprinkling with white brush to increase effects of pen pressure. 100% hardness, spacing, +54%


1. Duplicate the layer, soft light mode, the use of soft layers is optimized for
2.Ctrl + U hue saturation adjustment, with a fodder learn the color of the leaves, change the hue of the season has reached the purpose of transformation, we need the feeling of winter to find the leaves of the hue, the brightness adjustment for the most light.
3. Note lightness tolerance under which the details of the slider, you can select constituencies reduced saturation, hue can also be used to cultivate transparency, here is the color range, closing duplicate the layer, with the background layer to color range.
4. constituencies and returned copy layer selected, emergence, for the selected part of the saturation of 0,
5. snow emotion of the diagrams in the anti-choice, you tin use the color range, you can too use the hue saturation, and eventually add compare, wiping out some dress.
6. some little stiff snow, superimposed on the snow to be ambiguous, with the contrast in the copy layer selected, alteration the overlay mode, copy the layer below in contrast,
7. the overall rate of a contrast with perspective about clashes between a large brush, not including figures, giving details of the snow.


1. Duplicate the layer, adjust brightness, contrast, down the combination,
2. into the LAB mode, select the image of the image, thought,
3. the layers mode to color, stamp layer,
4. into the RGB channel, filled with black and blue channels to extract the green channel selection, will fill the selection with white,
5. Hue and Saturation, Red: +20, + 1,0. cyan: -7, +26,0. additional data does not shake, the layer mode to color,
6. into the RGB channel, select the green channel selection, anti-selection, adjustment layer color balance, choose the middle tone, value: -10, -6, +16. Shadow: +4, +5, -2. high light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel selection, copy, paste it back to RGB mode, layer mode to color, select the curve adjustment layer, the red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue Channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, the layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, middle notes: -6,0, +3. Shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2. High light: -19, -26, -40.
12. Plus speedy effect.


1. establish Hue Saturation adjustment layer, saturation -49,
2. to establish an optional color layer, red: -49,0, +7, -41. yellow : 0,0,0, -23
3. to establish the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26. White: 0,0, +46,0. Intermediate colors: 0,0, -6,0.
5. Optional color. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, noise abatement, sharpening, painting and simple to use tool to repair the knee approximate The speck,
7. plus hidden corners, making a heart-shaped selection, emergence, with the curve provides bright.


1. Copy a layer into intelligent filter for the purpose of the filter effect can be adjusted
2. Filter - Render - Lighting Effects, always light sources, negate 17, Matte - 25, the plastic effect of 100, underexposure 32, negative 28,
3. New optional color adjustment layer, red: -100, -3,03,0. Yellow: -59, -6, -23, + 1. Green: +9, +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Intermediate colors: +16, -18, -18, -3. Black: 0,0,0, +28


1. slightly adjust color hurl, adjusting a rough tone, establish Levels adjustment layer Levels full channel: 0,1.35,255. Levels of red channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. To establish the Hue / Saturation adjustment layer reduces the saturation of original, Full Figure saturation -30
3. to create a Photo Filter adjustment layer, the first step in the blue has bring an end to ... with this step to deep yellow, the concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, clutch down the ctrl points of red channel, get back to photos selection populate the black mask filter.
4. to establish an optional layer of color adjustments, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. The windows brighten the extra, the establishment of the Hue / Saturation adjustment layer to part in the window and wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, to differentiate the characters and the circling environment, the set after the mask used in the massive soft black brush to figure as the megalopolis angle rub a bit on it. Levels +20, +20, +40, select midtones
7. Establishing Levels adjustment layer, the first Ministry of dark and light general points out, black and white in the disguise using the gradient tool drag from the top right corner to the lower left corner of the black and pearly gradient, to the right as yet. Full channel 0,0.80,255
8. Add light, use the , the upper left corner a morsel dark, so add a mask to wipe out the upper left corner. Points of light, strength: 28, Focus 52, gloss -100, materials 100, 17 exposure, environmental 32
9. Create a new layer back, look at light and dark contrast to enhance the establishment Levels adjustment layer in the mask gradient tool with black and white drawing, from the upper left to lower right corner of the black and white gradient, the upper right corner of the light is entirely obscure the part of the mask with a white brush in the brush out, and then figure out from the mask in the brush. Levels all channels. Levels full channel: 0,0.80,255
10. Sharpening, a mini dermabrasion, add the word to complete.


1. New gray coating, with a curve to adjust the brightness, 152,124
2. cutout eyes and jaws, to be accented,
3. reduce the overall saturation, saturation ° -56
4. superposition to the overall color with the color tendency,
5. hide the hue and color overlay layers, and open access panel, copy the R channel,
6. Create a new layer glue, and use filters color mode to adjust the transparency of


1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black class color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hidden Back to the background layer,
5. to get in front of the high-light selection adjustment curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or an applicable adjustment to the color, brightness +4, contrast +7


1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to the original Figure reduce transparency
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hide the background layer back,
5. to get in front of the high-light selection adjustment curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase , or an appropriate adjustment to the color, brightness +4, contrast +7


1. Select the blue channel RGB layer, mixed-mode
2. channel mixer, hook the
3. resurfacing, landscaping figure form.
4. to give people the skin and clothes with parameter default; use after the effect of blue, also need to use the
6. to the effect of step 6 are mixed mode to
8 ..
9. fine-tune the look or facial skin color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The


1. Create a new layer, filled with yellow, overlay mode, numerical 247,240,197
2. Copy fair the yellow layer, Linear Burn mode, the mask clashes yellow motorcar, avert car color than yellow,
3. adjust brightness, contrast, high light part of the natural subject of color and exposure, brightness -20, contrast +64, the new adjustment layer saturation, saturation -31. OKAY The last brightness of the daylight, high light color and detail at the subject, the shadows can be ignored,
4. Duplicate the background layer the shadow highlight adjustment, the best place to shadow detail as the base, shadow: the number 100, color width of 33, radius of 102, high light: the number 0, the tone width 50, radius 30, to adjust: +20 color correction, contrast adjustment between 0 and 0.01% of the construction of black, white construction 0.01%
5. Duplicate the background layer to adjust the sky brightness, with layers make up the sky over the lack of exposure,
6. tuning the details, to erase the sky wires, fix, Clone brush will do,
7. Flatten image, fine-tuning the details, sharpness


1. buckle out of character, adjusting photo color, contrast and extravagant consideration to the photo did not make light of the legs in place need to be adjusted
2. adjustment of skin color, clothes color, mainly used to adjust the layer , then add the background material, reflection, etc., pay attention to the feet point down the extend deformation with the Free Transform to adjust drop
3. in the thighs add a little high light, high light pen situation outline, fill Gaussian white --- Fuzzy --- depress transparency can also be fraught with 50% gray pattern of the new soft layer --- --- Dodge tool used to draw roads guide to Rome, can accessible reach the destination can
4 . material, the text with a click, the last sharpening can


1. the photo opens, find some manner alike to the palace.
2. will be deducted from the house and put a new layer. You can use the Polygonal Lasso tool to select housing, and via a relatively soft eraser tool to expunge the background.
3. now need a new background, from the stuff library to pick a
4. the sky into the rear of the house (air layer into the housing layer below), and add a little perspective perversion effects of the sky to increase the depth of the background.
5. observe the edge of the house, there still remain some of the original color of the sky above.
6. with the magic wand select the local housing floor space, and then do Select> Modify> Expand directive to expand the range of alternatives, enter an appropriate value of the selection to comprise the need for color correction house edge. Executive Image> Adjust> Hue / Saturation directive to adjust the color of the edge of the color of the roof line.
7. continue to use the Hue / Saturation to adjust the housing and the color of the sky to enable them to coordinate possible integration.
8. will have to remove the palm trees next to the house, with the copy stamp tool to copy the house to draw tiles between the part of the ground and first floor.
9. add to a lock of lightning additional to the screen traction. No feathering effect using the brush to draw a lock of lightning, copied to a new layer, add the glow effect. Then use the Dodge tool to highlight the roots of lightning clouds.
10. using hand-drawn pictures or around the house to add some dead tree, remember to adjust the color and sunlight.
11. To make the house look more worn, painted on the roof of a chasm.
12. Continue to add the effect of break. Broken beams and aqueduct, to crash another roof and glass. To crash asset and then copy the stamp tool to use to fill the place vacated
13. Add some stains. First, the skylights, with an random brush to add some variegated glass. Then change the layer blend mode stain it with a good cup can be mixed together. I used this tutorial brightness mode.
14. on the whole house to reiterate the same treads, using a little deeper color and blend mode set to overlay mode. Attention to seams and brims, this location is the most prone to smudges.
15. porch enlarged elaborate.

1. into the channel panel, and then use the transparency of 50%
Channel Green - Mixed Multiply, opacity 20%
channel red - mixed dark, opacity 100%
2. adjustments - color balance - high gloss - Levels: -8, +13,tory burch flats, +11
3. blue channel during the first application image, layers: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel of a little,
full channel 6,0 and blue channels 4,15
5. Copy a layer copy of the out of the blue channel of the operation again, mixed Multiply, opacity 50%
6. Finally to do is highlight the characters, and with the eraser, given rise to some folk, pay attention to the appropriate lower transparency.


1, this effect can be directly transferred with curves out over the whole channel is about 1 / 4 grid,
-105.125 green channel, blue channel 151.254
2. with lens correction added black border. Add Noise, which vignetting - the number of -28 (dark), the focus +5,
3. with the brush tool on the Internet under a pen scratch about in the above picture and then mingle the layers
4. Add Noise, quantity -2.45
5. to do a side


1. Duplicate the layer blend mode to Screen,
2. Coating 2 Mask Reverse given rise to the eye
3. back (alt + ctrl + shift + E)
4. channel mixtures, select the color, red +54, Green +54, Blue +32
6. Mixed mode - are stacked
7. on the back layer to adjust the image - adjustments - Shadow / Highlight - Shadow: 50,50,144
high light: 0,50,30
the middle of the transfer: 20.0
0.01,0.01
8. again back
9. wipe away the right audacity with the stamp of the sun
10. with the Dodge tool - the range of high light intensity of 50%, given heave to the eye reflection, just rub the eye black,
11. again stamped Filter - Other - High contrast, parameter 80
12. to change the high contrast that layer Mode to Soft Light, promote contrast,
13. use your favorite The method of sharpening
14. for a long time less saturated red hue, or other fine-tuning to try

1. Duplicate the layer, the overall provides bright, curved top right,
2. with a constituency hook tool neb circle, and then brightens with curves to highlight the nostril and nails
3. color balance - high gloss - Levels: +8,0, -22
midtones - Levels: -10, + 29, +27
Shadow - Levels: -2, -3, +14
4, Optional Color - Red: 0, +1, +23, -29
Available colors - Yellow: 0,0, +4, +28
5. adjust the affected skin color, slightly darker color reception
6. with a curve to highlight the texture of the dark tank pressure, is a black mask, with masks with adjustments to modify the general good that
7. brighten the overall color, top right of the curve,
8. Finally, the lips of the modification,
9. add text



1. use the
2. using ctrl + I RP operation:
3. Levels using ctrl + L to adjust values ​​for [145,1.5,160]
4. transferred into the general layer, after a new vacant layer and fill it with black on the bottom.
5. using ctrl + T to free become, the use of outlook.
6. duplicate this layer, and use the free transform the vertical flip.
7. aline the two layers, and join attach.
8. use the Free Transform to adjust the zoom feature of height.
9. use of color filter


must remember that 20 kinds of PS technology! ! ! The United States will not do your photos! ! !

a simple digital photo retouching
1 open late pictures, favor the implementation of color / saturation (-40) to reduce saturation.
2 new layer, the layer mode to soft light, with the brush tool will need to scour the part of the painting several periods, where you can easily extract the color palette used
3 pictures soft color conversion is insufficient, then about the implementation of the following Gaussian blur filter (+85)
simple with photos came to light fewer than
1 Open the image, copy the background layer, change the background color filter layer pattern
2 color of the background layer order to adjust

30 秒 get Plmm aesthetic photos
1 Open the picture, copy the background layer double
2 as reproducing the background layer a Gaussian Blur (radius of 4 to 6) will copy the background Second, the prototype layer to light
3 new layer, add filling pattern (half pre-defined gray well and half white horizontal stripe pattern), set the blending mode to Multiply

Open the image transmission effect
1 picture, a new layer, select the View - the ruler, select the move tool, respectively, from the top and bottom drag out the two blue markings (9 cell)
2 rectangular selection using tool, fill the box (dark gray 1,9, 5,7 black, 3 light gray) to psd format, and then close the file
3 to Filter - distort - the replacement, select the save psd file
Note (value = 255) is the largest positive displacement, that is the corresponding image pixel to the right and down; gray (color value = 128) did not produce displacement)

shading effects
1 photo Open the image, Select - Select All, then Edit - Copy, create a new channel, Edit - Paste to paste the copied images into the new channel]
2 implementation of the image - adjustment - Anti-like, back to RGB channels amend - clear, delete the original image
3 to Select - Load Selection, call the new channel, Executive Editor - fill (the color)

atomization
1 Open the picture, the new chart Layer one, set the foreground / background color (black / white), to Filter - Render - Clouds, will add a layer mask layer
2 Repeat the filter - render - clouds, image - adjust - brightness / Contrast (80,0, a mode to color filter layer)
character illustration effect
1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray, +30, +60 , +10, monochrome), the implementation of the filter - stylize - find edges, remove the noise
2 Levels of mixed mode to Add a Levels adjustment layer layer, adjust the output levels (0, +155) the implementation of form, color image Marxist
4 - adjustment - optional color, fine-tuning of color (red, 0, +100, + 100, -75; yellow, 0, -40, +100, -40)

old photos using the color overlay to add light and color effects
1 Open the image, copy the background layer, the implementation of the image - adjustments - to color, adjust brightness / contrast (-42, +18)
2 Add Merge Visible and then add the filter
3 - lens fan (brightness +100)
4 Duplicate the background layer, added again, yellow)

to add photos blue sky
1 Open the photo and copy of a Select the > 2. on the replication layer uses Gaussian blur filter (+4.0).
3. do color adjustments (+50,0, -64)
4. with a blurred edge eraser wipe requires clear section.
5. the appropriate use layer blending modes.

create hazy in bright (landscape, ecological class)
1 Open the image, copy the layer.
2 copies layer The layer mode to br> 5 add some sharpening,CL shoes, reducing transparency.

a photo to add a glass effect
1 selected area, press Ctrl + J
2 Gaussian blur on the shear layer (+ 3.1 pixels).
3 to adjust color balance (-39, +29, +16).
4 new layer. Choose the thickness of the glass area add a custom gradient filling (black and white gray, the order is dark, glossy, dark, high light),supra for sale, press Ctrl + T on the constituency to adjust the thickness of the glass.
5 filter - distort - Glass , select your favorite pattern (distortion, smoothness of 1, zoom 50%).

burning paper effect of the old photos - PS handling $
1 pure open a picture, the implementation of the image - adjustments - Hue / Saturation (+1, -58, +1).
2 image - adjustment - change (mid-tones, deeper yellow, deeper red highlights).
3 Duplicate the background layer, the implementation of filter Mirror - texture - particles (9,56, vertical).
4 new layer, to Filter - Render - Clouds.
5 and sprint the image - adjust - brightness / contrast (+27, +100 ).
6 with the Magic Wand, select one layer of black constituency.
7 off layer of a preview, press Copy the background layer, the foreground color to dark brown.
8 Select - Modify - Expand (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer one, with the wizardry wand select the black constituency
10 off the background layer and A preview of the layer, copy the background layer selected, Executive Editor - Clear.
11 images - the canvas size, height / breadth of one centimeter was increased, positioning (in).
12 opened the background layer Preview , select the background layer and fill the foreground color (light brown).
13 Duplicate the backdrop layer chose, do Layer - Layer Style - projection. (affirmative end laminations, 45% opacity, angle 45, from 7 amplify 2%, size 10).
14 merge all layers.

mottled effect of the other masterpieces frame a new system of law
1 file by D key fill the background is white
2 Then, filters --- --- clouds rendering.
3 CTRL + M to adjust under the curve (high contrast black and white).
4 After completion of the effect of further next filter - twist - Glass (Distortion 7, 3, smoothness, texture - canvas, zoom 50%).
6 Create a new layer, the background is black, the other a new layer, add sufficient white rectangle.
7 layers in the implementation of the rectangle where the filter - distort - replacement, select the default option. Then find the newly saved PSD file can be replaced.

PS performance the air of your photos (landscape)
1 Image - Adjust - Levels (RGB +29,1.0, +234). Form Color doctrine l2wvg.V 'T @ 4I
2 Executive Hue / Saturation command (full size -14, +41, -1).
3 continue to Hue / Saturation (red, hue values ​​decrease, saturation degree increase).
4 continue to Hue / Saturation (yellow, -22, +45, -1). www.swcool.commDZ-u
5 continue to Hue / Saturation (green, +15, 0,0).
6 adjust the brightness / contrast (brightness reduce / mushroom contrast). Xingse doctrine (H {T2P4ccN
simple sketch effect
1 easy open picture, do to the color, adjust brightness / contrast (brightness decrease / increase contrast).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation of the filter - the style - find the edge, then the UXXXXX sharpening, and then layer patterns
to Overlay.
3 new layer, fill the white, add noise, then the motion blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%) , wipe some of the high light.

strokes drawn sketch effects
1 Open an image, copy the background layer, select Layer 1 copy to Filter - Blur - Gaussian blur (2.0 pixel)
2 copy background layer repeatedly, select Duplicate Layer 2, the implementation of the percolate - limn - watercolor pen (20,60,80), the layer blending mode to darken.
3 Duplicate the background again Layer, Duplicate Layer 3 selected, the foreground color to red, to Filter - Sketch - Sticky Notes (25,7,10), opacity set to 30%.
4 Duplicate the background layer again, Copy the selected layer 4, the foreground color set to black, foreground / background color set to black / white, and the implementation of the filter - sketch - copy (1,50), the Executive Levels adjustment (RGB, 157, .0,159) , the fill value 30%.

easy way to do special photos
1 Open an image.
2 selected the blue channel in the channel, and then in the blue channel to Filter - Style of - overexposed, you can point back to the RGB channel.

Matrix effects
1. Create a size of 500X300, RGB mode, the white background paper.
2. with a free text input tools Enter a channeling 01 code, and press CTRL + T to put it over the vertical circulation and pull into a multi-copy number ranging from small, casual place a few. Another method is to use filters, you can achieve very good results. is the menu - Filter - Texture - particles, the intensity and contrast are adjusted to 100, molecule type selection vertically on it.
3. to those 01 code all the text layer and merge the background layer, and the foreground color R: 100, G: 255, B: 0 or so green, the background color set to black.
4 Select Menu - Filter - neon light effect, radiant size set to 10, brightness 15 .
5. Select Menu - Filter - Stylize - light edge, the edge width is set to 1, the brightness set to 20, about the smoothness set to 1.
6. Select the list - Image - adjust - brightness / contrast, the brightness to -10, the contrast adjusted to almost 60
Ps . is to use the washing process to wash negative slides, it would win more quirky and amusing colors. If the MM portrait photograph, will make even filled with a decadent decadent avant-garde colors.
1 Open image, and let the right shows Multiply Multiply br> 5 in the control panel, select the blue channel channel into the 25,0.75,150 to validation.
6 selection in the green channel way control panel, work to Input Levels Brightness / Contrast shortcut keys


开心一下：
1.我不小心把“我爱你”误发给你了。如果你接受那就储存起来，如果你不接受，就把这三个字返发给 我。
2.我觉得你真的不是个合格的朋友，你还是改行做我老婆吧！
3.玫瑰，你的；巧克力，你的；钻戒abercrombie & fitch ，你的；你，我的。
4.不是每一朵花都能代表爱情，但是玫瑰做到了；不是每一种树都能耐得住干涸，但是白杨做到了；不是每一头 猪tods online 都能收到短信，但是你做到了;也不是每个人都喜欢猪 ,但是我做到了