Did no must work apt a studio

must remember that 20 kinds of PS technology! The United States will not do your photos!

have to remember that 20 species of PS technology! The United States will not do your photos!
a simple digital photo mending
1 open late pictures, like the implementation of color / saturation (-40) to dilute saturation.
2 new layer, the layer mode to soft light, with the brush tool will need to polish the part of the painting several periods, where you can accessible extract the color palette used
3 pictures soft color transition is insufficient, then almost the implementation of the following Gaussian blur filter (+85)

simple with photos came to light less than
1 Open the image, copy the background layer, change the background color filter layer pattern of the background
2 Levels adjustment layer

30 秒 get Plmm
1 Open the Photo Art photo, copy the background layer twice
2 for reproducing the background layer a Gaussian Blur (radius of 4 to 6), Copy the background layer to the second mode of light
3 new layer, add filling pattern (a semi pre-defined gray well and half white horizontal stripe pattern), set the blending mode to Multiply

image displacement effect
1 Open the picture, a new layer, select the View - the ruler, select the move tool, respectively, from the altitude and bottom drag out the two blue markings (9 cell)
2 Using the rectangle selection tool, fill the carton (dark gray 1,9, 5,7 black, 3 light gray) to psd format, and then close the document
3 to Filter - distort - the replacement, select the retention psd File
Notes (black (color value = 255) is the largest affirmative displacement, that is the corresponding image pixel to the right and down; gray (color value = 128) did not generate transmission)

photo shading effect
1 Open the picture, Select - Select All, then Edit - Copy, establish a new aisle, Edit - Paste to glue the copied images into the new aisle]
2 implementation of the image - adjustment - Anti-like, back to RGB channel, edit - remove, delete the original image
3 to Select - Load Selection, phone the new channel, Executive Editor - fill (the color)

atomization
1 Open the picture , a new layer, set foreground / background color (black / white), to Filter - Render - Clouds, will add a layer mask layer
2 Repeat the filter - render - clouds, image - Adjustment - Brightness / Contrast (80,0, a mode to color filter layer)

character illustrator effects
1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray , +30, +60, +10, monochrome), the implementation of the filter - stylize - find edges, remove the rumpus
2 Levels of miscellaneous mode to %
3 background layer add a Levels adjustment layer, accommodate the output levels (0, +155) the implementation of manner, color image Marxist
4 - adjustment - optional color, fine-tuning of color (red, 0, +100, +100, -75; yellow, 0, -40, +100, -40)

age photos using the color overlay to add light and color effects
1 Open the image,Buy Lacoste, copy the background layer Executive Image - adjust - to color, adjust brightness / contrast (-42, +18)
2 Add need to color (red), and then merge apparent layers
3 add filters - lens flare (brightness +100)
4 Duplicate the background layer, additional again, color background.
3 will blend mode to layer, and to add a mask
6 Select One of the original layer (Ctrl + J).
2. on the replication layer uses Gaussian blur filter (+4.0).
3. do color adjustments (+50,0, -64)
4 . with a blurred edge eraser expunge remove need fall butme.
5. the appropriate use layer blending modes.

create hazy in bright (landscape, ecological type)
1 Open the picture Duplicate the layer.
2 copies of the layer blending mode to U) (0, +12,0).
5 add some sharpening, reducing transparency.

a photo to add a glass effect
1 selected space, press Ctrl + J
2 on the shear layer Gaussian blur (+3.1 pixels).
3 to adjust color balance (-39, +29, +16).
4 new layer. Choose the thickness of the glass area add a custom gradient filling (black and white gray, the mandate is dark, glossy, dark, tall light), press Ctrl + T on the constituency to adjust the thickness of the glass.
5 filter - misrepresent - Glass , select your preference pattern (deformation, smoothness of 1, zoom 50%).

flaming periodical effect of the old photos - PS handling $
1 pure open a picture, the implementation of the image - adjustments - Hue / Saturation (+1, -58, +1).
2 image - adjustment - change (mid-tones, deeper yellow, deeper red highlights).
3 Duplicate the background layer, the implementation of filter Mirror - texture - particles (9,56, vertical).
4 new layer, to Filter - Render - Clouds.
5 and scamper the image - adjust - brightness / contrast (+27, +100 ).
6 with the Magic Wand, select one layer of black constituency.
7 off layer of a preview, click Copy the background layer, the foreground color to dark brown.
8 Select - Modify - Expand (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer 1, with the sorcery rod select the dark constituency
10 off the background layer and A preview of the layer, copy the background layer selected, Executive Editor - Clear.
11 images - the canvas size, altitude / width of one centimeter was additional, positioning (in).
12 opened the background layer Preview , select the background layer and fill the foreground color (light brown).
13 Duplicate the background layer selected, do Layer - Layer Style - projection. (positive end laminations, 45% opacity, angle 45, from 7 expand 2%, size 10).
14 merge all layers.

piebald effect of the additional arts border a new system of law
1 file by D key fill the background is white
2 Then, filters --- --- smokes rendering.
3 CTRL + M to adjust under the curve (high contrast black and white).
4 After completion of the effect of beyond afterward filter - distort - Glass (Distortion 7, 3, smoothness, texture - canvas, zoom 50%).
6 Create a new layer, the background is black, the other a new layer, add sufficient white rectangle.
7 layers in the implementation of the rectangle where the filter - distort - replacement, select the default option. Then find the newly saved PSD file can be replaced.

PS rendering the air of your photos (landscape)
1 Image - Adjust - Levels (RGB +29,1.0, +234). Form the implementation of Marxism
2 Color Hue / Saturation directive (full size -14, +41, -1).
3 continue to Hue / Saturation (red, hue values ​​decrease, increase saturation).
4 continue the hue / saturation (yellow, -22, +45, -1)
5 persist to Hue / Saturation (green, +15,0,0).
6 adjust the brightness / contrast (brightness reduce / increase contrast). Xingse tenet (
simple sketch effect
1 cozy to open picture, do to the color, adjust brightness / contrast (brightness diminish / amplify contrast).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation of the percolate - the style - detect the corner, then the UXXXXX sharpening, then
layer mode to Overlay.
3 new layer, fill White, Add Noise, then the motion blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%), erase some of the high light.

stroke sketch effect of drawing
1 Open one image, duplicate the background layer, select Layer 1 duplicate to Filter - Blur - Gaussian blur (2.0 pixel)
2 Duplicate the background layer again, select copy the map Layer 2, the implementation of the filter - sketch - watercolor pen (20,60,80), the layer blending mode to darken.
3 Duplicate the backdrop layer afresh, select Duplicate Layer 3, the foreground color set red, to Filter - Sketch - Sticky Notes (25,7,10), opacity is set to 30%.
4 Duplicate the background layer again, select Duplicate Layer 4, the foreground color set to black, foreground / background color set to black / white, and the implementation of the filter - sketch - copy (1,50), the Executive Levels adjustment (RGB, 157, .0,159), filled with the value of 30%.

simple way to do special photos
1 Open an image.
2 selected the blue channel in the channel, and then in the blue channel to Filter - Stylize - overexposed, you can point back to the RGB channel.

Matrix effects
1. Create a size of 500X300, RGB mode, the white background paper.
2. with a text input tool as channeling 01 randomly enter a code, reception CTRL + T to its perpendicular Come put whirl and pluck into a multi-copy digit ranging from small, casual area a few. Another method is to use filters, you can fulfill quite nice results. is the menu - Filter - Texture - particles, the intensity and compare are adjusted to 100,Lacoste Finham SPM Trainers, particle type culling vertically on it.
3. to those 01 code all the text layer and merge the background layer, and the foreground color R: 100, G: 255, B : 0 around the green, the background color set to black.
4 Select Menu - Filter - neon light effect, radiant size set to 10, brightness to 15.
5. Select Menu - Filter - Stylize - clarify the edge, the edge width is set to 1, the brightness set to 20, about the smoothness set to 1.
6. Select the menu - Image - adjust - brightness / contrast, the brightness to -10, the contrast transfer to 60 or so

Ps membrane, it would be mysterious and interesting color approximation. If used in the MM portrait photograph, will make even filled with a decadent decadent avant-garde colors.
1 Open the image, and let the right shows .
2-channel control panel option in the blue channel, into the accustomed.
3-channel control panel, select the green channel into the confirmed.
4-channel control panel in the red channel selection into the into the 6-channel control panel in the green channel selection into the , 220, confirm.
7 plebiscite in the red channel access control panel, go to +20 to confirm.
9 control panel in the channel all the RGB channel selected, work to +15, confirm
this post from the Zhongguancun online digital photography forum: < a href = ' http://dcbbs.zol.com.cn/ ' > http : / / dcbbs.zol.com.cn / < / a >, the post address: < a href = ' http://dcbbs.zol.com.cn/1 / 5_511.html ' target = ' _blank ' > http://dcbbs.zol.com.cn/1/5_511.html< / a >
This tutorial introduces the pink color photo of the location method. general color process: first with the color tool to send up the base color generally, and then gradually reinforce the need to highlight part of a single can if they feel appropriate to add some color complementary color.
1, open the original material, creating an optional color adjustment layer, set the following parameters:
Red: 23 -22 38 -41
yellow: 0 0 -26 0
2, Create a new layer, fill color: # 450D7D, layer blending mode to mode to gt; Gaussian blur, a worth of 5, determined to blend mode to portion of the background and personalities rub the skin out
6, copy the layer of the present layer, layer opacity to: 30%.
7, create a curves adjustment layer, slightly a little brighter.
8, build a new wafer, behind floor. fitting to the persona below the peel mill, choose the Dodge tool apt diagram painted face some of the high-light a little brighter.
9, create a curves adjustment layer, adjustment of the blue ( left half-cell, lower right half-cell) to determine and then create the brightness / contrast adjustment layer (0 6)
10, create a new layer fill color: # 021D60, layer blending mode to opacity to: 10%
11,Lacoste R75 P2 Trainers, press Ctrl + Alt + ~ tune out the high-light some of the constituencies, create a new layer filled with white, the layer opacity to: 5%.
12, hook pen the lips part, due eclosion after hours create color balance adjustment layer, slightly a little brighter
13, to create the brightness / contrast adjustment layer (0 3)
14,Lacoste Trainers, create a curves adjustment layer (lower right half of the Blue grid).
15, create a Hue / Saturation adjustment layer (0 -5 0)
16, create a new layer, sealed layer. layer blending mode to opacity to: 30%, with a layer mask to retain only the top of the other parts of the wipe with a black brush.
final adjustment of the overall color, completion of the final results.

1. Open the picture , shuffled into the sky material, the opacity set to 20%, and the solution map with the mask (this step can be disregarded, yet the huge blank sky must add Oh)

2. a new layer back implementation of channel mixing control operation, the blue channel value is set to 0,0,85

3. the implementation of the Hue / Saturation action, the saturation values ​​down to -15

4. base more gray renderings, the implementation of the brightness / contrast operating
Brightness: -8 Contrast: 5

5. a new layer fraught with white, the layer mode to Overlay and Opacity set to 30%

6. copy the white layer and the layer mode to Soft Light and Opacity to 20%

7. create a new layer, set foreground color to white, with the prospect to Transparent gradient discolor from the sky to the human lingered

8. create a new layer, back layer, the implementation of image treatment petitions, the data set as follows
channels: red color mixing: Color mixing is not real transparency: 8%

9. increase the effect of map layers, fulfil another Levels adjustment
Input Levels: 29 1.32 255
10. on the text, completed.

this tutorial describes prevalent color gradient picture product methods. process is very simple, create a new layer or another color gradient, and then adjust the layer blending modes and layer opacity to. But in order to cope with this effect, but also need to add some decorative elements such as stars and some fantastic decorating brushes. some people need a simple whitening and dermabrasion.
topaz filter and some brush commonly used on both the www.68ps.com download, you can also Baidu quest.
1, to form good habits. Copy a layer (ctrl + J), then copy the filter layers after the treatment, the paper applied to the Topaz filter, set the following parameters: sharp: 2.10, range: 1, the corner embrittlement: 2.23, noise density: 1.57.
2, selection of rubber, and then add a mask to the layer of mask treatment: where the filters do not need a simple wash see with a rubber to achieve the effect you absence. Here I am only small changes with the Department, to dodge also many filters to the face after the results.
3, add a color balance adjustment layer (-30, 26, 37)
4, add a rainbow gradient, transparency 75%, mode is set to: Soft Light (The Rainbow gradient what is it? is one of 7 colors of the gradient, the gradient inside the system to distinct, and if the color does not Satisfaction can also be their new one, if necessary new then amuse leave a information.)
5, the final is dotted, you can use your favorite brush lightly brush a few times, the key is to have fantastic feeling, which requires fuzzy , the new layer of good brush pen Gaussian blur on this layer like a

1, open the original material, a layer of the background layer copy, appropriate to the character resurfacing (dermabrasion thousands and thousands of ways to not elaborate, there are many online image processing software aiding, NIKON comes with that on the good, novice proposition Mito Xiu Xiu, lighting and the like, can fast deal with the skin, and then enter the regional PHOTOSHOP management.)
2, create a curves adjustment layer, adjustment of the red and blue (red micro-light, lighter shades of blue, simply method that the red curve on the side, blue or lower)
3, Press Ctrl + Alt + ~ tune out the high-light selection, press Ctrl + Shift + I invert the selection, then create a curve adjustment layer, adjustment of blue (Input: 231 Output 249 this value will want you to move out under the curve, but also do not understand, then say this is the upper left half of grid points, the lower half of the right end of grid)
4, create a new layer with white to transparent gradient out of a radial gradient, and then fill to the layer : 31%.
5, create a new layer, or with white gradient, the place is in the upper right corner of the screen to light that does not figure the way of the layer fill to: 78%.
6, to create Optional color adjustment layer, prefer black,Lacoste Canvas Trainers, values ​​are: Yellow: -5 / White: -6 / Yellow: +7
7, create a color equilibrium adjustment layer, select the high-light, value: yellow: -5, red : +5, determined to complete the final results.

1, 1st open the elemental, and some blemishes on the skin to mend, to make a gradient chart mediation layer, color settings shown, this system comes with the color, the conviction In the previous tutorial has been said, no repeat it here, and merged color transparency 27%, emulated by color and color balance to do the mediation layer, navel intonation, 0 / +4 / -20 /,Womens Lacoste Observe Trainers, no to nourish sunshine, do this after tread 2, get the right pattern efficacy

2, complete the 2 steps above, you can choose to merge or not merge layers, I am act a tutorial, while Lennon was shot to assist the merging of all layers , and we continue, a new blank layer, the default foreground color, set the Gradient tool for shown in the drawing a blank layer gradient, mixed-mode darken, relying on your graded the severity of the opacity, depending on the purpose of this step is the oppression of dark turns , then make adjustments Levels: 5/1.13/248, made a slight increase for the contrast effect of the end of step temporarily pictures

3, merge, copy the background, color balance adjustment, not to maintain brightness, midtones : -19 / +16 / 0, as we continue to change the cilia to retain details of the Blend Mode to Color, Curves shown in Figure (186.200/67.56) to change the opacity of 60% of the background of maximum students a copy of money, proper sharpening, changing canvas size of the layout, effect on the well in this circumstance, this a.m., said gradient map tool is mainly the use of value only for the purposes of this tutorial material

1, open the original material, press Ctrl + J to background Copy a layer of layer, press Ctrl + M to adjust the curve, select . add layer mask, with soft black brush angle some very bright part of the rub. the purpose of this step operation is to lighten some of the layer.

3, create a new layer, fill color : # 0d0537, blend mode to 5, select the menu: Layer New Adjustment Layer > > optional color parameter settings are as follows (note that means are selected : -68 5 31 -100
Green: 100 -100 5 100
Magenta: 6 0 1 100
White: 100 -18 20 0
neutral colors: 26 8 -6 11
6, then select the menu: Layer New Adjustment Layer > > optional color parameter settings are consist in ... (remember must be relating):
Yellow: 25 13 -37 23
Green : -100 0 -100 100
7, select the menu: Layer New Adjustment Layer > > color balance, set parameters as usual:
Midtones: -11 1 18
nail chosen point eraser wipe out the middle (do corner vignetting effect)
10, ambitioning to add text to add text, merge all layers, filters - sharpen-usm sharpening, the default value. achieved do not like you can not sharpen sharpening. very uncomplicated tutorial PS color, primarily using PS

1, open the original image, select - image mode - lab color
2, in lab prototype into the channel, select a channel (what is select a channel, many apprentices do not comprehend this problem, an mistake led to the selection of the layer, the so-called select a channel that you want to use the mouse left-click the channel layer, so that the channel convert the current going channel), then press and hold the left mouse button click on a channel ctrl marquee
3, select reverse (Ctrl + shift + I), and copy (Ctrl + C), select the b channel, hold down the ctrl Click the left mouse clasp and then paste the marquee b channel (Ctrl + V) the image mode back to RGB color
4, image - apply image - channel (blue) - Mixed (brighter)
5, Image - Adjust - Photo Filter - Dark Yellow - concentration - 15 - kept brightness, color complete.

one. open the picture, copy the background layer.
about what to adjust the brightness curve (his master), hue / saturation (+12, specific own hands, because no picture is identical to the effect of bright can a)

II. the image mode to Lab mode (not flattened), the image - apply image (a channel, soft, 60%), then the image mode back to RGB

III. Finally, a little picture adjustments parameters favor color, so that a more harmonious color! (if you're cozy, you can not convey), the merger is completed!
1, open the original material, creating an optional color adjustment layer, set the retinue parameters:
Red: -2 -11 28 0
yellow: 0 -10 9 0
Green: 91 -18 -100 29
White: -19 -22 4 0
2, and then create Select Color adjustment layer, set the following parameters:
Green: 100 35 -30 0
Yellow: -7 0 49 0
3, to establish a curve adjustment layer, which provides shine. (to curve upward curve that is can, or will reason overexposure)
4, create a new layer, fill color: # 5729CE, layer blending mode to Ctrl + Alt + ~ tune out the high-light selection, create a new layer filled with white
6, create a new layer, press Ctrl + Alt + Shift + E back layer, do: Fuzzy & filter > gt; Gaussian blur, a value of 5, determined to blend mode to Input: 230 Output: 255)
8, 8, create a new layer, reception Ctrl + Alt + Shift + E back layer. Implementation: Fuzzy > > Gaussian blur filter, mathematical 5, is insistent to blend mode to point, and then click the appropriate sharpening to complete.

1, open your material
2, copy the background layer 2, layer one to color (ctrl + shift + u)
3, Second, the color filter layer pattern of reduced transparency 60
4, in the second layer above and a new color balance, color scale value is 0210, and the second layer grouping (ctrl + G)
5 , add a solid color, value R: 67 G: 44 B: 0, mode reduces light transparency 50
6, complete, simple, right