Office Standard Hack Attack Install Leopard on y

,Office 2007 Professional Plus Key
Update : 2 : If you're searching for a manual to Dual Boot Windows Vista and Mac OSX Leopard, make sure you adhere to this guide Hack Assault : Dual Boot Leopard and Windows Vista. The Dual Boot Information is really a thorough guide and it need to function for most of you which has a tiny bit of difficult work.

Update : one : There's a newer model of this Hack that you just might need to have a look at. Its considerably more less complicated and may be completed by almost everybody. The more recent hack also incorporates Mac OSX 10.5.one so please take a look at Hack Assault : Install Leopard On your Computer in only One Action.

Well its been only per day because the Mac OSX Leopard was launched officially by Apple and the hackers have managed to build a patched DVD that everybody like you and me can use to install Leopard on PC’s without having to buy a Mac. Make sure you note the tutorial that I am going to post is still experimental and things may possibly not work the right way simply because it is still early days in hacking Leopard to operate on PC’s. Nicely in the event you don’t mind your Computer getting screwed then go ahead and try out this tutorial.
Make sure you backup all important data before you proceed. Here are the things that you simply will need before Set up Leopard in your PC…
The Patched DVD Image
The zip file containing the patch
1 pen drive or USB Flash Drive formatted as FAT32
Well once you have all these you can go ahead and Install Leopard..
Step one. Getting things ready
Burn the DVD Image onto a Single Layer DVD-R using a software like Nero.
Format the USB Flash Drive as well as the drive label really should be “Patcher” without the quotes. Make sure you note it has to be “Patcher” only and nothing else for the patch to operate when we apply it later.
Extract the Zip file and put its contents into the USB Flash Drive.
Now your USB Drive should contain a folder called “files”,Office Standard 2007, if it doesn’t then check to see where you have gone wrong.

Stage 2. Installing Leopard
Now that you just have the Patched DVD with you, you can now install Leopard. Pop in the DVD into the drive and boot into it by pressing F12 at the BIOS Prompt.
Boot into the DVD as well as the installer should now load. It take a while though,Office Standard, so be patient.
Select your Language and make sure you select Customize and you need to deselect all the packages that are displayed.
Leopard will now install. This can take a while, so go grab yourself a coffee.
It will ask you to Reboot, so go ahead and Reboot. Before rebooting make sure that USB Flash Drive is connected to the Personal computer.

Step 3. Patching Leopard
Now which you have got Leopard installed,Office Enterprise 2007, you need to patch it. Before we do that Boot into the Leopard DVD like the way you did before.
Wait for the Darwin Bootloader to load. Once it loads up press F8. You should now see a prompt. Type -s and hit enter. The DVD will now load in Verbose mode. Watch for any errors. It should load without a problem because you have already installed Leopard.
Once the setup is loaded select your Language. Once carried out you ought to now be seeing the Welcome Screen. Once there navigate to Utilities-Terminal.
Once the terminal loads up, you now need to browse to your USB Drive,Office 2010 Activation, so follow the steps below, typing it exactly as it appears below in the Terminal.
In the command line type the following as they appear here
cd ..
cd ..
cd Volumes
cd Patcher
cd files
Notice the space between cd and also the two dots.
Now its the time to run the patcher to make sure Leopard will perform on your Pc. Type the following into the Terminal.
./9a581PostPatch.sh
The Patch ought to now run. You can answer Yes while removing the ACPUPowerManagement.kext
After the Script is accomplished, you need to now be able to Boot into Leopard after you restart.

Stage 4. Congratulations! You’ve done the Impossible!

Well that was it. Please note this has not been extensively tested, so the majority of your Hardware like Sound, Network may not function. If something goes wrong for you or you wish to help us, then make sure you join the discussion over at OSX86Scene. In case you noticed I haven’t posted the links to the Torrent that contains the DVD image and also the zip. Properly I haven’t posted them because I am sure the lawyers over at Apple are going to sue the hell out of me. If you wondering where you can find them, then head over to Demonoid and search for it.
Well here are few screenshots by Mac.nub over at the forums who could get Leopard working on his system.
Some Updates and Clarifications :
This Hack works on Intel PC’s with atleast SSE3
You need to format your Leopard Partition to HFS+
Make Sure you install Leopard on MBR and not GUID or it won’t boot.
Far more Patched DVD’s from Uphuck, Netkas is in the works so it would be better if you wait for the polished releases to come out.