wooden pallets, are made of natural wood as raw material pallets. Is now the most widely used tray. Tray is used for container, stacking, handling and transport as a unit load placed on the goods and products, the level of platform devices. General use of wood, metal, fiber production, ease of loading and unloading, material handling unit and the small amount of supplies. The main types of wood pallets, plastic, metal and other materials is now the most widely used wood, because its cheap and strong.
wooden pallets
wooden pallets
wooden pallets
Introduction wooden pallets of wooden materials, drying setting treatment to reduce the moisture, eliminate internal stress , and then cutting, polishing, decapitated, pumping side, sanding and other finishing profile formed plate processing, the use of anti-off function with a nail (the nut structure with individual cases) will be bound into a semi-profile plate tray, and finally for finishing, non-slip handle and sealing wax. Wooden pallets are now the most widely used tray. Tray is used for container, stacking, handling and transport as a unit load placed on the goods and products, the level of platform devices. General use of wood, metal, fiber production, ease of loading and unloading, material handling unit and the small amount of supplies. Logs: the material present, wooden pallets are pine, iron shirt, fir, and other miscellaneous hardwood, representatives of different materials of different pallet performance. European pallet standards specified can not be used poplar. Water content: the tray of the original moisture content of wood pallet shrinkage, and even cracking. Application of high moisture content of the standard indicators of the tray to its strict control. European standards for wood pallets wood moisture content can not exceed the quality of the dry state, 22%, 22% to 26% range is defined as a small defect, more than 26%, or failed. Wooden pallets (wood pallet): natural wood as raw material manufacturing tray. Is now the most widely used because of its cheap, strong. The main parameters: length / width / height / length and breadth error / diagonal error / Rated Load / Maximum Stacking Capacity / deflection / surface slip coefficient of advantages: high accuracy, easy to distort, reinforced with high strength bolts not from the nails, and good solid tray type 1, flat tray tray level is almost synonymous with the tray, as long as a Tito plate, generally refers to the flat tray is concerned, because the most widely used flat pallets, the largest number, GM the best. Flat tray can be divided into three types. ① According to the structure and use of classification. A single form, single-use double-sided, double-sided dual-use type and airfoil other four; ② way under the truck into the classification, there are one-way insertion, double insertion, three kinds of four-way insertion; ③ According to material classification. Wooden flat trays, steel flat trays, plastic flat trays, flat trays, and composite materials in five different paper tray. According to the China Federation of Logistics & Purchasing Committee of the tray (chip), September 2002 more than 300 pallets of manufacturers, pallet use and sale of enterprises in the preliminary survey results, when the various types of trays with a total of about 1.2 160 million, is now far more than this number, increasing annual output of around 20 million. Of which about 90% of flat pallets of wood, plastic flat tray, 8%, steel tray, tray and paper tray synthetic materials together accounted for 2%. Flat trays and plastic composite materials increased a larger proportion of the tray. 2, column tray column tray divided into fixed and removable two, its basic structure is the tray of the 4 corners with steel columns, beams can link to the top of the column to form a frame type. The main function of the tray column, one column supporting the weight of material used, to the high-stacked; the second is to prevent the goods placed on pallets in the shipping and handling phenomenon occurs during the collapse pile. 3, pallet box pallet is surrounded by a side of the tray, and some have a roof box, roof and some do not. Box board has fixed, folding, remove the three. Four weeks there tailgate plate, grid type and network type, therefore, surrounded by railing for the fence-like pallet, also known as cage tray or storage cage. Pallet protective ability to prevent stack collapse and damage to cargo; may not be stable loading shaped stacking of goods, and wide application. 4, column wheel tray and wheel tray tray tray and box compared to the lower part of the small wheels and more. Thus, the wheel tray has demonstrated a short distance, move or roll on roll off their own style of handling such advantages, versatility, applicability. Storage should be defended first guard against theft. The second non-material storage shall not enter any database, material custody bears the responsibility to stop, or act according to justice. Article warehouse and should be set near the fire equipment and fire equipment in the appropriate place to set configuration diagram, to ensure safety. Article database should have been certified by the Bureau of Standards Weights and Measures the amount of equipment, and should be corrected at any time take good care of in order to avoid differences in sending and receiving material weighing and measuring equipment at least once each year to the total correction. Article V of the material should be arranged in neat categories, with Article VI of the danger of explosive flammable materials should be kept isolated from other materials, and a prominent place in the Article VII Office and experience do not experience the material in the materials should be received after the materials were stored. Article VIII should be particularly important materials storage, and to the lock. Article IX Failing to settle shall not be made picking procedures for materials, perishable materials should be Article storage materials materials sector should receive the documents by sending and receiving operations input materials and recorded in the □ General finished the first storage management criteria for entry to enable the company finished Jiaoku, storage, delivery, sales return and transaction processing lag deposit products formulated guidelines for the process be followed. Finished second on the scope of warehouse management operations, including storage areas planning, income warehouse management, shipping operations and affairs in accordance with these guidelines and regulations. □ Library for the Planning Article Library for the Planning and Configuration (a) Material Management Division shall pay the library case finished, packaging, mode of storage areas and the area of planning required to effectively use library digital space. (B) library-bit configuration accordance with the following principles should be: 1. With warehouse equipment (eg hydraulic cars, trolleys, fire facilities, ventilation, power, etc.) and tools used in the storage and transportation planning transportation routes. 2. By sales category, product category are to be placed, planned product and similar products should be placed and customized products to facilitate management. 3. The finished product should be configured to send and receive frequent and convenient access to the library at the bit. 4. Will be finished by the name, size, batch number designated storage areas, marked in the Article Materials Management Division finished stacking Quality Management Section in conjunction with quality management, product packaging according to shape and set the product quality requirements and the accumulation of layers of stacked manner to avoid affecting the quality of products by extrusion. Article library spaces marked (a) library-bit number by the following principles, and be clearly marked in the appropriate place: 1. Level categories, according to A, B, C in order to compile the bottom up layer by layer, not when you fill in 2. Library-bit serial numbers. 3. Channel types, according to A, B, C in order to compile. 4. Storage class, according to A, B, C in order to compile. (B) planning products should be set for each digital library nameplate, marking their name and unit of packing quantity specifications. (C) of the Materials Management Division in accordance with the configuration of storage areas to draw Article VI of digital library management (a) send and receive materials handling Materials Management Division should acquire all storage areas, access to the dynamic specifications of each product, and according to the FIFO principle designated receiving and delivery units. (B) program product configured for each specification should in principle be more than two small storage areas to prepare alternate turns to achieve FIFO requirements. □ Finished Article Jiaoku receiving management means (a) Jiaoku department opened Jiaoku department for file back to the first page, the second held back by the receiving officer for check in, (B) Jiaoku sector by day, Ji Article VIII of receipt Materials Management Division Attention should Jiaoku Jiaoku content and the content of the finished product does check, if found Jiaoku reason code, product name, specifications, payment number, quantity, or does not match the top mark, they should immediately notify Jiaoku sector correction. □ Article IX delivery time delivery management control (a) Whenever one of the following conditions, materials management should be completed one day before Planning products received customer's 2. Domestic sales, export co-set products, according customer need dates. (B) provides a direct export products Jiaoku after the date of delivery with customs clearance. Article delivery note (a) of the Materials Management Division received the (B) the customer's business needs, the consignee, the place of receipt of non-subscription customers or non-location of its business, according to the following regulations: 1. Dealer orders, place of delivery other than their place of business, its 2. The consignee of non-subscription customers should order issued by the receiving customer notification before it can be specified for delivery. (C) of the Materials Management Division received a (D) to provide products (Scheme goods) before the date the customer needs Jiaoku or to convey to customers who agree to, and receive business only after advance notice of shipments delivery, if the department of emergency shipment, shall notify the Materials Management Business Unit Head of advance delivery, and then go through procedures for shipping notification . (E) without Jiaoku procedures for the delivery of finished products must not, For urgent delivery is required at the same time for delivery Jiaoku procedures. (F) to provide products before delivery, materials management subjects such as business unit received a notice of suspension of shipment, the delivery should be immediately suspended, and other business units received after the delivery of the shipment notification. By the director of emergency services by phone first Head of Materials Management, but should immediately after completing the formalities. (G) archiving. Article XI deployment of carrier vehicles, and control (a) of the Materials Management Division shall designate staff responsible for delivery vehicles and personnel carriers deployed. (B) of the Materials Management Division should be ready before 16 o'clock every day payable shipped the next day (C) If the carrier outside the vehicle may arrive during business hours delivery address who finished products before delivery, materials management Division shall notify the scheduled arrival time for business to tell customers of receipt. Article XII of the domestic and export the finished product directly to the delivery of (a) of the finished product delivery, the Materials Management Division should be according to the spared after verification send the invoice customers, stub and left open the invoice sent next month on the 2nd Department of the accounting department. (B) collection to the time of the last delivery of the principle, but the recorded, third, fourth, five of the shipment by the carriers only after the former nuclear point of release is correct. After receipt by the customer shipped the third copy shall be submitted customer, the fourth, five of Materials Management Division by the carriers to return, the fourth copy should be sent back to the business which are brought by the actual needs of customers, carriers hold back the fifth joint According to apply for freight, the Sixth Joint Materials Management Division self-preservation. Customer Carry Article XIII (a) customer needs from the shipment, contact the Materials Management Division should confirm the business sector. (B) finished loading, the carrier in the Article XIV of the delivery of direct export of finished products (a) of the Materials Management Division should be finished before the arrival clearance specified terminal or container yard to reduce the additional costs (such as the special inspection fees, monitoring fees). (B) of the finished product delivery, the Materials Management Division should be in accordance with the The fourth copy sent to customers free, dependent on the materials management section, the fifth leaf after receipt by the customs broker held back by the carrier, pursuant to which the application fee. (C) Export invoice is sent to the business sector together for the receipt and counterfoil and the invoice is left open on the 2nd of next month to send the accounting department summary. (D) finished in the factory built-in cabinets must be lost by the following provisions: 1. Materials Management Division should be in receipt of the notice the business sector, that is to contact the container into the factory shipment. 2. Loading shall be by way of customer requirements with counters operation, the container should be installed after completion of the seals sealed. Article XV of the correct single product delivery, Not transport: billing errors should be rectified in the original single and affix correct chapter, if difficult to correct, then the original single of the Union with the Void 2. Has been offered for transport: billing personnel should immediately open a turn sent to the actual needs of transportation customers, that customers send the fourth leaf, the fifth and sixth together sports scientists kept in storage. 3. If the invoice has been sent to customers to be re-opened by mistake who votes with the new development should (B) Not transport: cf the first paragraph of this Article shall apply. 2. Has been offered for transport: transport managers should immediately close friend of the terminal or container yard for regulations. 3. Article XVI, sign: 1. Does not cover 2. 3. Chapter for other purposes (such as documents Seal) to serve as (B) the Responsibility: Materials Management Division of the 10th of each month to be shipped last month to sign back together yet to be recovered, should be immediately accountable, and in accordance with the contract imposed for shipping, but should be complete before the end of collection, order bound to send the accounting department checked for reference. Freight Audit Article XVII (a) of the Materials Management Division carriers received each month back to the payment. (B) of the Materials Management Division reviewed freight should view the factory and customer billing date of receipt, etc., are there Overdue or breach of contract, are following the contract imposed for shipping. (C) if the Article XVIII on product recipients and invoices over reaction (a) of the Materials Management Division received sector recipients to open the (B) the beginning of each month at the time of business last month, has shipped to customers without an invoice, order (system) single, commodity specifications, quantity, delivery location and fill stand Causes and Solutions Form □ Return Goods Transport Management Article XIX Section received the contact materials management business delivered a , if the according to the Diershitiao acceptance of return goods (a) return goods shipped back to factory, warehouse sports science should be returned together with the relevant personnel to confirm the reasons for the finished product exception is correct, if indeed the facts, should return the number of actual filling in the Ministry of the original invoice back to the customer or sales certificate. (B) of the Materials Management Division received no Article handling a returned goods handling system returns goods to be re-handler, materials processing sector should urge the Division to reclaim processing. Twenty-two returned for corrections (a) if the returned product with the in the third brought back together by the transport company so apply shipping, the second back to the business department, the first joint sports science and so to urge a temporary position. (B) the business identification return goods are indeed correct, the situation should be corrected based on the actual return (C) if the return lines Zhu error back, the business sector should be opened in the original the provisions of Article XII, and in the □ twenty three lag lag finished product category management, reporting, (a) Delay in part by the Materials Management Division products by category and distribution of digital library No provision is kept, and piled on each unit (such as a plate) fixed storage areas storage easy to manage. (B) the causes of stagnation and the finished code: 1. Program materials: A. Normal goods Jiaoku 6 months after the sale or not sold out. B. Although the normal product Jiaoku less than 6 months after, but there are concerns about deterioration. C. Normal goods with the specifications or other factors is not a library (abnormal items). D. Each batch of production of secondary products occurred. 2. E. order production Order canceled F. Super-system, when the short code mantissa. G. Production of secondary products that occur 3. H. Other Test products I. Re-sold as a secondary back. J. Other. (C) of the Materials Management Division should be summarized in the following month on the 5th fill Twenty-four delay product shipments Materials Management Division delay the receipt of the finished product business units designated Twenty-five storage management □ Accounts Materials Management Division received Twenty-six inventory (a) stock finished product should be regular or irregular inventory, inventory count by the accounting department will fill out the project according to the specification category the number of column. (B) the implementation of the computerization, the (C) the accounting department will be Head of sending business judged, was general manager of the proposed improvement measures with the nuclear decision. (D) the number of disk break through the nuclear referendum, opened by the Materials Management Division Twenty-seventh of Fire Services is strictly prohibited fireworks warehouse equipment,
doudoune moncler homme, warehouse material management subjects should be clear at the hanging, check again, if the malfunction or failure, should immediately apply for additional repairs, and fire training with the plant to increase capacity to respond.第二 eighteen warehouse management should note (a) of the warehouse should always be kept clean, and always pay attention to ventilation. (B) of the flammable materials, explosives, or prohibited goods shall not be brought into the warehouse, materials management subjects should always pay attention. (C) shall not smoke inside the warehouse, if the issues when the project requires welding, should be reported, and was allowed only after the select. (D) administered by Materials Management Division of the finished product inventory and warehouse equipment for use shall be responsible for security, if the damage should be reflected immediately in charge and immediately commissioned the repair. (E) without the approval of the relevant Head of Materials Management personnel shall not enter the warehouse, after moving, nor stay in the warehouse. (Vi) materials management officers leave at work, should visit the warehouse and power and water supply is opening and closing to ensure the safety of the warehouse. □ Supplementary Provisions Article nineteen implementation and management guidelines were revised after the implementation of the approved manager, when changes are made. Further reading: 1
1. 2
2. Wooden pallets
3
procurement tray References:
Open Category: Trays
christian louboutin cork Your peel namely maximum
Linear Mode
