Office Professional 2010 Key 700-HP UltraHigh-Po

Concert Series: MSL-6 | PSW-6 | CQ-1 | CQ-2 | MSL-4 | DS-4P | DF-4 | 700-HP | 600-HP | 650-P PSW-2-->
700-HP : UltraHigh-Power Subwoofer

Features & Benefits
•
Stackable
•
Flyable using optional rigging kit
•
Extremely low distortion for ultimate low-frequency clarity
•
Very high peak electrical power yields excellent transient reproduction
•
Ultra-efficient neodymium magnet drivers
•
Transportable in blocks using optional heavy duty caster frame

Applications
•
Stadiums, arenas and concert halls
•
Medium-to-large theatres and clubs
•
Theme parks
•
Cinema

The Meyer Sound 700-HP ultrahigh-power subwoofer sets a new standard for the power-to-size equation. The 700-HP's energy and bandwidth handle high continuous operating levels and extreme transient information with minimal distortion in its operating frequency range.

Meyer Sound’s rigorous design approach has been applied to extract the greatest efficiency from every part of the system, resulting in the 700-HP’s effortless reproduction of low frequency transient information. As a self-powered system, the transducers, amplification and control electronics of the 700-HP are created as a symbiotic system that optimizes performance and maximizes its tremendous energy.

The operating frequency range of 28 Hz to 150 Hz complements other Meyer Sound loudspeakers and line and curvilinear arrays in sound reinforcement applications requiring maximum headroom at the low end of the frequency spectrum.

The 700-HP's efficiently tuned cabinet houses two Meyer Sound-designed and -manufactured back-vented, long-excursion Office 2007 Enterprise Key, 18-inch cone drivers. Each driver capabilities a 4-inch voice coil and is rated to handle 1200 AES watts. The drivers have also been engineered for extreme efficiency Microsoft Office Standard 2010, using high-gauss neodymium magnets for the most powerful magnetic field strength. High magnetic field strength increases the driver’s sensitivity, which yields greater output, while keeping heat dissipation requirements within operational tolerances.

An integral two-channel class AB/H amplifier with complementary MOSFET output stages supplies total peak strength of 2250 watts (1125 watts per channel). With twice the amplifier strength of the 650-P subwoofer, the 700-HP produces an average of 3 dB more overall SPL, with enormous headroom to accommodate the most extreme demands with ease. Recent tests conducted by Meyer Sound show the 700-HP producing significantly higher output than other "high-power" subwoofers.

The amplifier Windows 7 Enterprise, control electronics and energy supply are integrated into a single, field-replaceable module mounted in the rear of the cabinet. The cabinet is constructed of multi-ply hardwood and coated with a textured black finish. Integral metal grilles lined with acoustical black mesh protect the cone drivers. Designed mainly for stage or ground placement, the stackable 700-HP includes plastic skids on the bottom of the unit, preventing damage to the enclosure or the unit below. The skids align with slots on the cabinet’s upper surfaces ensuring secure, aligned stacking. For maximum convenience in touring situations Office Professional 2010 Key, the 700-HP can even travel in stacks on the MCF-700 caster frame.

The 700-HP is truck-smart Microsoft Office Pro Plus, with exterior cabinet dimensions suitable for both European and US truck widths. An optional QuickFly rigging kit is available, installed at the factory or as a field upgrade. Up to 10 cabinets can be suspended from the optional MTG-700 top grid in a straight hang at a 7:one safety factor.

Options available for the 700-HP include weather protection and finishes in custom colors for fixed installations and other situations requiring specific cosmetics.

An optional RMS remote monitoring system module allows comprehensive monitoring of all key system parameters on any RMS-equipped host PC. In addition, Meyer Sound’s MAPP Online multipurpose acoustical prediction program allows quick prediction of coverage, frequency response, impulse response and maximum output of the 700-HP and other Meyer Sound loudspeakers and loudspeaker systems.

Datasheet

Operating Instructions

Options

QuickFly Rigging

Without rigging



Optional rigging



Optional rigging

700-HP Rigging Grid Assemby Guide

AutoCAD Files
3D / 2D

700-HP IN USE

Read stories about 700-HP »